Magnavox ZV427MG9 User manual, English (US) - Page 83
Frequently Asked Questions, Recording, Playback, Editing, Introduction, Connections, Basic Setup - remote code
UPC - 053818570722
View all Magnavox ZV427MG9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Introduction Connections Basic Setup Recording TROUBLESHOOTING Symptom There is no sound or the sound is D distorted. V D Remedy • The HDMI sound is not output when "HDMI Audio" is set to "OFF". • Check the RCA audio cable connection. If you are using HDMI-DVI conversion cable, you must connect the RCA audio cable, too. • Check whether the output format of this unit (HDMI FORMAT) matches the supported input format of other connected device. There is no picture. • If you connect the cable to S-VIDEO OUT/ COMPONENT VIDEO OUT / HDMI OUT jack, try connecting it to AUDIO / VIDEO OUT jack instead. Picture noise appears. • Head cleaning for VCR may be necessary. Refer to "Auto head cleaning" (page 5). V • Adjust tracking control for better picture by pressing [TRACKING / ] while you are playing back a cassette tape. C The cassette tape does not play back. • No cassette tape is inserted. R Recording does not start after you • Make sure the cassette tape has a erase-protection tab when you record press [REC]. to a cassette tape. If needed, cover the hole with cellophane tape. The remote control does not function. • Check if a cassette tape is in this unit. The motor rotates even when playback / recording is stopped. • The motor may rotate for the duration of approximately 5 minutes for efficient operation. This is not a malfunction. Frequently Asked Questions - Can I record to CD-RW/-R? - Can I play back DVD-video that is bought in another country? - Can I connect the unit to my PC? - Can I program a timer recording with external tuner? - Can I record one channel while watching another channel using an external tuner? - Can I change the channels on the external tuner using the remote control of this unit? No, this unit records only DVD. Possible when the region code of the disc is 1 and All. No, you cannot control the unit by PC. Yes, you can. Select "E1" or "E2" as your recording channel, and leave the external tuner on (pages 13, 2831). It depends on your connection configurations. For more details, please kindly contact at your local store. No. Changing the channels on the external tuner using this unit's remote control is not possible. You need to use the remote control supplied with the external tuner to change the channels on the external tuner. Playback Editing Function Setup VCR Functions Others Español EN 83