Magnavox TB110MW9 User manual, English (US) - Page 20

Advanced Operation Adjusting Antenna Selecting Display Mode You can verify the signal strength of each channel. 1 Select a channel to adjust using [the Number buttons] or [CH K / L ]. 2 Press [SETUP]. 3 Select "CHANNEL" using [ K / L], then press [OK]. 4 Select "ANTENNA" using [ K / L], then press [OK]. CHANNEL EXIT CHANNEL TIME DETAIL INITIAL ADD/DELETE ANTENNA ADD/DELETE RF OUT • STB starts receiving the signal for the channel. 5 By referring to the on-screen indication, adjust the antenna's direction to get the best reception. Status bar: Stretches to the right as the signal strength gets stronger. ANTENNA EXIT CHANNEL TIME DETAIL INITIAL WEAK NOW 10 BACK 10.1 STRONG 50 PEAK Peak indicator: Indicates the highest strength ever reached. To adjust other channels: Select the channel using [CH K / L ], then adjust it. 6 Press [SETUP] to exit. You can adjust the aspect ratio of the digital TV program to fit your 4:3 TV monitor. Display Mode 1 Press [SETUP]. 2 Select "DETAIL" using [ K / L], then press [OK]. SETUP EXIT CHANNEL TIME DETAIL V-CHIP CLOSED CAPTION DISPLAY MODE LETTERBOX AUTO POWER DOWN 4 HOURS INITIAL 3 Select"DISPLAY MODE"using [ K / L], then press [OK]. DETAIL EXIT CHANNEL TIME DETAIL V-CHIP CLOSED CAPTION DISPLAY MODE LETTERBOX AUTO POWER DOWN 4 HOURS INITIAL 4 Select the desired display mode using [ K / L], then press [OK]. * Descriptions of each settings are explained in the "Information on Display Mode" on the next page. Select display mode. LETTERBOX ZOOM FULL 5 Press [SETUP] to exit. 20 EN