Makita HM0870C Owners Manual
Makita HM0870C Manual
 |
View all Makita HM0870C manuals
Add to My Manuals
Save this manual to your list of manuals |
Makita HM0870C manual content summary:
- Makita HM0870C | Owners Manual - Page 1
ENGLISH (Original instructions) INSTRUCTION MANUAL Demolition Hammer HM0871C HM0870C DOUBLE INSULATION 010450 WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FU1 TURE REFERENCE. - Makita HM0870C | Owners Manual - Page 2
HM0871C HM0870C meaning before use. ･ Read instruction manual. ･ DOUBLE INSULATION ･ Only tool is intended for chiselling work in concrete, brick, stone and asphalt as well as for driving and compacting with appropriate accessories. ENF002-1 Power supply The tool should be connected only to a power - Makita HM0870C | Owners Manual - Page 3
in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. Work area safety 1. Keep work area clean and well lit. Cluttered - Makita HM0870C | Owners Manual - Page 4
your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. 26. Follow instruction for lubricating and changing accessories. 27. Keep handles dry, clean and free from oil and grease. GEB004-6 HAMMER - Makita HM0870C | Owners Manual - Page 5
instruction manual may cause serious personal injury. FUNCTIONAL DESCRIPTION CAUTION: • Always be sure that the tool show trouble. Once operation starts with a bit against service indicator lamp flickers up when the carbon brushes are nearly worn out to indicate that the tool needs servicing - Makita HM0870C | Owners Manual - Page 6
grip (auxiliary handle) 1 010494 Insert the bit into the tool. Turn the bit and push it in until it engages. 1. Releasing cover 1 010489 If the bit cannot be pushed in, remove the bit. Pull the releasing cover down a couple of times. Then insert the bit again. Turn the bit and push it in until it - Makita HM0870C | Owners Manual - Page 7
the bit is not installed on the tool. OPERATION Chipping/Scaling/Demolition CAUTION: • Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance. Lubrication CAUTION: • This servicing should be performed by Makita Authorized Service Centers - Makita HM0870C | Owners Manual - Page 8
for more details regarding these accessories, ask your local Makita Service Center. • Bull point (SDS-max) • Cold chisel (SDS-max) • Scaling chisel (SDS-max) • Clay spade (SDS-max) • Bit grease • Safety goggles • Hammer grease • Plastic carrying case 1 2 010461 Connect the connector firmly - Makita HM0870C | Owners Manual - Page 9
9 - Makita HM0870C | Owners Manual - Page 10
10 - Makita HM0870C | Owners Manual - Page 11
11 - Makita HM0870C | Owners Manual - Page 12
Makita Corporation Anjo, Aichi, Japan 884928-224 12
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
 |
 |
1
ENGLISH (Original instructions)
INSTRUCTION MANUAL
DOUBLE INSULATION
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Demolition Hammer
HM0871C
HM0870C
010450