Makita HM1500B Owners Manual

Makita HM1500B Manual

Get Makita HM1500B PDF manuals and user guides View all Makita HM1500B manuals
Add to My Manuals
Save this manual to your list of manuals

Makita HM1500B manual content summary:

  • Makita HM1500B | Owners Manual - Page 1
    Demolition Hammer MODEL HM1500B DOUBLE INSULATION 002883 INSTRUCTION MANUAL WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. www.makitatools.com
  • Makita HM1500B | Owners Manual - Page 2
    Net weight HM1500B 1,300 807 mm (31-3/4") 19 kg (42 lbs) • Manufacturer reserves the right to change specifications without notice. • Specifications may differ from country to country. GENERAL SAFETY RULES USA002-2 (For All Tools) WARNING: Read and understand all instructions. Failure to
  • Makita HM1500B | Owners Manual - Page 3
    of moving parts, breakage of parts, and any other condition that may affect the tools operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools. 22. Use only accessories that are recommended by the manufacturer for your model. Accessories that
  • Makita HM1500B | Owners Manual - Page 4
    24. When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance instructions may create a risk of electric shock or injury. USE PROPER EXTENSION CORD: Make sure your extension
  • Makita HM1500B | Owners Manual - Page 5
    no one is below when using the tool in high locations. 8. Hold the tool firmly with both hands. 9. Keep hands away from moving parts. 10. Do not leave the tool running. Operate the tool only when hand-held. 11. Do not point the tool at any one in the area when operating. The bit could fly out and
  • Makita HM1500B | Owners Manual - Page 6
    released. • Switch can be locked in "ON" position for ease of operator comfort during extended use. Apply caution when locking tool in "ON" position and maintain firm grasp on tool. To start the tool, simply pull the switch trigger. Release the switch trigger to stop. For continuous operation, pull
  • Makita HM1500B | Owners Manual - Page 7
    collar 002934 1 2 3 4 1. Bit 3. Tool holder 5. When the bit is retained 5 Fig.(1) 2. Tool retainer 4. When the bit is inserted Pivot the tool retainer back and slightly downward. Insert the bit into the tool holder as far as it will go. To securely retain the bit, return the tool retainer to its
  • Makita HM1500B | Owners Manual - Page 8
    by attempting to pull the bit out of the tool holder after completing the above procedure. • The bit without a collar cannot be retained by the method shown in Fig.(1). To remove the bit, follow the installation procedure in reverse. Chipping/Scaling/Demolition Hold the tool firmly with both hands
  • Makita HM1500B | Owners Manual - Page 9
    lubrication service. However, if circumstances require that you should lubricate it by yourself, proceed as follows. First, switch off and unplug the tool. 002973 Remove the plate 50 using a screwdriver, then replenish with fresh grease (60 g; 2 oz). Use only Makita genuine hammer grease (optional
  • Makita HM1500B | Owners Manual - Page 10
    use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita service center. • Bull point • Cold chisel • Scaling chisel • Clay spade • Rammer • Safety goggles • Hammer grease • Hex wrench • Steel carrying case
  • Makita HM1500B | Owners Manual - Page 11
    Memo 11
  • Makita HM1500B | Owners Manual - Page 12
    Memo 12
  • Makita HM1500B | Owners Manual - Page 13
    Cut Makita U.S.A., Inc. 14930 Northam Street La Mirada, CA 90638-5753 First-Class Postage Required Post Office will not deliver without proper postage. Fold 13
  • Makita HM1500B | Owners Manual - Page 14
    purchased from: Home Center Hardware/Lumber Store Tool Distributor Industrial Supply Construction Supply Other ( 3. Price Makita Brand Repair Service Durability Power Other ( ) 5. Any comments: Paste Paste Paste Paste Paste Paste Paste Paste DATE PURCHASED MONTH DAY YEAR MODEL
  • Makita HM1500B | Owners Manual - Page 15
    When you need service: Send complete tool (prepaid) to one of the Makita Factory Service Centers listed, or to an Authorized Makita Service Center. Be sure to attach a letter to the outside of the carton detailing the problem with your tool. Date Purchased Dealer's Name & Address Model No. Serial
  • Makita HM1500B | Owners Manual - Page 16
    develop during this one year period, return the COMPLETE tool, freight prepaid, to one of Makita's Factory or Authorized Service Centers. If inspection shows the trouble is caused by defective workmanship or material, Makita will repair (or at our option, replace) without charge. This Warranty
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
INSTRUCTION MANUAL
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
www.makitatools.com
Demolition Hammer
MODEL HM1500B
002883
DOUBLE
INSULATION