Marantz AV7005 AV7005 User Manual - English - Page 18

ENGLISH DEUTSCH Connections FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA Important information • Make connections as follows before using this unit. Select an appropriate connection type according to the components to be connected. • You may need to make some settings on this unit depending on the connection method. Refer to each description for more information. • Select the cables (sold separately) according to the components being connected. NOTE • Do not plug in the power cord until all connections have been completed. • When making connections, also refer to the operating instructions of the other components being connected. • Be sure to connect the left and right channels properly (left with left, right with right). • Do not bundle power cords together with connection cables. Doing so can result in noise. Converting input video signals for output (Video conversion function) This unit is equipped with three types of video input connectors (HDMI, Component video and video) and three types of video output connectors (HDMI, Component video and video). Use the connectors corresponding to the components to be connected. This function automatically converts various formats of video signals input to this unit into the formats used to output the video signals from this unit to a monitor. GFlow of video signals for MAIN ZONEH Video device This unit Monitor Output HDMI connector Component video connectors Video connector Input (IN) HDMI connector Component video connectors Video connector Output (MONITOR OUT) HDMI connector Input HDMI connector Component video connectors Component video connectors Video connector Video connector Video device GFlow of video signals for ZONE2H This unit Monitor Output Input (IN) Output (MONITOR OUT) Input Component video connectors Component video connectors Component video connectors (OUT2/ZONE2) Video connector Video connector Video connector in Set as Necessary • Set when not using the video conversion function. "Video Convert" (vpage 70) • Set when changing the resolution of the video signal. "Resolution" (vpage 70) Component video connectors Video connector • The video conversion function supports the NTSC, PAL, SECAM, NTSC 4.43, PAL-N, PAL-M and PAL-60 formats. • The resolution of the video signal input to this unit's HDMI connector is the one set at "Resolution" (vpage 70). (1080p HDMI signals and 1080p component signals are output at 1080p, regardless of the setting.) • Resolutions of HDMI-compatible TVs can be checked at "HDMI Monitor 1 Information" or "HDMI Monitor 2 Information" (vpage 88). NOTE • HDMI signals cannot be converted into analog signals. • When a non-standard video signal from a game machine or some other source is input, the video conversion function might not operate. • Component video input signals cannot be converted into Video format. • A menu is output via the HDMI connector or component video connector. • When using component output terminal 2 for ZONE2 video signal output, set "Input Setup" - "Input Assign" - "Component" (vpage 69) in the menu to "ZONE2". 14