Marantz AV7005 AV7005 User Manual - English - Page 75
Input Mode, Rename, Source Level, Playback Mode
View all Marantz AV7005 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Simple version Basic version SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH Input Mode Rename Default settings are underlined. Input Setup The input modes available for selection may vary depending on the input source. Setting items Input Mode Set the audio input modes for the different input sources. Setting details Auto : Automatically detect input signal and perform playback. HDMI : Play only signals from HDMI input. Digital : Play only signals from digital input. Analog : Play only signals from analog input. 7.1CH IN : Only signals input from the 7.1CH INPUT terminal will be played back. • This can also be set by pressing A/D on the remote control unit. • Each time A/D is pressed, the setting is changed as shown below. Decode Mode Set the decode mode for input source. BD DVD VCR SAT GAME AUX1 TV CD CDR Auto HDMI Digital Analog 7.1CH IN • "HDMI" can be set for input sources for which "HDMI" is assigned at "Input Assign" (vpage 69). • "Digital" can be set for input sources for which "Digital" is assigned at "Input Assign" (vpage 69). • If the input source is set to "TV" or "Game", it cannot be set to "Analog". • When digital signals are properly input, the indicator lights on the display. If the indicator does not light, check the digital input connector assignment and the connections. • The surround mode cannot be set if the input mode is set to "7.1CH IN". • If "HDMI Control" is set to "ON" and a TV compatible with the ARC is connected via the HDMI OUT connectors, the input mode whose input source is "TV" is fixed to ARC. Auto : Detect type of digital input signal and decode and play automatically. PCM : Decode and play only PCM input signals. DTS : Decode and play only DTS input signals. • This item can be set for input sources for which "HDMI" or "Digital" is assigned at "Input Assign" (vpage 68). • Normally set this mode to "Auto". Set "PCM" and "DTS" when inputting the corresponding input signal. Change the display name of the selected input source. Setting items Rename Change the display name of the selected input source. Default The input source name is returned to the default setting. Setting details • Up to eight characters can be input. • For character input, see page 65. Yes : Reset to the defaults. No : Do not reset to the defaults. Source Level Default settings are underlined. • This function corrects the playback level of the selected input source's audio input. • Make this setting if there are differences in the input volume levels between the different sources. -12dB - +12dB (0dB) Setting details The analog input level and digital input level can be adjusted independently for input sources for which "HDMI" or "Digital" is assigned at "Input Assign" (vpage 68). Playback Mode Make settings for repeat playback mode or random playback mode. Setting items Repeat Make settings for repeat mode. Setting details All : All files are played repeatedly. One : A file being played is played repeatedly. OFF : Repeat playback mode is canceled. NET/USB Random Make random mode settings. ON : Enable random playback. OFF : Disable random playback. NET/USB Advanced version Information Remote control operation buttons Move the cursor (Up/Down/Left/Right) Confirm the setting Return to previous menu 71