Magnavox ZC320MW8 Owners Manual - Page 77

Introduction Connections Basic Setup TROUBLESHOOTING Symptom Remedy Playback The disc does not play back. • No disc is inserted. • A blank disc is inserted. • The disc is upside down. Insert the disc with the labeled side facing up. • The disc is not correctly inserted. • The unit cannot play back certain discs (such as a CD-ROM) (page 37). • The region code on the DVD-video does not match the unit (page 37). • Moisture has condensed inside the unit. Remove the disc and leave the unit turned on for about 2 hours until the moisture evaporates (page 4). • If the disc was recorded on another recorder, the unit cannot play back the disc if it was not finalized. Discs recorded on this unit cannot be played back on other DVD players. • If you are using DVD+R, DVD-RW/-R disc, please ensure you finalized the disc after recording (page 35). The disc does not start playback from the beginning. • Resume playback was activated (page 43). Press [STOP C] twice. • You have inserted a disc whose title menu or DVD menu automatically appears on the TV screen when it is first insert. The unit starts playing back the disc automatically. • The DVD-video features an auto playback function. Some functions such as stop, search, or slow-motion playback cannot be performed. • Depending on the disc, you may not be able to do some of the operations. Refer to the manual supplied with the disc. The language for the sound track • The title does not have the multilingual audio tracks. cannot be changed. • The DVD-video prohibits the changing of the language for the sound track. The subtitle language cannot be • Multilingual subtitle are not recorded on the DVD-video. changed or turned off. The angles cannot be changed. • Multi-angles are not recorded on the DVD-video being played back. • The angle-change operation is whenever possible as long as the disc contains a multi-angle portion. Actual change will be performed when the portion has come up. • The DVD-video prohibits changing angles. • Try changing the angle using the DVD-video's menu. Recording / Timer recording / Editing Nothing was recorded even • There was a power failure during recording. though you set the timer setting • The unit's internal clock stopped due to a power failure that lasted for more correctly. than 30 seconds. Reset the clock (page 19). • The program contains copy protection signals that restricts copying. • The timer setting overlapped with another setting that has priority. Recording does not stop immediately after you press [STOP C]. • It may take a few seconds for the unit to input disc data before recording stops. Timer recording is not complete or did not start from the beginning. • The timer setting overlapped with another setting that has priority (page 27). • Disc space was not enough. Recording Playback Editing Function Setup Others Español EN 75