Makita 9565PCV Instruction Manual

Makita 9565PCV Manual

Get Makita 9565PCV PDF manuals and user guides View all Makita 9565PCV manuals
Add to My Manuals
Save this manual to your list of manuals

Makita 9565PCV manual content summary:

  • Makita 9565PCV | Instruction Manual - Page 1
    ENGLISH (Original instructions) INSTRUCTION MANUAL Angle Grinder 9564PC 9564PCV 9565PC 9565PCV 9566PC 9566PCV DOUBLE INSULATION 008369 IMPORTANT: Read Before Using. 1
  • Makita 9565PCV | Instruction Manual - Page 2
    Be sure that you understand their meaning before use. ･ Read instruction manual. ･ DOUBLE INSULATION ･ Wear safety glasses. ･ Only for EU Sound power level (LWA) : 92 dB (A) Uncertainty (K) : 3 dB (A) Model 9565PC, 9565PCV Sound pressure level (LpA) : 82 dB (A) Sound power level (LWA) : 93 dB (A)
  • Makita 9565PCV | Instruction Manual - Page 3
    exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool Makita Corporation as the responsible manufacturer declare that the following Makita machine(s): Designation of Machine: Angle Grinder Model No./ Type: 9564PCV,9565PC,9565PCV
  • Makita 9565PCV | Instruction Manual - Page 4
    tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. 26. Follow instruction for lubricating and changing accessories. 27. Keep handles dry, clean and free from oil and grease. GEB033-7 GRINDER SAFETY
  • Makita 9565PCV | Instruction Manual - Page 5
    Threaded mounting of accessories must match the grinder spindle thread. For accessories mounted by pad for cracks, tear or excess wear, wire brush for loose or cracked wires. If power tool or accessory contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the
  • Makita 9565PCV | Instruction Manual - Page 6
    wheel flanges support the brush may expand in diameter due to work load and centrifugal forces. Additional Safety Warnings: 17. When using depressed centre grinding wheels, be sure to use only fiberglass- reinforced wheels. 18. NEVER USE Stone Cup type wheels with this grinder. This grinder
  • Makita 9565PCV | Instruction Manual - Page 7
    enough to accept the spindle length. 29. Check that the workpiece is properly supported. 30. Pay attention that the wheel continues to rotate after the tool or failure to follow the safety rules stated in this instruction manual may cause serious personal injury. FUNCTIONAL DESCRIPTION CAUTION: •
  • Makita 9565PCV | Instruction Manual - Page 8
    Refer to the below table for the relationship between the number settings on the dial and the approximate rotating speed. For 9564PCV, 9565PCV Number 1 2 3 4 5 010478 For 9566PCV min-1 (R.P.M.) 2,800 4,000 6,500 9,000 12,000 008414 Number 1 2 3 4 5 min-1 (R.P.M.) 4,000 5,000 6,500 8,000 10,000
  • Makita 9565PCV | Instruction Manual - Page 9
    the arrow for the working purpose. The setting angle of the wheel guard can be adjusted with : • Use sander accessories specified in this manual. These must be purchased separately. Mount the and other sawblades. Such blades when used on a grinder frequently kick and cause loss of control leading to
  • Makita 9565PCV | Instruction Manual - Page 10
    an angle of about 15 degrees to the workpiece surface. During the break-in period with a new wheel, do not work the grinder in the B direction. Operation with wire cup brush / wire bevel brush (optional accessory) 1. Wire cup brush 1 CAUTION: • Check operation of brush by running tool with no load,
  • Makita 9565PCV | Instruction Manual - Page 11
    During cutting operations, never change the angle of the wheel. Placing side pressure your Makita tool specified in this manual. The brush inspection and replacement, any other maintenance or adjustment should be performed by Makita Authorized Service Centers, always using Makita replacement parts
  • Makita 9565PCV | Instruction Manual - Page 12
    884754F221 Makita Corporation Anjo, Aichi, Japan www.ma12kita.com
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
1
ENGLISH (Original instructions)
INSTRUCTION MANUAL
DOUBLE INSULATION
IMPORTANT:
Read Before Using.
Angle Grinder
9564PC
9564PCV
9565PC
9565PCV
9566PC
9566PCV
008369