Marantz AV7005 AV7005 User Manual - English - Page 28

ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA Connecting to a home network (LAN) • This unit lets you play via your home network (LAN) music files stored on a computer and music content such as that from Internet radio. You can also operate this unit from a computer using the Web control function. • You can update by downloading the latest firmware from the Marantz website. For more information, on the menu, select "Firmware Update" (vpage 86). • See "Network Setup" on the menu (vpage 81) for more information on network setting. Cables used for connections Ethernet cable Cable (sold separately) Modem Computer Internet Required system nnBroadband internet connection nnModem Device that connects to the broadband circuit and conducts communications on the Internet. A type that is integrated with a router is also available. nnRouter When using this unit, we recommend you use a router equipped with the following functions: • Built-in DHCP server This function automatically assigns IP addresses on the LAN. • Built-in 100BASE-TX switch When connecting multiple devices, we recommend a switching hub with a speed of 100 Mbps or greater. nnEthernet cable (CAT-5 or greater recommended) • Use only shielded STP or ScTP LAN cable which is available at retailer. • Some flat type Ethernet cables are easily affected by noise. We recommend using a normal type cable. NOTE • A contract with an ISP is required to connect to the Internet. No additional contract is needed if you already have a broadband connection to the Internet. • The types of routers that can be used depend on the ISP. Contact an ISP or a computer shop for details. • Marantz assumes no responsibility whatsoever for any communication errors or troubles resulting from customer's network environment or connected devices. • This unit is not compatible with PPPoE. A PPPoE-compatible router is required if you have a contract for a type of line set by PPPoE. • Do not connect an NETWORK connector directly to the LAN port/ Ethernet connector on your computer. Router To WAN side To LAN port To LAN port LAN port/ Ethernet connector • If you have an Internet provider contract for a line on which network settings are made manually, make the settings at "Network Setup" (vpage 81). • With this unit, it is possible to use the DHCP and Auto IP functions to make the network settings automatically. • When using this unit with the broadband router's DHCP function enabled, this unit automatically performs the IP address setting and other settings. When using this unit connected to a network with no DHCP function, make the settings for the IP address, etc., at "Network Setup" (vpage 81). • When setting manually, check the setting contents with the network administrator. For connections to the Internet, contact an ISP (Internet Service Provider) or a computer shop. 24