Makita SK104Z Makita SK104Z Instruction Manual
Makita SK104Z Manual
 |
View all Makita SK104Z manuals
Add to My Manuals
Save this manual to your list of manuals |
Makita SK104Z manual content summary:
- Makita SK104Z | Makita SK104Z Instruction Manual - Page 1
first time, please read carefully through the Safety Instructions and the User Manual. The person responsible for the instrument must ensure observing the correct polarity • Use alkaline batteries or rechargeable batteries only Makita SK104 1 Remove the batteries if the instrument is not to be - Makita SK104Z | Makita SK104Z Instruction Manual - Page 2
On/Set key 1. Laser functions Pressing the On/Set key 1 activates the following laser functions: Action 1x 2x SK104 not in Lock mode in Lock mode only horizontal line only horizontal line only vertical line only vertical line 3x horizontal and vertical line again as 1x 2 Makita SK104 - Makita SK104Z | Makita SK104Z Instruction Manual - Page 3
to transport or tilt the instrument beyond the self-levelling range. When locked, the pendulum is fixed and the self-levelling function is deactivated. Transportation and lock Self levelling Makita SK104 Pulse To be able to detect the laser lines over long distances (> 15 m) or in unfavourable - Makita SK104Z | Makita SK104Z Instruction Manual - Page 4
en Applications SK104 GB F I E P NL DK S N FIN J CN ROK PL HR H RUS CZ GR LT LV EST SLO SK M Operation TR Receiver available as accessory. 4 Makita SK104 - Makita SK104Z | Makita SK104Z Instruction Manual - Page 5
How to use the wall mount bracket: Makita SK104 5 Operation en GB F I E P NL DK S N FIN J CN ROK PL HR H RUS CZ GR LT LV EST SLO SK M TR - Makita SK104Z | Makita SK104Z Instruction Manual - Page 6
the instrument on a tripod half-way between two walls (A+B) that are approx. 5 m apart. Place the Lock switch 3 in the "Unlocked" ( ) position. Direct the instrument at wall A and switch on the instrument. Activate the horizontal laser line or laser dot and mark the position of the line or the dot - Makita SK104Z | Makita SK104Z Instruction Manual - Page 7
the instrument and align it with the bottom of the plumb line. Now read off the maximum deviation of the laser line from the top of the plumb line. If the difference does not exceed 2 mm, then the SK104 is within tolerance. Makita SK104 7 Operation en GB F I E P NL DK S N FIN J CN ROK PL HR - Makita SK104Z | Makita SK104Z Instruction Manual - Page 8
and all symbols flash. Outside of the self-levelling range: The laser beam is flashing. Pendulum locked: The laser beam is not levelled and the Lock symbol 4 lights up. Care and advice on operation 1 2 1.5 m B1 B2 max. 2 mm Set up the laser on its tripod or wall mount bracket near point A1 - Makita SK104Z | Makita SK104Z Instruction Manual - Page 9
Tripod thread -10°C to 40°C -25°C to 70°C 111 x 117 x 72 mm 470 g 1/4" * depending on lighting conditions Makita SK104 Range Range with detector Levelling accuracy @ 32 ft Self-levelling range Accuracy of horizontal line @ 32 ft Vertical accuracy @ 10 ft line length Number of laser lines - Makita SK104Z | Makita SK104Z Instruction Manual - Page 10
to be used in a technically correct and efficient manner. Permitted use • Projection of horizontal and vertical laser lines and laser dots Prohibited use • Using the product without instruction • Using outside the stated limits • Deactivation of safety systems and removal of explanatory and hazard - Makita SK104Z | Makita SK104Z Instruction Manual - Page 11
and the instructions in the User Manual. • To be familiar with local safety regulations relating to accident prevention. Hazards in use ƽ CAUTION: Watch out for erroneous measurements if the instrument is defective or if it has been dropped or has been misused or modified. Carry out periodic test - Makita SK104Z | Makita SK104Z Instruction Manual - Page 12
PL HR H RUS CZ GR LT LV EST SLO SK M TR dance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference by Makita for compliance could void the user's authority to operate the equipment. Safety instructions 12 Makita SK104 - Makita SK104Z | Makita SK104Z Instruction Manual - Page 13
repetition frequency, PRF 10 kHz, cw Pulse duration 50 µs Beam divergence line 180° × 0.1° It is a Class 2 laser product in accordance with: • IEC60825-1: 2014 "Radiation safety of laser prod- ucts" Makita SK104 13 Safety instructions en GB F I E P NL DK S N FIN J CN ROK PL HR H RUS CZ
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
 |
 |
1
Start up
Makita SK104
en
GB
F
I
E
P
NL
DK
S
N
FIN
J
CN
ROK
PL
HR
H
RUS
CZ
GR
LT
LV
EST
SLO
SK
M
TR
User Manual
English
Before using the product for the first
time, please read carefully through
the Safety Instructions and the User
Manual. The person responsible for
the instrument must ensure that all users understand
these directions and adhere to them.
Contents
Start up
.....................................................................
1
Operation
.................................................................
2
Care and advice on operation
............................
8
Transport
..................................................................
8
Technical data SK104
...........................................
9
Safety instructions
..............................................
10
Start up
Inserting / replacing batteries
Pull the battery cover outwards to unlock the battery
compartment. Open the battery compartment cover and
insert the batteries, observing the correct polarity. Then
press the battery compartment cover back down until it
engages.
•
Insert the batteries observing the correct polarity
•
Use alkaline batteries or rechargeable batteries only
•
Remove the batteries if the instrument is not to be
used for a long period of time (to prevent corrosion)