Marantz PM7001 PM7001 Spec Sheet

Marantz PM7001 Manual

Marantz PM7001 manual content summary:

  • Marantz PM7001 | PM7001 Spec Sheet - Page 1
    Aluminum Remote Control Device Remote RC4001PM Power Requirement AC 120V 60Hz Power Consumption 250W Dimensions (Inches) W x H x D 175/16" x 5" x 143/8" Weight (lbs.) 23.1 *All specifications, dimensions and weights are subject to change without notice. D&M Holdings, Marantz, Marantz
  • 1

PM7001
INTEGRATED AMPLIFIER
*All specifications, dimensions and weights are subject to change without notice. D&M Holdings, Marantz, Marantz America, Inc. or any of its subsidiaries will not assume any liability for errors in this spec
sheet which may result in consequential errors being made by retail dealers, designers, custom installers, cabinet makers or end users, etc based upon information contained within this document.
©2006 Marantz America, Inc. • Marantz America, Inc. • 1100 Maplewood Drive
• Itasca, IL 60143
Phone 630-741-0300
www.marantz.com
GENERAL
Color
Front panel
Remote Control
Power Requirement
Power Consumption
Dimensions (Inches) W x H x D
Weight (lbs.)
Black
Aluminum
Device Remote RC4001PM
AC 120V 60Hz
250W
17
5
/
16
" x 5" x 14
3
/
8
"
23.1
SPECIFICATIONS
THD (20Hz - 20kHz, 8Ω)
Input Sensitivity/Impedance
Frequency Response
S/N Ratio
0.02%
200mV/20k
5Hz - 100kHz (+/- 3 dB)
88dB
(CD, Line)
FEATURES
Number of Channels
Output Power/Channel
(20Hz - 20kHz) @ 8
HDAM
Power Transformer
Discrete Amplifier Stage
Individual Level Adjust
Tone Control
Phono Input
Source Direct
Speaker A/B
2
70W
(HDAM SA)
EI
-
(MM)
0/6
-
1/2 (Pre Out/Rec Out)
1/1
-
- / -
IN/OUTPUTS
AUDIO
Analog L&R In (Balanced/Unbalanced)
Main Channel Amp In
Bridge Mono Mode
Analog L&R Out
Headphone Out
OTHER
D-Bus Remote (RC-5) In/Out
External Control (RS232C)
AC Outlets (Switched/Unswitched)
The PM7001 stereo integrated amplifier is the perfect solution for the audiophile seeking uncompromising musicality with flexible
operation. Delivering 2 x 70 Watts (RMS into 8 ohms), this superb Current Feedback amplifier features symmetrical circuits for
perfect image balancing, and uses hand selected components and Marantz' proprietary HDAM-SA2 circuits to preserve the signal's
dynamic structure, tonal quality and soundstage. The 2-stage construction concept, the short, symmetrical signal path and the high
current power supply further underline the superb build quality of the PM7001. The moving magnet phono input completes the list
and makes the PM7001 the perfect center piece of your stereo system.
• 70Watt/Ch Into 8 ohm /100 Watts/Ch Into
4 ohm
• High Speed Instantaneous Current Supply
Power Amp Design
• New Power Stage Construction
• Current Feedback Topology Volume Amp
and Power Amp
• On-Board HDAM
®
SA Technology
• High S/N ratio and Channel
Separation Input Buffer Circuit
• Active Filter Type Tone Control
• Pre-Out/ Main-In Terminals
• MM (Moving Magnet) Phono Equalizer
• Record Output Selector
• Source Direct Mode
• Selectable Speaker System 1/2
Terminals
• D-BUS (RC-5 In/Out) Remote
Connection
• Device Remote