Marantz MV8300 User Guide
Marantz MV8300 Manual
 |
View all Marantz MV8300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Marantz MV8300 manual content summary:
- Marantz MV8300 | User Guide - Page 1
R Model MV8300 User Guide D-VHS Digital Recorder MTP NTSC - Marantz MV8300 | User Guide - Page 2
Marantz D-VHS video cassette recorder. Before use, please read the safety information and precautions contained in the following pages to ensure safe use of your new VCR problems must be considered and the local operating and maintenance (servicing) instructions in the literature - Marantz MV8300 | User Guide - Page 3
basic rules for its installation, use and servicing. 5. Ventilation Slots and openings in the cabinet to proper grounding of the mast and supporting structure, grounding of the lead-in wire power, or other sources, refer to the operating instructions. 3. Power Lines An outside antenna system should - Marantz MV8300 | User Guide - Page 4
across thresholds or deep-pile carpets. SERVICING 1. Servicing If your product is not operating manual. This section also illustrates the controls and connections on the front and rear panel, the front display panel and the Remote. ● The ੬ mark signals a reference to another page for instructions - Marantz MV8300 | User Guide - Page 5
the instructions that are provided with the cleaning tape. If you still do not get a clear picture after using a cleaning tape: ● The heads may be worn. Contact your nearest JVC dealer. ● During VHS playback, if there is a tracking problem, the picture may appear fuzzy. Adjust the tracking manually - Marantz MV8300 | User Guide - Page 6
68 TV Brand Setting ...68 Cable Box Brand Setting ...69 DBS Receiver Brand Setting ...70 Changing Remote Control Code ...71 TROUBLESHOOTING 72 Error Codes and Messages ...78 Questions and answers ...79 INDEX 80 SPECIAL EFFECT PLAYBACK 31 Special Effect Playback ...31 Locating particular - Marantz MV8300 | User Guide - Page 7
to TV Place the VCR on a stable, horizontal surface. AC Outlet AC Power Cord COMPONENT VIDEO OUT Y PB/CB PR/CR VHF/UHF ANTENNA IN OUT S VIDEO IN IN(L-1) S VIDEO i.LINK IN/OUT DV IN S400 ANTENNA CABLE BOX REMOTE PAUSE/ AV COMPULINK R AUDIO L VIDEO R AUDIO L OUT VIDEO DIGITAL OUT OPTICAL - Marantz MV8300 | User Guide - Page 8
PCM/DOLBY DIGITAL CABLE BOX REMOTE PAUSE/ AV COMPULINK R AUDIO L VIDEO R AUDIO L OUT VIDEO DIGITAL OUT OPTICAL PCM/DOLBY DIGITAL IN(L-2) D THEATER REGION 1 IN(L-2) D THEATER REGION 1 Back of VCR AUDIO OUT ANTENNA OUT Back of VCR AUDIO OUT ANTENNA OUT Audio Cable (supplied) S-Video Cable - Marantz MV8300 | User Guide - Page 9
any buttons on the front panel or on the Remote while Plug & Play is in progress. This VCR sets the clock and tuner channels automatically when AC 13) settings. If, however, you want to add or delete channels, refer to Manual Channel Set on page 14. IN F-1 + During Initial Auto Clock Set "Auto" - Marantz MV8300 | User Guide - Page 10
. If you use a cable box, set the clock manually. (੬ pg. 12) Clock Setting ● Turn on the VCR and the TV, and select the AV mode on the TV. ● Set the VCR/TV/CABLE/DBS selector on the Remote to "VCR". Preparations 1 Access Main Menu screen Press MENU. VCR CABLE TV /DBS 2 Access Clock Set screen - Marantz MV8300 | User Guide - Page 11
press OK. FUNCTION SET UP CLOCK SET TUNER SET UP INITIAL SET UP OTHER GUIDE CHANNEL AUTO CLOCK SET MANUAL CLOCK SET AUTO CLOCK ON You have three choices: AUTO- Select if you want to adjust your VCR's clock automatically by the incoming signal from the host channel. (Auto Daylight Saving Time - Marantz MV8300 | User Guide - Page 12
12 EN VCR CABLE TV /DBS INITIAL SETTINGS (cont.) Setting clock manually - Manual Clock Set First follow steps 1 to 2 on page 10, then go to the following steps. 3 Access Manual Clock Set screen 4 Set time Press @ # until the desired time appears, then press fi. ● Holding @ # changes the time in 30 - Marantz MV8300 | User Guide - Page 13
on the TV. ● Set the VCR/TV/CABLE/DBS selector on the Remote to "VCR". Setting channels automatically - Auto Channel Set Use Auto Channel Set only if channels have not been set correctly by the Plug & Play setting. If you want to add or delete channels, use Manual Channel Set (੬ pg. 14). 1 Access - Marantz MV8300 | User Guide - Page 14
VCR CABLE TV /DBS INITIAL SETTINGS (cont.) 3 Access Manual Channel Set screen Press %fi to move the arrow to "MANUAL CH SET", then press OK. FUNCTION SET UP TUNER SET TUNER SET UP CABLE SET UP INITIAL SET UP DBS SET UP BAND AUTO CH SET MANUAL SET UP INITIAL SET UP MANUAL CH SET MENU 2-4 To skip - Marantz MV8300 | User Guide - Page 15
on the cable box. NOTE: When connecting your cable box, refer to its instruction manual. Controller (supplied) To RF output Transmitter or To Audio/video output 4 Connect Controller to VCR Connect the Controller to the CABLE BOX Controller connector on the rear panel. To ANTENNA IN To - Marantz MV8300 | User Guide - Page 16
VCR/TV/CABLE/DBS selector on the Remote to "VCR". INITIAL SETTINGS (cont.) Setting cable box input channel & brand After installation, set the cable box input channel and its brand correctly; otherwise, the Controller connected to your VCR's AUDIO/VIDEO IN (L-1) or AUDIO/VIDEO IN (L-2) connectors - Marantz MV8300 | User Guide - Page 17
For customers in U.S.A.: If you are unable to set the Controller, contact your Marantz authorized dealer. 7 Return to normal screen Press MENU. If the VCR's clock has not been set (with AUTO CLOCK set to ON) "CABLE BOX USERS SET CLOCK MANUALLY" appears for about 5 seconds when you press OK in step - Marantz MV8300 | User Guide - Page 18
, refer to its instruction manual. 4 Connect Controller to VCR Connect the Controller to the CABLE BOX Controller connector on the rear panel. How to control the DBS receiver This VCR has two separate methods to control your DBS receiver. ● The VCR's wireless Remote can control your DBS receiver - Marantz MV8300 | User Guide - Page 19
VCR/TV/CABLE/DBS selector on the Remote to "VCR". 19 Setting DBS receiver input channel & brand After installation, set the DBS receiver's input channel and its brand correctly; otherwise, the Controller receiver is connected to your VCR's AUDIO/VIDEO IN (L-1) or AUDIO/VIDEO IN (L-2) connectors on - Marantz MV8300 | User Guide - Page 20
also use "Satellite Auto Recording" (੬ pg. 62). ● The VCR can only change the satellite channel through the Controller during timer recording. ● If your DBS receiver cannot be operated with a Remote (because it has no remote sensor), you cannot use the Controller to change its channels. Make sure to - Marantz MV8300 | User Guide - Page 21
"PICTURE CONTROL" is set to "AUTO": (੬ pg. 54), "VIDEO CALIBRATION" appears on the screen, and this VCR checks the tape condition during automatic tracking (only cassettes recorded in the S-VHS, S-VHS ET or VHS mode). To stop playback 2 REW(1) FF(¡) STOP(7) Press STOP ( 7 ) on the Remote or STOP - Marantz MV8300 | User Guide - Page 22
slowly, and a tape will be played back 50 times. To stop playback, press STOP ( 7 ) on the Remote or STOP/EJECT ( 7/0 ) on the front panel. VCR CABLE TV /DBS C NOTE: For a cassette recorded in D-VHS mode, Repeat Playback is not possible if the cassette was recorded in LS3 or LS5 mode. B D - Marantz MV8300 | User Guide - Page 23
Selecting monitor sound - Audio Monitor You can select the desired monitor sound. While playing back a tape on which stereo sound or SAP sound is recorded, press A. MONITOR on the Remote. Each time you press the button, sound changes as follows: S-VHS/VHS Manual tracking adjustment If automatic - Marantz MV8300 | User Guide - Page 24
tape. Press SKIP SEARCH on the Remote once to 4 times during playback. Each Skip Search when you play back a D-VHS tape recorded in LS5 mode. NOTE: It VCR checks the condition of the tape in use during playback and recording, and compensates to provide the highestpossible pictures. ● Picture Control - Marantz MV8300 | User Guide - Page 25
ARROW KEYS THEN PRESS [OK] Some D-Theater tapes or D-VHS tapes may contain the multiple programs, angles, sounds or subtitles. 1 PROG. 2 During normal playback, press TV/VCR CH +/- on the Remote to select the desired program. ● It is control of this VCR. Select the desired program or angle with the - Marantz MV8300 | User Guide - Page 26
and the TV, and select the AV mode on the TV. ● Set the VCR/TV/CABLE/DBS selector on the Remote to "VCR". POWER 1 2 IN F-1 + D-VHS Recording 4 STOP/EJECT (7/0) 1 Load a D-VHS cassette Make sure the record safety tab is intact. If not, cover the hole with adhesive tape before inserting the - Marantz MV8300 | User Guide - Page 27
On the Remote: a- Press TV/VCR CH + VHS (MTP), S-VHS, S-VHS ET and VHS mode recordings are possible with this VCR. ● To record in the D-VHS mode, use a D-VHS cassette. ● To record in the S-VHS/VHS mode, you can use a D-VHS, S-VHS or VHS cassette. To record in S-VHS mode on D-VHS tapes: Press D-VHS - Marantz MV8300 | User Guide - Page 28
28 EN BASIC PLAYBACK AND RECORDING (cont.) Basic Recording Features ● Turn on the VCR and the TV, and select the AV mode on the TV. ● Set the VCR/TV/CABLE/DBS selector on the Remote to "VCR". A Changing display information Press DISPLAY during recording or recording pause. Each time you press - Marantz MV8300 | User Guide - Page 29
TV screen During recording or recording pause, press OSD on the Remote. All indications corresponding to the current VCR status are displayed for 5 seconds. The time counter remains on the screen indicating the elapsed time. D-VHS INDEX -9 E B LR D-VHS STD 12:00 AM HD CH 123 SAP STEREO D 2 ● The - Marantz MV8300 | User Guide - Page 30
/VHS only) (੬ pg. 54) When this function is set to "ON", this VCR checks the condition of the tape in use during playback and recording, and compensates to provide the highestpossible pictures. ● Second Audio Recording (੬ pg. 55) This VCR's built-in MTS decoder enables reception of Multichannel TV - Marantz MV8300 | User Guide - Page 31
Turn on the VCR and the TV, and select the AV mode on the TV. ● Set the VCR/TV/CABLE/DBS selector on the Remote to "VCR". With this VCR, you can , 60 times in LS5 mode. The high-speed picture search speed of the S-VHS/VHS recording is 11 times normal playback speed in SP mode, 31 times in EP mode - Marantz MV8300 | User Guide - Page 32
During still picture playback, simply press CHANNEL + or - on the VCR (or TV/VCR CH + or - on the Remote) to adjust tracking. PLAY (3) C B C -1,-2 Viewing still picture frame by frame - Frame-by-Frame Playback (S-VHS/VHS only) 1 2 Pause during playback Press PAUSE ( 8 ). Playback is freezed and - Marantz MV8300 | User Guide - Page 33
Viewing slow motion picture - Slow Motion Playback (S-VHS/VHS only) TV/VCR CH +/- During normal playback: Press 4 to 4 NOTE: Manual tracking is possible during slow motion playback. During slow motion playback, simply press CHANNEL + or - on the VCR (or TV/VCR CH + or - on the Remote) to adjust - Marantz MV8300 | User Guide - Page 34
VCR Plus+® Timer Programing ● Turn on the VCR and the TV, and select the AV mode on the TV. ● Set the VCR/TV/CABLE/DBS selector on the Remote to "VCR". SET EXPRESS PROGRAMMING 34 BACK Then; If the Guide Channel Set screen appears - go to step 4. If the VCR Plus+ Program screen appears - go to step - Marantz MV8300 | User Guide - Page 35
when you input the PlusCode number of a station for which the guide channel number has not been set previously. ● If you receive your channels with a cable box and if you have properly set your Controller, "CABLE CH" appears in place of "VCR CH". If not, refer to pages 15 - 17. In that case - Marantz MV8300 | User Guide - Page 36
the VCR/TV/CABLE/DBS selector on the Remote to "VCR". To ensure that VCR Plus+ timer recording operates correctly, it is necessary to set the VCR Plus+ "Guide Channel Set" for each station. Read the following information carefully. VCR CABLE TV /DBS VCR Plus+ guide channel matching The VCR Plus - Marantz MV8300 | User Guide - Page 37
SET UP INITIAL SET UP OTHER GUIDE CHANNEL 5 Return to normal screen Press MENU. ● If you receive your VCR CH -- channels with a cable box and if OK SELECT WITH ARROW KEYS you have properly SELECT THEN PRESS [OK] EXIT set your Controller, "CABLE CH" appears in place of "VCR CH". If not, refer to - Marantz MV8300 | User Guide - Page 38
set before you can program the timer (੬ pg. 10). Express Timer Programing ● Turn on the VCR and the TV, and select the AV mode on the TV. ● Set the VCR/TV/CABLE/DBS selector on the Remote to "VCR". 1 Load a cassette Make sure the record safety tab is intact. If not, cover the hole - Marantz MV8300 | User Guide - Page 39
must have the next day's date. ● After timer recording is completed, the VCR turns off automatically. ● You can program the timer recording while a regular SPEED STD (SP) CANCEL SOURCE DBS CONFIRM PROG. To use the VCR while it is in timer recording standby mode Press TIMER (‰) to cancel the - Marantz MV8300 | User Guide - Page 40
TV, and select the AV mode on the TV. ● Set the VCR/TV/CABLE/DBS selector on the Remote to "VCR". TIMER RECORDING (cont.) B 1 2 Canceling or changing program settings Access Program screen Repeat steps 1 to 3 in the left column. A -1 VCR CABLE TV /DBS Cancel or change program setting To cancel - Marantz MV8300 | User Guide - Page 41
to engage or disengage the timer recording standby mode. ● Auto SP = EP Timer (S-VHS/VHS only) (੬ pg. 57) If there is not enough tape to record the entire broadcast for recording in SP mode, the VCR automatically switches to EP mode to allow complete recording. This feature is especially handy when - Marantz MV8300 | User Guide - Page 42
, and select the AV mode on the TV. ● Set the VCR/TV/CABLE/DBS selector on the Remote to "VCR". 1 Load a cassette Insert a tape recorded on this VCR. ● The VCR turns on automatically. ● The tape will run for a few seconds while the VCR searches for the tape number recorded. If tape number is found - Marantz MV8300 | User Guide - Page 43
THEN PRESS [OK] 4 Return to normal screen Press NAVI. Blank part* * "BLANK" appears for non-recorded part, the part whose information has been deleted manually (੬ pg. 52), or the part where new program has been recorded. NOTE: If you press NAVI when a cassette is not loaded, "NO TAPE!" appears - Marantz MV8300 | User Guide - Page 44
the TV, and select the AV mode on the TV. ● Set the VCR/TV/CABLE/DBS selector on the Remote to "VCR". A 1 2 Finding by tape number Access Video Navigation screen Press NAVI. Use the Remote to do the following operations. VCR CABLE TV /DBS Access Library screen Press %fi @ # to move the arrow to - Marantz MV8300 | User Guide - Page 45
press OK. Navigation SEARCH TAPE NUMBER LIBRARY TITLE BLANK CATEGORY NAVI. SET UP DATE C 1 2 Finding by category Use the Remote to do the following operations. Use the Remote to do the following operations. To find a program by category, be sure to select program category in advance (੬ pg. 50 - Marantz MV8300 | User Guide - Page 46
46 EN D VCR CABLE TV /DBS VIDEO NAVIGATION (cont.) Finding by recording date Follow by the recording date. Navigation SEARCH TAPE NUMBER LIBRARY TITLE BLANK CATEGORY NAVI. SET UP DATE Use the Remote to do the following operations. 1 2 EXIT NAVI OK SELECT SELECT WITH ARROW KEYS THEN PRESS [OK] - Marantz MV8300 | User Guide - Page 47
remaining time is enough for a program you want to record. Use the Remote to do the following operations. LIBRARY 10:00 LS5 BLANK 0003 10:00 BLANK Press @ # to move the arrow to "STOP", then press OK. ● The VCR will start search for the beginning of the blank part, then stop. Navigation SEARCH - Marantz MV8300 | User Guide - Page 48
Video Navigation function to create your own video tape library. Editing Titles ● Turn on the VCR and the TV, and select the AV mode on the TV. ● Set the VCR/TV/CABLE/DBS selector on the Remote to "VCR". A VCR CABLE TV /DBS Editing tape title When you want to edit the tape title, follow - Marantz MV8300 | User Guide - Page 49
NUMBER LIST 0017* SOCCER 0017* 0017* 1. JAPAN VS KOREA 2. ENGLAND VS BRAZIL How to enter the characters and symbols with the number keys on the Remote LIBRARY BLANK NAVI. SET UP 1/3 Press the Number keys, then press > to enter each character. Refer to the example below. (Ex.) Enter "JVC NEWS - Marantz MV8300 | User Guide - Page 50
When you want to edit the program title, follow the procedure below by using the Remote. When you want to change the program category, follow the procedure below by using the Remote. 1 2 3 Load a cassette Insert a tape on which there is a program you want to edit. 1 2 3 Navigation SEARCH - Marantz MV8300 | User Guide - Page 51
EN 51 D VCR CABLE TV /DBS Deleting tape information When you want to delete the entire tape information (information for all recorded programs on the tape), follow the procedure below by using the Remote. • Tape information for the Video Navigation function is deleted, but the recorded programs - Marantz MV8300 | User Guide - Page 52
for each recorded program, follow the procedure below by using the Remote. • Program information for the Video Navigation function is deleted, but is full, you have to delete unwanted information to store more information in the VCR's memory. ● " " is displayed beside the tape number of the loaded - Marantz MV8300 | User Guide - Page 53
/TV/CABLE/DBS selector on the Remote to "VCR". You can use the other useful function settings on the Function Set Up screens by following the procedure described below. The table below shows the structure of the menu system. FUNCTION SET UP VIDEO FUNCTION (੬ pg. 54) AUDIO FUNCTION (੬ pg. 55) IN/OUT - Marantz MV8300 | User Guide - Page 54
rental tapes or tapes recorded on other VCRs, set this function either "ON" or "OFF" whichever gives you the best picture. Ⅵ PICTURE CONTROL (S-VHS/VHS only) AUTO (NORM) EDIT SOFT SHARP vibrations may occur. Press CHANNEL + or - on the VCR (or TV/VCR CH + or - on the Remote) to eliminate vibration. - Marantz MV8300 | User Guide - Page 55
signals in other new formats. This VCR COMPONENT VIDEO OUT Y PB/CB PR/CR VHF/UHF ANTENNA IN OUT S VIDEO IN IN(L-1) S VIDEO i.LINK IN/OUT DV IN S400 ANTENNA CABLE BOX REMOTE PAUSE/ AV COMPULINK R AUDIO L VIDEO R AUDIO L OUT VIDEO DIGITAL OUT OPTICAL PCM/DOLBY DIGITAL IN(L-2) D THEATER - Marantz MV8300 | User Guide - Page 56
mode when receiving signals via i.LINK connector or playing back a D-VHS tape containing a recording of an HD (High Definition) signal: 720to1080 correct terminal; otherwise, you may fail in recording (editing) on this VCR. You have to select which terminal - either VIDEO (composite) or S - Marantz MV8300 | User Guide - Page 57
SP = EP TIMER (S-VHS/VHS only) ON OFF * The default setting is bold in the table below. When this function is set to "ON", the VCR automatically switches to EP mode of a digital tuner, refer to the instruction manual of the digital tuner. Ⅵ POWER SAVE ON OFF NOTE: It takes some time until - Marantz MV8300 | User Guide - Page 58
to set the remote control code to "A" when you use this function. (੬ pg. 71). ● Connection varies depending on the type of JVC TV you have. Refer to the TV's instruction manual when making this connection. AV COMPU LINK Television CABLE BOX REMOTE PAUSE/ AV COMPULINK This VCR COMPONENT VIDEO OUT - Marantz MV8300 | User Guide - Page 59
play back S-VHS ET recordings on most of S-VHS VCRs and of VHS VCR equipped with SQPB (S-VHS QUASI PLAYBACK) function. (Notice some VCRs are not ) twice for the ITR (੬ pg. 28) ● when you set the remote control code (੬ pg. 71) ● when you press DISPLAY, the current status appears for a few seconds. - Marantz MV8300 | User Guide - Page 60
VCR/TV/CABLE/DBS selector on the Remote to "VCR". i.LINK set up for connected device When you connect i.LINK compatible devices to this VCR UP INITIAL SET UP OTHER GUIDE CHANNEL JLIP ID LINC RESET work, press D-VHS and STOP/EJECT control one of the i.LINK-compatible devices connected to this VCR - Marantz MV8300 | User Guide - Page 61
signals, digital audio signals, and device control signals bi-directionally instruction manual for the connected device. Furthermore, data is not passed along by this VCR when "POWER SAVE" is set to "ON" on this VCR (੬ pg. 57) and the VCR is turned off. ● The maximum data transfer speed supported - Marantz MV8300 | User Guide - Page 62
VCR/TV/CABLE/DBS selector on the Remote to "VCR". This function allows you to automatically record a satellite program which is timer-programed on your DBS receiver. Preparation: Connect a DBS receiver to the AUDIO For timer programing method, refer to the manual supplied with the DBS receiver. 2 - Marantz MV8300 | User Guide - Page 63
VCR/TV/CABLE/DBS selector on the Remote to "VCR". The JLIP (Joint Level Interface Protocol) terminal is used to connect the VCR to a personal computer or similar device. By connecting through the JLIP terminals, you can control the VCR VCR, follow the procedure below. VCR OTHER GUIDE CHANNEL - Marantz MV8300 | User Guide - Page 64
CB PR/CR This VCR (for recording) COMPONENT VIDEO OUT Y PB/CB PR/CR VHF/UHF ANTENNA VHF/UHF ANTENNA IN IN OUT S VIDEO IN IN(L-1) S VIDEO i.LINK IN/OUT DV IN S400 ANTENNA OUT S VIDEO IN IN(L-1) S VIDEO CABLE BOX REMOTE PAUSE/ AV COMPULINK R AUDIO L VIDEO R AUDIO L OUT VIDEO DIGITAL OUT - Marantz MV8300 | User Guide - Page 65
noise on this VCR may differ from the noise on the connected devices. It is caused by the difference of the data processing method. ● Connection with certain product(s) may not be supported. (੬ "ATTENTION" on the back cover.) On the front panel: Press REC ( ¶ ). On the Remote: Press REC ( ¶ ) and - Marantz MV8300 | User Guide - Page 66
Connection with the camcorder A Connect an audio/S-video cable between the camcorder's audio/S-video output connectors and your VCR's audio/S-video input connectors. ● When the JVC camcorder is equipped with the Master Edit Control, you can control the VCR from the camcorder. Connect the mini-plug - Marantz MV8300 | User Guide - Page 67
) at the same time. On the front panel: Press CHANNEL +/-. On the Remote: Press the Number key "0 (AUX)" or TV/VCR CH +/-. To use a Master Edit Control-equipped JVC camcorder NOTES: ● When using this VCR as the recording VCR, set the video input terminal setting correctly (੬ pg. 56). ● When using - Marantz MV8300 | User Guide - Page 68
with a manufacturer 's (brand's) code, this Remote can perform some of the remote control functions of the listed TVs. TV Brand Setting 2 VCR CABLE TV /DBS 1 Turn on the TV 3 - 1,3 4 TV/VCR Turn on the TV using the Power button on the TV or its Remote. 2 Set remote operation mode 3 Set TV brand - Marantz MV8300 | User Guide - Page 69
EN 69 Cable Box Brand Setting 2 VCR CABLE TV /DBS When programed (set) with a manufacturer 's (brand's) code, this Remote can perform some of the remote control functions of the listed cable boxes. If your cable box does not function with a specified code, try other codes. 1 Turn on the cable - Marantz MV8300 | User Guide - Page 70
(cont.) When programed (set) with a manufacturer 's (brand's) code, this Remote can perform some of the remote control functions of the listed DBS (Direct Broadcast Satellite) receivers. DBS Receiver Brand Setting 2 VCR CABLE TV /DBS 1 Turn on the DBS receiver Turn on the DBS receiver using - Marantz MV8300 | User Guide - Page 71
, make sure that the VCR is turned on by pressing POWER on the Remote. To control four VCRs with the same Remote 2-3 You can control four JVC VCRs by switching the remote control code for the Remote between A, B, C and D (੬ step 2), keeping four VCRs to different control codes. ● Press the Number - Marantz MV8300 | User Guide - Page 72
2. The clock works, but the VCR's power will not come on. TROUBLESHOOTING Before requesting service, use this chart and see if you can repair the trouble yourself. Small problems are often easily corrected, and this can save you the trouble of sending your VCR off for repair. POSSIBLE CAUSE ● The - Marantz MV8300 | User Guide - Page 73
perform the set-up procedures. Make sure you have compensated for guide channel and VCR or cable box channel number mismatches (੬ pg. 36). Timer and set again if necessary, then press TIMER (‰) again. Connect the Controller correctly (੬ pg. 15). After confirming your cable box's input channel number - Marantz MV8300 | User Guide - Page 74
not automatically switched during timer recording. TROUBLESHOOTING (cont.) POSSIBLE CAUSE ● The Controller is not properly connected to the VCR. ● The input channel selected on the DBS Receiver Set screen is incorrect. ● The VCR is not set correctly to control the DBS receiver. ● The DBS receiver - Marantz MV8300 | User Guide - Page 75
tape up to its end, eject it, and try it again. It is impossible to search the desired program which is not recorded on this VCR using Video Navigation. Check the remaining memory (੬ pg. 52). If it is full, delete unnecessary Video Navigation information (੬ pg. 51, 52). Check the remaining memory - Marantz MV8300 | User Guide - Page 76
(੬ pg. 11), or perform Manual Clock Set (੬ pg. 12). Unplug the AC power plug once, then plug it again. Set it to off. 3. The Remote will not operate your TV or sure to contact your Marantz authorized dealer if such troubles occur. ATTENTION ● This VCR contains microcomputers. External electronic - Marantz MV8300 | User Guide - Page 77
problems. Playback of tapes recorded in D-VHS images on D-VHS tapes • The to this VCR with VHS cassette in the VCR and turn off and on the VCR, then start recording again. If the problem is not fixed, record using the audio VCR, the block noise may appear. • When you record audio VCR, the sensing - Marantz MV8300 | User Guide - Page 78
TROUBLESHOOTING (cont.) Some error codes and messages may appear on the TV screen when operating the VCR. Refer to the chart below for the solution. DESCRIPTION ● An attempt was made to make a D-VHS NOT PLAY BACK THIS TAPE CAN NOT DECODE VIDEO OR AUDIO USE SET TOP BOX OR HDTV TUNER TOO MANY i.LINK - Marantz MV8300 | User Guide - Page 79
...Q. What happens if the tape reaches its end during recording? A. The VCR stops, then " " and "#" blink on the front display panel. TIMER RECORDING Q. " " and "‰" remain lit on the front display panel. Is there a problem? A. No. This is a normal condition for a timer recording in progress...Q. Can - Marantz MV8300 | User Guide - Page 80
audio and video content. A variety of other data can be sent as well. As the means to record all of these digital signals while supporting playback of the extensive VHS library of analog tapes, D-VHS was developed. This VCR signals, digital audio signals, and device control signals bi-directionally - Marantz MV8300 | User Guide - Page 81
to TV 7 Component Video Connection 8 S-VIDEO connection 8 Contents 6 Counter reset 22, 85 J JLIP ID Number Setting 63 M Manual tracking 23 Multi-Brand Remote Controlling four JVC VCRs 71 Setting Cable Box brand 69 Setting DBS receiver brand 70 Setting TV brand 68 T Tape position indicator 22 Tape - Marantz MV8300 | User Guide - Page 82
-R - CHANNEL + STOP/ EJECT REC PAUSE PLAY REW FF D-VHS + 9 0 !@#$ 1 S-VIDEO/VIDEO/AUDIO input connectors (F-1) : ੬ pg. 66 2 POWER button : ੬ pg. 21, 27 3 TIMER ‰ button : ੬ pg. 35, 39, 40 4 Cassette loading slot 5 Remote sensor 6 STOP/EJECT ( 7/0 ) button : ੬ pg. 21, 27 7 Front display panel - Marantz MV8300 | User Guide - Page 83
with the i.Link standard. 7 CABLE BOX Controller connector : ੬ pg. 15, 18 8 REMOTE PAUSE/AV COMPULINK terminal ● REMOTE PAUSE terminal : ੬ pg. 67 ● AV COMPULINK terminal : ੬ pg. 58 9 S VIDEO/AUDIO/VIDEO OUT connectors : ੬ pg. 7, 8, 66 0 S VIDEO/AUDIO/VIDEO IN connectors (L-2): ੬ pg. 66 ! S VIDEO - Marantz MV8300 | User Guide - Page 84
time : ੬ pg. 28 2 Timer mode indicator : ੬ pg. 35, 39 3 Record mode indicator : ੬ pg. 26 - 28 4 Play mode indicator : ੬ pg. 21, 22 5 D-Theater indicator : ੬ pg. 25 6 D-VHS indicator : ੬ pg. 26, 27 7 S-VHS indicator : ੬ pg. 58, 59 - Marantz MV8300 | User Guide - Page 85
EN 85 On-screen display D-VHS INDEX -9 B D-VHS E MARANTZ LR MV8300 D-VHS STD 12:59 AM HD CH 123 SAP OFF CC1 CC2 CC3 CC4 1 Cassette indication 2 Cassette type indication : ੬ pg. 26 3 Index no. indication : ੬ pg. 24 4 VCR operation mode indication 5 Audio monitor indications : ੬ pg. 23 6 Clock - Marantz MV8300 | User Guide - Page 86
button : ੬ pg. 24 O A. (Audio) MONITOR button : ੬ pg. 23 ( Remote can operate most of your VCR's functions, as well as basic functions of TV sets, cable boxes and DBS receivers. ● Point the Remote toward the remote sensor on the target component. ● The maximum operating distance of the remote control - Marantz MV8300 | User Guide - Page 87
OUT (Y, PB/CB, PR/CR) x 1 Digital OUT (optical) x 1 : Infrared remote control unit, "AA" battery x 2, Audio cable, RF cable (F-type), S-video cable (4-pin), Controller Weight Maximum recording time D-VHS (HS) : 210 min. with DF-420 video cassette D-VHS (STD) : 420 min. with DF-420 video cassette - Marantz MV8300 | User Guide - Page 88
.com You can find your nearest authorized distributor or dealer on our website. JAPAN U.S.A. EUROPE Marantz Japan, Inc. Marantz America, Inc. Marantz Europe B.V. 35-1 Sagami Ohno 7-Chome, Sagamihara-shi, Kanagawa 228-8505, Japan 1100 Maplewood Drive, Itasca, IL 60143, U.S.A. P.O. Box 8744, 5605
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
 |
 |
Model MV8300 User Guide
D-VHS Digital Recorder
R
MTP
NTSC