Magnavox ZV420MW8 Owners Manual - Page 31

Introduction Connections Basic Setup SATELLITE LINK 8 Press [OK]. "To Standby Mode" is highlighted. 9 Press [OK] again. Satellite Link Start 5:00PM DVD VCR DVD Mode SP (2Hr) To Standby Mode In a second, the unit will be turned off automatically as it goes into the satellite link standby mode. To cancel the satellite link function while in the satellite link standby mode: Press [TIMER SET] to turn on the unit. To cancel the satellite link function while the satellite link recording is in progress: Press [STOP C] on the front panel of the unit. Recording Playback Editing Function Setup VCR Functions Others Notes • If the signal of external input breaks up over 5 seconds, satellite link function will be canceled. • If you have not set the clock, "Clock Setting" menu will appear at step 3. Follow to step 3 in "Clock Setting" on page 21. • You cannot set the end time for the satellite link timer recording on this unit. • Recording picture will be distorted if the copy protection signal is being detected during satellite link timer recording. • You can record the satellite link by using S-video input jacks on the rear panel. Refer to page 13 for more information. • When a regular timer recording and the satellite link timer recording are overlapped, those recordings are recorded as illustrated below. • Press [TIMER] during the satellite link timer recording to check the satellite link timer recording in progress. example 1 example 2 example 3 timer recording satellite link actual recording The first 2 minutes (at the longest) will be cut off. timer recording satellite link actual recording timer recording satellite link actual recording The first 2 minutes (at the longest) will be cut off. EN 31 Español