Marantz AV7005 AV7005 User Manual - English - Page 19

Simple version Basic version Examples of screen display • Menu screen • Status display screen When the input source is switched MENU Audio/Video Adjust Information Auto Setup Manual Setup Input Setup SVENSKA NEDERLANDS Important information When the volume is adjusted Adjust various audio and video parameters Input BD Mode STEREO Auto Master Volume -80.0dB Status display: The operating status appears briefly on the screen when the input source is switched or the volume is changed. NOTE • If you operate the menu while playing back 3D video content, the playback video is replaced by the menu screen. The playback video is not displayed behind the menu screen. • This unit does not show the status display while playing back 3D video content. Connecting an HDMI-compatible device You can connect up to six HDMI-compatible devices to the unit. HDMI function This unit supports the following HDMI functions: • 3D • Deep Color (vpage 109) • Auto Lip Sync (vpage 80, 109) • x.v.Color, sYCC601 color, Adobe RGB color, Adobe YCC601 color (vpage 109, 111) • High definition digital audio format • ARC (Audio Return Channel) • Content Type • CEC (HDMI control) Copyright protection system In order to play back digital video and audio such as BD-Video or DVD-Video via HDMI connection, both this unit and TV or the player need to support the copyright protection system known as HDCP (Highbandwidth Digital Content Protection System). HDCP is copyright protection technology comprised of data encryption and authentication of the connected AV device. This unit supports HDCP. • If a device that does not support HDCP is connected, video and audio are not output correctly. Read the user guide of your television or player for more information. ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH About HDMI cables • When a device supporting Deep Color signal transfer is connected, use a cable compatible "High Speed HDMI cable" or "High Speed HDMI cable with Ethernet". • When the ARC function is used, connect a device with a "Standard HDMI cable with Ethernet" or "High Speed HDMI cable with Ethernet" for HDMI 1.4a. HDMI control function (vpage 55) This function allows you to operate external devices from this unit and operate this unit from external devices. NOTE • The HDMI control function may not work depending on the device it is connected to and its settings. • You cannot operate a TV or Blu-ray Disc player/DVD player that is not compatible with the HDMI control function. About 3D function This unit supports input and output of 3D (3 dimensional) video signals of the HDMI 1.4a standards. For playing the 3D video content, a player, and a TV that support the 3D function of the HDMI 1.4a standards are required in addition to this unit. NOTE • If you operate the menu while playing back 3D video content, the playback video is replaced by the menu screen. The playback video is not displayed behind the menu screen. • This unit does not show the status display while playing back 3D video content. About ARC (Audio Return Channel) function The Audio Return Channel in HDMI 1.4a enables a TV, via a single HDMI cable, to send audio data "upstream" to this unit. NOTE • To enable the ARC function, set "HDMI Control" to "ON" (vpage 80). • ARC function is only supported for the HDMI OUT 1 connector. In order to use the ARC function, connect the television to the HDMI OUT 1 connector. • When connecting a TV that does not support the ARC function, a separate connection using an audio cable is required. In this case, refer to "Connecting a TV" (vpage 17) for the connection method. About Content Type The HDMI specification version 1.4a enables simple, automated picture setting selection with no user intervention. NOTE To enable the Content Type, set "Video Mode" to "Auto" (vpage 70). Advanced version Information 15