Makita 9565PC Owners Manual
Makita 9565PC Manual
 |
View all Makita 9565PC manuals
Add to My Manuals
Save this manual to your list of manuals |
Makita 9565PC manual content summary:
- Makita 9565PC | Owners Manual - Page 1
ENGLISH INSTRUCTION MANUAL Angle Grinder 9564PC 9564PCV 9565PC 9565PCV 9566PC 9566PCV DOUBLE INSULATION 008369 WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FU1 TURE REFERENCE. - Makita 9565PC | Owners Manual - Page 2
. Be sure that you understand their meaning before use. ･ Read instruction manual. ･ DOUBLE INSULATION ･ Wear safety glasses. ･ Only for EU therefore, also be used from sockets without earth wire. For Model 9564PC,9564PCV ENG101-1 For European countries only Noise The typical A-weighted noise - Makita 9565PC | Owners Manual - Page 3
Model; 9564PC,9564PCV Makita International Europe Ltd. Michigan Drive, Tongwell, Milton Keynes, Bucks MK15 8JD, ENGLAND GEA005-1 General Power Tool Safety Warnings WARNING Read all safety warnings and all instructions heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk - Makita 9565PC | Owners Manual - Page 4
Operations: 2. This power tool is intended to function as a grinder, sander, wire brush or cut-off tool. Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or - Makita 9565PC | Owners Manual - Page 5
contacting a "live" wire may make exposed metal parts of the power tool "live" and shock the or snagged rotating wheel, backing pad, brush or any other accessory. Pinching or shape for your selected wheel. Proper wheel flanges support the wheel thus reducing the possibility of wheel breakage - Makita 9565PC | Owners Manual - Page 6
or brush may expand in diameter due to work load and centrifugal forces. 23. When using depressed center grinding wheels, be sure to use only fiberglass-reinforced wheels. 24. Be careful not to damage the spindle, the flange (especially the installing surface) or the lock nut. Damage to these parts - Makita 9565PC | Owners Manual - Page 7
rules stated in this instruction manual may cause serious personal injury. SAVE THESE INSTRUCTIONS. Speed adjusting dial 1 the relationship between the number settings on the dial and the approximate rotating speed. For 9564PCV,9565PCV 008413 Number 1 2 3 4 5 min-1 (R.P.M.) 2,800 4,000 6,500 - Makita 9565PC | Owners Manual - Page 8
the wheel guard around 180°. Fasten it with the screw after pulling lever in the direction of the arrow for the working purpose. The setting angle of the wheel guard can be adjusted with the lever. To remove wheel guard, follow the installation procedure in reverse. Installing or removing depressed - Makita 9565PC | Owners Manual - Page 9
with wood cutting blades and other sawblades. Such blades when used on a grinder frequently kick and cause loss of control leading to personal injury. 15 008379 disc at an angle of about 15 degrees to the workpiece surface. During the break-in period with a new wheel, do not work the grinder in the - Makita 9565PC | Owners Manual - Page 10
carbon brush inspection and replacement, any other maintenance or adjustment should be performed by Makita Authorized Service Centers, always using Makita replacement parts. ACCESSORIES CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual - Makita 9565PC | Owners Manual - Page 11
11 - Makita 9565PC | Owners Manual - Page 12
Makita Corporation Anjo, Aichi, Japan 884754A221 12
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
 |
 |
1
ENGLISH
INSTRUCTION MANUAL
DOUBLE INSULATION
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Angle Grinder
9564PC
9564PCV
9565PC
9565PCV
9566PC
9566PCV
008369