Magnavox ZV427MG9 User manual, English (US) - Page 79

Introduction Connections Basic Setup Playback VCR FUNCTIONS One-touch Timer Recording (OTR) Recording Playback Editing 1) Press [STANDBY-ON y] on the remote control or the front panel of the unit. When you are playing back a cassette tape, turn the TV on and be sure to select the input to which the unit is connected. Press [VCR]. 2) Insert a prerecorded cassette tape. Press [PLAY B] to begin playback. 3) During playback, press [PAUSE F]. Playback will pause and sound will be muted. 4) Press [PLAY B] to resume playback. 5) Press [STOP C] to stop playback. 6) Press [STOP / EJECT C A] on the front panel of the unit to eject the cassette tape. Note • When a cassette tape without erase-protection tab is inserted, the unit will start playback automatically. • Tracking will be automatically adjusted upon playback. To adjust the tracking manually, press [TRACKING / ]. Recording Press [VCR] first. Before recording, make sure: • The appropriate external input position (E1/E2) to which your external tuner is connected is selected by pressing [SOURCE]. • There is a cassette tape with a erase-protection tab in the unit. • The desired recording mode is selected in SP (standard playback) or SLP (super long playback) mode by pressing [REC MODE]. Recording mode: Tape speed Type of tape Recording / playback time T60 T120 T160 SP mode 1hour 2hours 2-2/3hours SLP mode 3hours 6hours 8hours • Refer to pages 28-31 for instructions on timer recording. 1) Press [REC] to begin the recording. To temporarily stop recording or to resume it, press [PAUSE F]. After the unit has been in pause mode for 5 minutes, it will stop automatically to protect the cassette tape and the video head from damage. 2) Press [STOP C] when the recording is completed. Accidental erasure prevention To prevent accidental recording on a recorded cassette tape, remove its erase- protection tab. To record on it later, cover the hole with cellophane tape. erase-protection tab This feature allows you to set the recording length simply by pressing [REC] on the remote control. Press [VCR] first. 1) During normal recording, press [REC] to begin the one-touch timer recording. You can select a fixed recording time by pressing [REC] repeatedly. (Normal recording) (8:00) (0:30) (1:00) (7:30) When the one-touch timer recording is finished, the unit will turn off automatically. To change the recording length during the one-touch timer recording, press [REC] repeatedly until the desired length appear. To cancel the one-touch timer recording within the specified time, press [STOP C]. Note • To see the remaining recording time on the TV screen during the one-touch timer recording, press [DISPLAY]. • You cannot pause the one-touch timer recording. • If VCR the one-touch timer recording is completed during DVD playback or recording, the VCR will be in stop mode and the DVD keeps the current mode. • Unlike a timer recording, you can perform the following operations during the one-touch timer recording. - Turning off the power to stop one-touch timer recording. - Using [REC] or [STOP C]. • When the one-touch timer recording is finished and the power is turned off, the unit will switch to the standby mode automatically if a timer recording has been programmed. Press [TIMER SET] to cancel the standby mode for using the unit continuously. EN 79 Function Setup VCR Functions Others Español