Magnavox ZV420MW8 Owners Manual - Page 84
OPEN/CLOSE, The disc canceled during the, repairing process MAY NOT work., TRACKING
UPC - 053818570487
View all Magnavox ZV420MW8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
TROUBLESHOOTING Symptom "Repairing" appears on the TV screen. Repairing D In a case you intend to cancel the V repairing process. D Do you want to cancel a repairing process ? When selecting "Yes", the disc may not be usable. Yes No Repairing Remedy • If there is a power failure or unplugging during recording, finalizing, formatting or editing (even after "Repairing" disappears), a repairing process will begin automatically just after turning the unit on again. It may take several minutes up to about several hours. • If you intend to cancel the repairing process, press [OPEN/CLOSE A] on the front panel, then select "Yes" and press [OK]. After that, press [OPEN/CLOSE A] to take out the disc. The disc canceled during the repairing process MAY NOT work. Picture noise appears. • Head cleaning for VCR may be necessary. Refer to "Auto head cleaning" (page 5). • Adjust tracking control for better picture by pressing [TRACKING / ] while you are playing back a cassette tape. V The cassette tape does not play back. • No cassette tape is inserted. C Recording does not start after you • Make sure the cassette tape has a erase-protection tab when you record R press [REC I]. to a cassette tape. If needed, cover the hole with cellophane tape. The remote control does not function. • Check if a cassette tape is in this unit. The motor rotates even when playback / recording is stopped. • The motor may rotate for the duration of approximately 5 minutes for efficient operation. This is not a malfunction. 84 EN