Marantz SC-7S1 SC-7S1 User Manual
Marantz SC-7S1 Manual
 |
View all Marantz SC-7S1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Marantz SC-7S1 manual content summary:
- Marantz SC-7S1 | SC-7S1 User Manual - Page 1
Model SC-7S1 User Guide Stereo Control Amplifier - Marantz SC-7S1 | SC-7S1 User Manual - Page 2
REMOVE THE COVER (OR BACK) NO USER-SERVICEABLE PARTS ARE INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING TO REDUCE - Marantz SC-7S1 | SC-7S1 User Manual - Page 3
or other sources, refer to the operating instructions. 12. Do Instruction Manual for replacement or resetting of the protective device. If replacement of the plug is required, be sure the service mast and supporting structure, grounding or other products (including amplifiers) that produce heat. AC - Marantz SC-7S1 | SC-7S1 User Manual - Page 4
Table of Contents 1. Instruction for use ...2 Foreword ...2 Equipment mains setting ...2 Amp connection 8 Complete Bi-Amp connection ...9 Installing the SACD multi-channel audio speakers ...10 Connection 4 5.1ch multi 9 9. Block diagram ...19 10. Trouble shooting ...20 11. Maintenance ...20 1 - Marantz SC-7S1 | SC-7S1 User Manual - Page 5
enter the equipment, contact your nearest dealer or service center. Do not pull out the plug SC7S1/N1G) (Model SC7S1/U1G) q Remote Control RC-7S1SC TRIM MODE EXIT ATT A TRIM B BALANCED SACD/CD LINE 1 TAPE LINE 2 VOLUME RC-7S1SC q AAA (R03) Batteries q Remote Cable q Instruction Manual - Marantz SC-7S1 | SC-7S1 User Manual - Page 6
for Super Audio CD. q HDAM SA The feedback impedance of the Current Feedback circuit was reduced to its minimum to make it faster. We developed a new High Definition Amplifier Modules (HDAM), a separeted module operating as a buffer for the amplifier. The SC-7S1 has four HDAM SAs on each inputoutput - Marantz SC-7S1 | SC-7S1 User Manual - Page 7
0 -6 -9 BALANCED PUSH -12 INPUT UNBALANCED 1 2 1 SPEAKERS 2 MA-9S1 For R ch This connection can have options i.e. You may connect the units using either balanced or unbalanced cables to connect your SACD/CD and control Amp, as well as the SC-7S1 with MA-9S1s. But you can not inter match. 4 - Marantz SC-7S1 | SC-7S1 User Manual - Page 8
by Marantz for SC-7S1 with Marantz MA-9S1. If using the MA-9S1s, Please read the instruction manual for the MA-9S1. Name and Function → P13 Standard set-up in using Marantz Monaural Power Amp MA-9S1. Please refer to this connection in the event of using other Power Amps also. q SC-7S1 doesn - Marantz SC-7S1 | SC-7S1 User Manual - Page 9
are designed for Bi-Amp capabilities) SACD Player / CD Player RIGHT ANALOG LEFT OUTPUTS UNBALANCED BALANCED 1 1 CD Recorder / Tape Deck POWER 4 3 2 1 0 5 6 7 8 9 10 L R INPUT OUTPUT ANALOG or SC-7S1 BALANCED PUSH A CH BIAMP INPUT SACD/CD 1 LINE 2 PUSH B CH TAPE REC OUT - Marantz SC-7S1 | SC-7S1 User Manual - Page 10
units using either balanced or unbalanced cables to connect your SACD/CD and control Amp. But you can not inter match. Bass speaker and Mid/High speakers with separate power Amplifiers. Bi-Amping will lessen the burden of Power Amp 7S1 is set to stereo, then the unbalanced connections must be used. 7 - Marantz SC-7S1 | SC-7S1 User Manual - Page 11
BI-AMP ID NO. 12 3 or 4 5 6 Setting 2 BALANCED PUSH A CH BIAMP INPUT SACD/CD 1 LINE 2 PUSH B CH TAPE REC OUT PRE OUT UNBALANCED 1 2 BALANCED REMOTE CONTROL IN ID NO. 12 3 4 5 6 OUT MODE STEREO BI-AMP SC-7S1 For L ch Bch can't be used. MODE STEREO BI-AMP Setting BI-AMP - Marantz SC-7S1 | SC-7S1 User Manual - Page 12
or unbalanced cables to connect your SACD/CD and control Amp. But you can SC7S1, this is a wiring which separates Mid/High signal and Low signal from the Pre-Amp section. In this event, the SC-7S1 is used as Monaural Pre-Amps. And separate Left/Right channels from the output terminal of CD player - Marantz SC-7S1 | SC-7S1 User Manual - Page 13
systems are laid out as per the ITU-R BS.7751 recommendation. • On SACD multi-channel discs, the music signals are basically recorded using 5 channels (or manual of your sub-woofer.) Sub-woofer Front speaker (Left) Center speaker 60° Front speaker (Right) approx. 110° approx. 110° Reference - Marantz SC-7S1 | SC-7S1 User Manual - Page 14
-7S1 Stereo Control Amplifiers. The system can be enhanced to q q Caution q If you use an Active (powered) sub-woofer for LFE, please refer to the User's manual of the Active sub-woofer for set-up instructions - Marantz SC-7S1 | SC-7S1 User Manual - Page 15
the indicator of the Input Selector will illuminate for the source selected. The SC-7S1 will be ready in approximately 8 seconds. ባ Remote control sensor This You can decrease the volume by 20dB, 40dB & 60dB. Please refer to page 16 for further information regarding Attenuation functions. ቨ Display - Marantz SC-7S1 | SC-7S1 User Manual - Page 16
i.e. SACD, CD Player. When Bi-Amping, terminal B can not be used. Balanced terminal → p5 2 Input SACD/CD, Amplifier. When Bi-Amping, the signal being input to channel A, will be output to both A & B channels. 6 Remote control In/Out terminals These terminals are for connecting one or more SC-7S1s - Marantz SC-7S1 | SC-7S1 User Manual - Page 17
the infrared signal reception window (remote sensor) on the front of the SC-7S1. Remote control operation may not be possible if the remote control unit's unit cannot be operated if the space between the controller and the player's remote sensor is obstructed. Do not place any objects on top - Marantz SC-7S1 | SC-7S1 User Manual - Page 18
such as CD Players. ቦ Adjust the volume by the buttons v/w of SC-7S1 or the Remote control. ቧ If the display button is pressed, the volume indicator will be turned off. s How to record BALANCED SACD / CD LINE 1 LINE 2 TAPE input selector input selector stereo control amplifier sc-7s1 stereo - Marantz SC-7S1 | SC-7S1 User Manual - Page 19
7. How to operate function and how to set up s Attenuate function With one touch, the volume can be decreased, instantly. The ATT button on the SC-7S1 or the Remote Control, is used for this function. Unit Remote Controller E EXIT ATT or TRIM B The volume will be indicated in the display - Marantz SC-7S1 | SC-7S1 User Manual - Page 20
adjustment level will be decreased by 0.5 dB step, and the output level on the A ch will be decreased. A TRIM stereo control amplifier sc-7s1 BALANCED SACD/CD input selector A SYNC B power Light Red Flash Green ቤ Once the Trim-B button v or w on Remote control is pressed, Indicator on the - Marantz SC-7S1 | SC-7S1 User Manual - Page 21
ID No. switch for the main unit of the SC7S1 to control others, which is called unit. The ID No. set up will be indicated in the display window for 3 seconds when the unit is powered on. stereo control amplifier sc-7s1 ቦ Please refer to p.17 for Trim adjustment . If the whole system - Marantz SC-7S1 | SC-7S1 User Manual - Page 22
range 6dB (0.5dB STEP) Attenuator setting level 20, -40, -60, -∞dB Supply voltage (SC7S1/N1G AC 230 V 50Hz (SC7S1/U1G AC 120 V 60Hz Power consumption (SC7S1/N1G 22W (0.1 A) (SC7S1/U1G 22W (0.2 A) Dimensions W 459mm H 136mm D 441mm Weight 21kg * All specifications, dimensions and weights - Marantz SC-7S1 | SC-7S1 User Manual - Page 23
the unit and player or power amplifier? 5. Is the power amplifier or input source wrongly shut OFF power to the power amplifier, then shut OFF power to all SC-7S1s and check the ID No. refer to your dealer or write directly to the nearest location to you that is listed on the Marantz Authorized Service - Marantz SC-7S1 | SC-7S1 User Manual - Page 24
place to be referred to as necessary for insurance purposes or when corresponding with Marantz. IMPORTANT When seeking warranty service, it is the of used batteries, please comply with governmental regulations or environmental public instruction's rules that apply in your country or area. - Do not - Marantz SC-7S1 | SC-7S1 User Manual - Page 25
www.marantz.com You can find your nearest authorized distributor or dealer on our website. U.S.A. Marantz America, Inc. 1100 Maplewood Drive, Itasca, IL 60143, U.S.A. is a registered trademark.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
 |
 |
Model SC-7S1 User Guide
Stereo Control Amplifier