Marantz SR6005 SR6005 User Manual - English
Marantz SR6005 Manual
 |
View all Marantz SR6005 manuals
Add to My Manuals
Save this manual to your list of manuals |
Marantz SR6005 manual content summary:
- Marantz SR6005 | SR6005 User Manual - English - Page 1
ESPAÑOL FRANÇAIS ENGLISH AV Surround Receiver SR6005 - Marantz SR6005 | SR6005 User Manual - English - Page 2
- Marantz SR6005 | SR6005 User Manual - English - Page 3
any interference received, including interference that may cause undesired operation. 2. IMPORTANT NOTICE: DO NOT MODIFY THIS PRODUCT This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modification not expressly approved by Marantz may - Marantz SR6005 | SR6005 User Manual - English - Page 4
should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths or curtains. • Naked flame sources such as lighted candles should not be placed on the unit. • Observe and follow local regulations regarding battery disposal. • Do not expose the unit to - Marantz SR6005 | SR6005 User Manual - English - Page 5
for purchasing this Marantz product. To ensure proper operation, please read this user guide carefully before using Setup 50 Audio/Video Adjust 56 Manual Setup 61 Information 68 Other settings 68 Remote control settings 68 Operating the connected devices by remote control unit 69 Operating AV - Marantz SR6005 | SR6005 User Manual - English - Page 6
Check that the following parts are supplied with the product. q User guide 1 w Warranty card (for USA 1 e Warranty card (for CANADA 1 r Power cord 1 t Remote control unit (RC011SR 1 y R03/AAA batteries 2 u Setup microphone (ACM1H 1 i AM loop antenna (for HD Radio broadcasts 1 o FM indoor - Marantz SR6005 | SR6005 User Manual - English - Page 7
problems with the connection cables. • Power is supplied to some of the circuitry even when the unit is set to the standby mode. When going on vacation or leaving home About Care • Wipe the cabinet and control panel clean with a soft cloth. • Follow the instructions when using a chemical cleaner. • - Marantz SR6005 | SR6005 User Manual - English - Page 8
setup guide) Here, we explain the entire setup procedure, from unboxing the unit to using it in a home theater. user manuals for each device. 1 2 3 4 5 Install Connect Turn on Set up Play back (vpage 5) (vpage 5) power speakers disc (vpage 7) (vpage 7) (vpage 12) Enjoy better audio - Marantz SR6005 | SR6005 User Manual - English - Page 9
Setup function of this unit to automatically detect the number of connected speakers and perform optimal settings for the speakers to be used. FL SW FR C 90 - 110˚ 22 - 30˚ 135 - 150˚ Speakers Carefully check the left (L) and right (R) channels and + (red) and - (black / AMP ASSIGN - Marantz SR6005 | SR6005 User Manual - English - Page 10
Subwoofer with built-in amplifier Speaker cables (sold separately) SL SR SBL SBR HDMI OUT HDMI cable (sold separately) HDMI IN HDMI cable (sold separately) To , and setup methods for the 7.1-channel system with surround back speakers. For the installing, connecting, and setup methods of - Marantz SR6005 | SR6005 User Manual - English - Page 11
set up the speakers manually, use "Speaker Setup" (vpage 61) on the menu. NOTE • Make the room as quiet as possible. Background noise can disrupt the room measurements. Close windows, silence cell phones, televisions, radios, air conditioners, fluorescent lights, home appliances, light remote control - Marantz SR6005 | SR6005 User Manual - English - Page 12
to 75 dB using the test tone (vpage 63) before Audyssey Auto Setup. 3 Set up the remote control unit nn Set up the operation mode Press AMP to set the remote control unit to amplifier operation mode. Press AMP 8 The "Simple version" section provides the speaker installation, connection, and - Marantz SR6005 | SR6005 User Manual - English - Page 13
this unit. When the setup microphone is connected, the following screen is displayed. AUTO SETUP AUDYSSEY AUTO SETUP MultEQ STEP1 Preparation Connect the speakers and place them according to the recommendations in the manual. Set the following items if necessary. Amp Assign Channel Select Auto - Marantz SR6005 | SR6005 User Manual - English - Page 14
enters "Evening" mode. nn When turning Dynamic Volume off Use p to select "No", and then press ENTER. NOTE After performing Audyssey Auto Setup, do not change the speaker connections or subwoofer volume. In event of a change, perform Audyssey Auto Setup again. 10 Remote control operation buttons - Marantz SR6005 | SR6005 User Manual - English - Page 15
press ENTER. Retrieving Audyssey Auto Setup settings If you set "Restore" to "Yes", you can return to Audyssey Auto Setup measurement result (value calculated at the start by MultEQ®) even when you have changed each setting manually. Information Remote control operation buttons Move the cursor - Marantz SR6005 | SR6005 User Manual - English - Page 16
(cinema, music, etc.) or according to your liking (vpage 31 "Selecting a listening mode (Surround mode)"). When power is switched to standby Press STANDBY. GPower indicator status in standby modeH • Normal standby : Red • When "HDMI Control" is set to "ON" : Orange You can also switch the power to - Marantz SR6005 | SR6005 User Manual - English - Page 17
media and external devices. Audio and Video TV Blu-ray Disc player DVD player Video cassette recorder Set-top box (Satellite tuner or cable TV) Game console Digital camcorder Audio iPod® USB memory device CD player SIRIUS satellite radio HD Radio receiver Wireless receiver (RX101) Connection vpage - Marantz SR6005 | SR6005 User Manual - English - Page 18
Audio/Video Adjust Information Auto Setup Manual Setup Input Setup Component video connectors Video connector Component video connectors Video connector Component video connectors Video connector Component video connectors Video connector Adjust various audio and video parameters Input BD Mode - Marantz SR6005 | SR6005 User Manual - English - Page 19
3D video content. About ARC (Audio Return Channel) function The Audio Return Channel in HDMI 1.4a enables a TV, via a single HDMI cable, to send audio data "upstream" to this unit. NOTE • To enable the ARC function, set "HDMI Control" to "ON" (vpage 64). • When connecting a TV that does not support - Marantz SR6005 | SR6005 User Manual - English - Page 20
the input source is assigned. HDMI Setup (vpage 64) Make settings for HDMI video/audio output. • RGB Range • Auto Lip Sync • HDMI Control • Standby Source • HDMI Audio Out • Power Off Control NOTE The audio signals output from the HDMI connectors are only the HDMI input signals. • When this - Marantz SR6005 | SR6005 User Manual - English - Page 21
to this unit via an HDMI connection. For details, see "About ARC (Audio Return Channel) function" (vpage 15) or refer to the instruction manual for your TV. Cables used for connections Video cable (sold separately) Video cable (Yellow) (Green) Y Y Component video cable (Blue) PB PB (Red - Marantz SR6005 | SR6005 User Manual - English - Page 22
For instructions on HDMI connections, see "Connecting an HDMI-compatible device" (vpage 15). Cables used for connections Video cable (sold separately) Video cable (Yellow) Audio cable (sold separately) (White) L L Audio cable (Red) R R Video cassette recorder VIDEO AUDIO VIDEO VIDEO - Marantz SR6005 | SR6005 User Manual - English - Page 23
(2nd generation) • iPod nano (1st generation) • iPhone • iPhone 3G • iPhone 3GS Digital camcorder VIDEO VIDEO OUT AUDIO OPTICAL OUT AUDIO OUT LR Marantz does not guarantee that all USB memory devices will operate LR or receive power. When using a portable USB connection type HDD of the kind to - Marantz SR6005 | SR6005 User Manual - English - Page 24
connector on the SIRIUS service. • Position the Home Tuner antenna near a south-facing window to receive the best signal. For details, see "Listening to SIRIUS satellite radio" (vpage 27). When making connections, also refer to the operating instructions of the SiriusConnect Home Tuner. NOTE Keep - Marantz SR6005 | SR6005 User Manual - English - Page 25
can receive and playback audio signals from other devices using the Bluetooth Communication Function. • Use a Bluetooth device that is A2DP compatible (vpage 88 "A2DP"). • You can also use wireless receiver RX101 as an external IR receiver. • For instructions on the wireless receiver settings, refer - Marantz SR6005 | SR6005 User Manual - English - Page 26
with multi-channel sound audio output jacks to enjoy music and video. • The video signal can be set "Input Mode" (vpage 55) to "7.1CH IN". "7.1CH IN" can also be selected with A/D on the remote control unit. When a device is connected to the SBL/SBR terminal of 7.1CH INPUT terminals, set "Amp - Marantz SR6005 | SR6005 User Manual - English - Page 27
Select" menu q Press AMP and the press SOURCE mode (Surround mode) (vpage 31) Playback (Advanced operation) (vpage 42) Important information Before starting playback, make the connections between the different components and the settings on the receiver. NOTE Also refer to the operating instructions - Marantz SR6005 | SR6005 User Manual - English - Page 28
encoded in WMA format when ripped from a CD, etc. on a computer may be copyright protected, depending on the computer's settings. WMA (Windows Media Audio) MP3 (MPEG-1 Audio Layer-3) MPEG-4 AAC WAV GCompatible formatsH Sampling frequency Bit rate or Bit length Extension 32/44.1/48 kHz 48 - 192 - Marantz SR6005 | SR6005 User Manual - English - Page 29
playback in M-DAX mode (vpage 59). The default setting is "OFF". • If the USB memory device is divided into multiple partitions, only the top partition can be selected. • This unit is compatible with MP3 files conforming to "MPEG-1 Audio Layer-3" standards. NOTE • Note that Marantz will accept no - Marantz SR6005 | SR6005 User Manual - English - Page 30
and hold) Remote / Direct mode switching RETURN 6 7 (Press and hold) 1 8 9 3 2 Return Manual search (fast-reverse/fast-forward) Playback / Pause Auto search (cue) Pause Stop REPEAT Repeat playback RANDOM Random (Shuffle) playback TV POWER TV power on/standby (Default : Marantz) TV INPUT - Marantz SR6005 | SR6005 User Manual - English - Page 31
your satellite-ready receiver. Satellite Radio is available to residents of the US (except Alaska and Hawaii) and Canada. Satellite Radio delivers begin enjoying the service. Easy to follow installation and setup instructions are provided with the satellite tuners. Whichever service you choose, there - Marantz SR6005 | SR6005 User Manual - English - Page 32
has been input. 3 Press ENTER to set that channel. Reception switches to the selected channel. • "UPDATING" is displayed while the encording code is being updated. • "SIRIUS UPDATING" is displayed when updating SIRIUS tuner firmware. • Refer to "Troubleshooting" - "SIRIUS Satellite Radio" (vpage 91 - Marantz SR6005 | SR6005 User Manual - English - Page 33
The indicator lights on the display when an HD Radio station is tuned in. • When "HD-AUTO" (tuning mode) is selected, only HD Radio stations are tuned in. • If "AUTO" (tuning mode) is selected, both HD Radio and analog stations are tuned in. w To tune in manually (Manual tuning) Press T.MODE to turn - Marantz SR6005 | SR6005 User Manual - English - Page 34
is cancelled. 3 When setting is completed, press ENTER. is being received. The modes Tuning (up/down) Preset channel selection (1 - 8) / Direct frequency tuning (0 - 9) Preset channel block selection Preset memory registration TV power on/standby (Default : Marantz) Switch TV input (Default : Marantz - Marantz SR6005 | SR6005 User Manual - English - Page 35
the main unit. Press SURR. MODE and the modes are switched as shown below. AUTO*(STEREO) STEREO DOLBY PLgz DOLBY PLg(x) Movie DOLBY PLg(x) Music DOLBY PLg(x) Game DOLBY VS NEURAL MULTI CH STEREO DTS NEO:6 music zz For "AUTO", press AUTO on the amplifier or remote control unit. DTS NEO:6 cinema - Marantz SR6005 | SR6005 User Manual - English - Page 36
remote control unit can be obtained. • Select the surround mode while viewing the display on the screen (v"Displaying the currently playing surround mode" at right). • Which decoder can be selected depends on the input signal, the settings of "Amp MULTI CH IN 7.1 DOLBY VS Multi-channel playback z1 - Marantz SR6005 | SR6005 User Manual - English - Page 37
function as with the remote control unit can be obtained. • Each time P.DIRECT is pressed, the direct mode is switched. • To cancel, press P.DIRECT again. • Video signals are only output when HDMI signals are played in the PURE DIRECT mode. NOTE When in the PURE DIRECT mode, the menu screen is - Marantz SR6005 | SR6005 User Manual - English - Page 38
than 7.1-channel system with surround back speakers) vpage 35 F Playback (Advanced operation) vpage 42 F Playback in ZONE2 (Separate room) vpage 45 F How to make detailed settings vpage 47 F Operating the connected devices by remote control unit vpage 69 34 - Marantz SR6005 | SR6005 User Manual - English - Page 39
a wide range of speaker installation/connection/setting procedures. For details on installing/connecting/setting 7.1 channel audio that uses surround back speakers, see "Simple version (Simple setup guide)" (vpage 4). Use the Audyssey® Auto Setup function of this unit to automatically detect - Marantz SR6005 | SR6005 User Manual - English - Page 40
the method of connecting the TV, see page 6. 7.1-channel (Front height speaker) connection For 7.1-channel (Front height speaker) playback, set "Set up "Amp Assign"" (vpage 39) to "Normal". NEDERLANDS SVENSKA 6.1-channel (Surround back speaker) connection If using only one surround back speaker - Marantz SR6005 | SR6005 User Manual - English - Page 41
"Set up "Amp Assign"" (vpage 39) to "Normal". NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH Connect Front A/B connection The second set of front speakers can be connected to the FRONT B/HEIGHT terminals. In this case, perform the settings using the SPKR A/B button on the remote control - Marantz SR6005 | SR6005 User Manual - English - Page 42
Amp connection A bi-amp connection is to connect separate amplifiers to the tweeter terminals and woofer terminals of speakers compatible with the bi-amp and you can enjoy playback with higher-quality sound. In this case, set "Set up "Amp Assign"" (vpage 39) to "SPKR-C". FL SW FR nnFor connecting - Marantz SR6005 | SR6005 User Manual - English - Page 43
can be reduced (vpage 39 "Set up "Channel Select""). 1 Set up the remote control unit nn Set up the operation mode Press AMP to set the remote control unit to amplifier operation mode. 2 Connect the setup microphone. Press AMP When the setup microphone is connected, the following screen is - Marantz SR6005 | SR6005 User Manual - English - Page 44
component. nnConnection Use the remote connection cable (supplied with a Marantz audio component you want to connect) to connect the REMOTE CONTROL OUT terminal of this unit to the REMOTE CONTROL IN terminal of the component to be connected. nnSetting Set the remote control switch located on the - Marantz SR6005 | SR6005 User Manual - English - Page 45
below beforehand. q Turn on the power of this unit. w Turn off the power of this unit from the external controller. e Check that the unit is in the standby mode. in Set as Necessary Set to change the conditions for linked operation via the DC OUT (TRIGGER OUT) jack. "Trigger Out" (vpage 67) NOTE - Marantz SR6005 | SR6005 User Manual - English - Page 46
HDMI control. • Some functions may not operate depending on the connected TV or player. Check the user guide of each device for details beforehand. • When "Power Off Control" on the menu is set to "OFF" (vpage 64), this unit is not set to standby even if the connected device is in the standby mode - Marantz SR6005 | SR6005 User Manual - English - Page 47
goes into standby once the set time has elapsed. This is convenient for playing sources while going to sleep. 1 Press AMP to set the remote control unit to amplifier operation mode. 2 Press SLEEP and display the time you want to set. The indicator on the display lights. Adjusting the - Marantz SR6005 | SR6005 User Manual - English - Page 48
nnPersonal memory plus function This function sets the settings (input mode, surround mode, HDMI output mode, MultEQ®, Dynamic EQ®, Dynamic Volume®, audio delay etc.) last selected for the individual input sources. ON/STANDBY ENTER ON/STANDBY Press ON/STANDBY while you press and hold AUTO - Marantz SR6005 | SR6005 User Manual - English - Page 49
the ZONE2's amplifier and played with that amplifier. Connection (ZONE2) MAIN ZONE L R This unit "Amp Assign" setting (vpage 61) and audio signals output the operating instructions of the connected devices. NOTE It is not possible to play the digital audio signals input from the HDMI, COAXIAL or - Marantz SR6005 | SR6005 User Manual - English - Page 50
remote control unit switches to the operating mode for ZONE2. 2 Press ON to turn on the ZONE2 power. The indicator on the display lights. • When STANDBY is pressed, ZONE2 turns off. • Power in ZONE2 can be turned on or off by pressing ZONE2 ON/OFF on the main unit. 3 Press INPUT df. The audio - Marantz SR6005 | SR6005 User Manual - English - Page 51
use Audio Setup ZONE2 Setup Option Setup Speaker Setup HDMI Setup Audio Setup ZONE2 Setup Option Setup 5. Input Setup (Example: HD Radio) Make detailed speaker settings INPUT SETUP Auto Preset Preset Skip Parental Lock Antenna Aiming Auto Preset Preset Skip Preset Name Video Input Mode Rename - Marantz SR6005 | SR6005 User Manual - English - Page 52
Audio/Video Adjust Information Auto Setup Manual Setup Input Setup q Display when changing settings Adjust various audio and video parameters INPUT SETUP INPUT ASSIGN Default [ HDMI buttons on the remote control unit, see page 49. q Press i to select "Default", then press ENTER to set. w Press - Marantz SR6005 | SR6005 User Manual - English - Page 53
remote control unit. • Select a character on the TV screen to input characters. Normal screen nnDisplay of a normal input screen INPUT SETUP RENAME DVD Default DVD q Using the cursor buttons 1 Display the screen for inputting characters (vpage 47 "Menu map"). 2 Use o p to set i Guide for - Marantz SR6005 | SR6005 User Manual - English - Page 54
ENTER. ESPAÑOL NEDERLANDS SVENSKA Input Setup Perform settings related to input source playback. • You do not have to change the settings to use the unit. Make settings when needed. Menu operation 1 Press AMP to set the remote control unit to amplifier operation mode. 2 Press MENU. The menu is - Marantz SR6005 | SR6005 User Manual - English - Page 55
for best signal Video (vpage 53) INPUT SETUP VIDEO Change memory blocks RETURN Return Input Mode (vpage 55) INPUT SETUP INPUT MODE Select ENTER Enter RETURN Return Change HDMI input connector assignment Rename (vpage 55) INPUT SETUP RENAME Video Select Video Mode Video Convert i/p Scaler - Marantz SR6005 | SR6005 User Manual - English - Page 56
defaults. No : Do not reset to the defaults. NEDERLANDS SVENSKA Input Assign Input Setup Examples of input assign menu screen displays INPUT SETUP INPUT ASSIGN q Input Source w HDMI input Default [ HDMI ] [ DIGITAL ] [ COMP ] e Digital audio input r Component video input BD DVD q VCR - Marantz SR6005 | SR6005 User Manual - English - Page 57
video signal assigned at "HDMI" combined with the audio signal assigned at "Input Assign" - "Digital", select "Digital" at "Input Mode" (vpage 55). • The audio signals input from the analog and digital connectors are not output to the monitor. • When "HDMI Control" (vpage 64) is set to "ON", HDMI - Marantz SR6005 | SR6005 User Manual - English - Page 58
resolution. NEDERLANDS SVENSKA Input Setup Setting items Resolution Set the output resolution. Resolution (Analog) : Analog Video Resolution (HDMI) : HDMI Setting details Auto : The number of pixels the TV connected to the HDMI output connector supports is detected automatically and the - Marantz SR6005 | SR6005 User Manual - English - Page 59
does not light, check the digital input connector assignment and the connections. • The surround mode cannot be set if the input mode is set to "7.1CH IN". • If "HDMI Control" is set to "ON" and a TV compatible with the ARC is connected via the HDMI OUT connectors, the input mode whose input - Marantz SR6005 | SR6005 User Manual - English - Page 60
depend on the signal being input and the currently set surround mode. For details on the adjustable parameters, see "Surround modes and surround parameters" (vpage 83). Menu operation 1 Press AMP to set the remote control unit to amplifier operation mode. 2 Press MENU. The menu is displayed on the - Marantz SR6005 | SR6005 User Manual - English - Page 61
direct mode. Bass -6dB - +6dB Adjust low frequency range (bass). "Bass" can be set when "Tone Control" is set to "ON". Treble -6dB - +6dB Adjust high frequency range (treble). "Treble" can be set when "Tone Control" is set to "ON". Audio/Video Adjust nnAudyssey Settings Default settings - Marantz SR6005 | SR6005 User Manual - English - Page 62
NEDERLANDS SVENSKA Audio/Video Adjust Setting items Dynamic Volume® Solve the problem of large variations in volume level between TV, movies and other content (between quiet passages and loud passages, etc.) by automatically adjusting to the user's preferred volume setting. Setting details Heavy - Marantz SR6005 | SR6005 User Manual - English - Page 63
M-DAX indicator lights. • This can also be set by pressing M-DAX on the remote control unit. Each time M-DAX is pressed, the setting is changed as shown below. OFF LOW MID HIGH nnAudio Delay Default settings are underlined. While viewing video, manually adjust the time to delay audio output - Marantz SR6005 | SR6005 User Manual - English - Page 64
High Enhancer 0 - +12 Emphasize picture contours. Setting details SVENSKA • "DNR" and "Enhancer" are each effective with HDMI output. • The value set at "Picture Adjust" is stored in the memory individually for each input source. 60 Remote control operation buttons Move the cursor (Up/Down - Marantz SR6005 | SR6005 User Manual - English - Page 65
(vpage 61) HDMI Setup (vpage 64) Audio Setup (vpage 64) MANUAL SETUP SPEAKER SETUP MANUAL SETUP HDMI SETUP MANUAL SETUP AUDIO SETUP Amp Assign Speaker Config. Bass Setting Distance Channel Level Crossover Frequency RGB Range Auto Lip Sync HDMI Audio Out HDMI Control Standby Source Power Off - Marantz SR6005 | SR6005 User Manual - English - Page 66
SVENSKA Setting items Bass Setting Set subwoofer and LFE signal range playback. Manual Setup Setting details Subwoofer Mode : Select "S.Back" setting (vpage 62) is set to "1spkr", "S.Back" is displayed. • 0.0ft - 60.0ft / 0.00m - 18.00m : Set the distance. 62 Remote control operation buttons - Marantz SR6005 | SR6005 User Manual - English - Page 67
settings. • Yes : Reset to the defaults. • No : Do not reset to the defaults. When you select "Default" and press ENTER, the "Default Setting?" prompt is displayed. Select either "Yes" or "No", and press ENTER. ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH Manual Setup Setting items Setting - Marantz SR6005 | SR6005 User Manual - English - Page 68
the HDMI control function. Make sure that the TV and HDMI are connected when you perform HDMI control. • If the "HDMI Control" settings have been changed, always reset the power to connected devices after the change. Manual Setup Setting items Setting details Standby Source Sets the HDMI input - Marantz SR6005 | SR6005 User Manual - English - Page 69
main unit and remote control unit. -40dB (41) : Fix volume at -40 dB. Set when adjusting volume by external amplifier. 0dB (81) : Fix volume at 0 dB. Set when adjusting volume by external amplifier. Volume Limit Make a setting for maximum volume. When "Amp Assign" (vpage 61) is set to "ZONE2", the - Marantz SR6005 | SR6005 User Manual - English - Page 70
not activated. Setting items GUI (Continued) Manual Setup Setting details Wall Paper : Set wallpaper to display in the background when playback is stopped, etc. • Picture : Set the background to a picture (Marantz logo). • Black : Set the background to black. Format : Set the video signal format - Marantz SR6005 | SR6005 User Manual - English - Page 71
setting. Setup Lock Protect settings from inadvertent change. Manual Setup Setting details ON : Display is always on. Display Auto OFF : Display is off except when showing the status display. Display OFF : Display is always off. This can also be set by pressing DISPLAY on the remote control unit - Marantz SR6005 | SR6005 User Manual - English - Page 72
When the main unit is in standby mode, press ON/STANDBY while holding down o and MENU on the main unit. The infrared light receiving function on the main unit is enabled. NOTE If a remote control receiver unit (purchased separately) is not connected, do not perform this setting. If you do, you will - Marantz SR6005 | SR6005 User Manual - English - Page 73
code is registered for this button, the remote control unit of this unit can control another devices. NOTE If the mode of the remote control unit is set to other than ampoperation mode, press AMP to switch the remote control unit to the amp-operation mode to perform the following operations: • For - Marantz SR6005 | SR6005 User Manual - English - Page 74
be registered. • In the factory settings, remote control codes for all Marantz products are registered. nnButtons used mode. For details on operation with the remote control unit, see pages 25, 26, 29, 30, 71. Registering preset codes The following two methods can be used for registering the reset - Marantz SR6005 | SR6005 User Manual - English - Page 75
, the selected source reset to its initial code. Operating components The supplied remote control unit can control a component other than this unit. 1 Switch the input source (vpage 23). 2 Operate the component. • For details, refer to the component's operating instructions. nnBlu-ray Disc - Marantz SR6005 | SR6005 User Manual - English - Page 76
the remote control display. 4 Select the button to be learned. LEARN indicator lights up. NOTE • The learning function is unavailable for all SOURCE ON/OFF, MACRO and HDMI in any mode. • The learning function is unavailable for all buttons in TUNER mode, AMP mode, NET/USB mode and M-XP mode. • The - Marantz SR6005 | SR6005 User Manual - English - Page 77
1 Press and hold down SET and SOURCE SEL until the LEARN indicator blinks. 2 Press and hold down HDMI and press ON and STANDBY . LEARN indicator lights. 3 Press ENTER to continue erasing. "ERASE" is shown in the remote control display, and the mode returns to learning mode. • To cancel the erasing - Marantz SR6005 | SR6005 User Manual - English - Page 78
1 Press and hold SET and MACRO together until "MACRO" flashes in the LEARN indicator, MACRO indicator and remote control display. 2 Press the macro operation step number is shown in the remote control display. • To record the amp input source, press AMP first, followed by the input source switching - Marantz SR6005 | SR6005 User Manual - English - Page 79
of the remote control, and the buttons on the remote control light for 2 seconds. If the Light button is pressed while the buttons are lit, the buttons remain lit for another 2 seconds. • Backlight is set on in the factory settings. nnDisabling the backlight Press and hold both SET and STANDBY until - Marantz SR6005 | SR6005 User Manual - English - Page 80
, we list various information related to this unit. Please refer to this information as needed. F Part names and functions vpage 77 F Other information vpage 82 F Troubleshooting vpage 90 F Specifications vpage 93 F Index vpage 94 76 - Marantz SR6005 | SR6005 User Manual - English - Page 81
knob 24) t Remote control sensor 81) y M-DAX indicator 59) u Display 78) i PURE DIRECT indicator 33) o INPUT SELECTOR knob 23) Q0 Q1 Q2 Q3 Q4 Q5 Q6 Q0 Headphones jack When the headphones are plugged into this jack, audio will no longer be output from the connected speakers or from the - Marantz SR6005 | SR6005 User Manual - English - Page 82
power is turned on (vpage 46). Q1 Input mode indicators Set the audio input modes for the different input sources (vpage 55). Q2 HDMI indicator This lights when playing using HDMI connections. Q3 Tuner reception mode indicators These light according to the reception conditions when the input source - Marantz SR6005 | SR6005 User Manual - English - Page 83
AC inlet (AC IN 6) u COMPONENT VIDEO connectors 17, 18) i HDMI connectors 16) o Digital audio connectors 17, 18, 20) Q0 VIDEO connectors 17, 18) Q1 FLASHER IN jack Used when using a control BOX or other such control devices to control this unit. Q2 REMOTE CONTROL jacks 40) Q3 M-XPort jack 21 - Marantz SR6005 | SR6005 User Manual - English - Page 84
SET button 70 - 75) r Input mode Remote control signal transmitter Q7 Power buttons (ON, STANDBY 7, 12) Q8 Speaker A/B button (SPKR A/B 23) Q9 TEST TONE button 63) W0 Muting button (MUTE 24) W1 Light button 75) W2 Master volume control buttons (VOLUME 24) W3 Surround mode Audio Video select button - Marantz SR6005 | SR6005 User Manual - English - Page 85
be disposed of in accordance with the local regulations regarding battery disposal. NOTE The set may function improperly or the remote control unit may not operate if the remote control sensor is exposed to direct sunlight, strong artificial light from an inverter type fluorescent lamp or infrared - Marantz SR6005 | SR6005 User Manual - English - Page 86
video Master Audio, and HDMI, the HDMI Logo and HighDefinition Multimedia Interface are trademarks or registered trademarks of HDMI Service not available in Alaska and Hawaii. "Made for iPod" and "Made for iPhone" mean that an electronic accessory has been designed to connect specifically users are - Marantz SR6005 | SR6005 User Manual - English - Page 87
Headphone S z1 A signal for each channel contained in an input signal is output as audio. z2 Only when "Subwoofer Mode" is set to "LFE+Main" (vpage 62), sound is output from the subwoofer. z3 For HD Audio whose sampling frequency of an input signal is more than 96kHz, this sound parameter cannot - Marantz SR6005 | SR6005 User Manual - English - Page 88
This item cannot be set when "MultEQ" (vpage 57) is set to "OFF" or "Manual". z9 This item cannot be set when "Dynamic EQ" (vpage 58) is set to "OFF". z10 This item can be set when the input signal is analog, PCM 48 kHz or 44.1 kHz. z11 For HD Audio whose sampling frequency of an - Marantz SR6005 | SR6005 User Manual - English - Page 89
LINEAR PCM (multi ch) (2ch) DTS-HD DTS-HD Master Audio DTS-HD High Resolution Audio DTS EXPRESS Input signal types and formats DTS DTS ES DTS ES 62) is set to "None", this surround mode cannot be selected. z4 This surround mode can be selected when "Amp Assign" (vpage 61) is set to "Normal". - Marantz SR6005 | SR6005 User Manual - English - Page 90
HD Master Audio DTS-HD High Resolution Audio DTS set to "1spkr" or "None", this surround mode cannot be selected. z3 If "Speaker Config." - "F. Height" (vpage 62) is set to "None", this surround mode cannot be selected. z4 This surround mode can be selected when "Amp Assign" (vpage 61) is set - Marantz SR6005 | SR6005 User Manual - English - Page 91
Wall paper COMPONENT A A A VIDEO VIDEO COMPONENT COMPONENT - COMPONENT HDMI A A COMPONENT A A A HDMI A COMPONENT A A COMPONENT A No video signal output ITALIANO VIDEO A A VIDEO A A A VIDEO A VIDEO A VIDEO VIDEO A VIDEO A VIDEO A VIDEO FRANÇAIS DEUTSCH ENGLISH HDMI Only the menu is - Marantz SR6005 | SR6005 User Manual - English - Page 92
frequency response problems in the listening area and also performs a fully automated surround system setup. Auto Lip Sync If you connect the receiver to a TV that supports the Auto Lip Sync function, it can automatically correct delay between the audio and video. B Bluetooth Bluetooth is a short - Marantz SR6005 | SR6005 User Manual - English - Page 93
HDMI This is an abbreviation of High-Definition Multimedia Interface, which is an AV digital interface that can be connected to a TV or amplifier. Video signal and audio unit, the power indicator blinks and the unit enters standby mode when an abnormality occurs. S Sampling frequency Sampling - Marantz SR6005 | SR6005 User Manual - English - Page 94
This unit amplifier circuit has failed. Turn off the power and please contact the Marantz service adviser. • Reset the microprocessor. GVideoH Symptom No picture appears. Cause/Solution • Check the TV connection. • Set the TV input correctly. II II 5 5 - 92 Page 6 7 GAudioH Symptom Audio is not - Marantz SR6005 | SR6005 User Manual - English - Page 95
connectors. • When outputting HDMI audio from the speakers, set "HDMI Audio Out" on the menu to "AMP". • When outputting HDMI audio from a TV, set "HDMI Audio Out" on the menu to "TV". No video is output with HDMI connection. • Check the connection of the HDMI connectors. • Set the input source to - Marantz SR6005 | SR6005 User Manual - English - Page 96
w marks. • The set's remote control sensor is exposed to strong light (direct sunlight, inverter type fluorescent bulb light, etc.). Move the set to a place in which the remote control sensor will not be exposed to strong light. Page 81 81 81 81 81 NEDERLANDS SVENSKA Resetting the microprocessor - Marantz SR6005 | SR6005 User Manual - English - Page 97
Specifications nn Audio section • Power amplifier Rated output: Maximum effective output power: Output connectors: • Analog Input sensitivity/Input impedance: Frequency response: S/N: nn Video section • Standard video (Source Direct mode) 98 dB (IHF-A weighted, Source Direct mode) 1 Vp Remote control - Marantz SR6005 | SR6005 User Manual - English - Page 98
Lip Sync 64, 88 Auto Preset 51 Auto Setup 7, 39 vvB Base Curve Copy 59 Bass 57, 65 Bass Setting 62 Bi-amp 38 Bluetooth 21, 88 Brightness 60 vvC Cable Audio cable 6, 17, 18, 19, 20, 22 Coaxial digital cable 17, 18 Component video cable 17, 18 HDMI cable 6, 16 Optical cable 17, 19, 20 - Marantz SR6005 | SR6005 User Manual - English - Page 99
panel 79 Reference Level Offset 58 Remote control settings 68 Remote control unit 69, 80 Inserting the batteries 81 Operating AV equipment 69 Operating components 71 Registering Preset Codes 70 Remote mode 26 Rename 55 Repeat 55 Resetting the microprocessor 92 Resolution 54 RGB Range - Marantz SR6005 | SR6005 User Manual - English - Page 100
- Marantz SR6005 | SR6005 User Manual - English - Page 101
JVC K Kenwood Koss M Magnavox Marantz Marantz (Blu-ray) Mitsubishi O Onkyo 2010 Device select : SAT Satellite Receiver A Alphastar 4027 Amstrad 4046, 4047 Teac Thomson Toshiba U Uniden Universum V Video Pall Z Zenith 4044, 4045, 4057 , 1149 Plasmsync Portland Price Club Prism Proscan Proton - Marantz SR6005 | SR6005 User Manual - English - Page 102
AUDIO LABS C CALIFORNIA CARVER CASIO CURTIS D DENON E EMERSON F FISHER G GE GENEXXA H HARMON HITACHI I INKEL J JC PENNEY JVC K KARDON KRELL L LUXMAN LX I M MAGNAVOX MARANTZ MATHES MCS MGA MISSION MITSUBISHI N NAD NAKAMICHI NEC MCS NIKKO O ONKYO OPTIMUS 3001, 3002, 3003 3004, 3005, 3006 3007 3008 - Marantz SR6005 | SR6005 User Manual - English - Page 103
14.5 (5/8) 146.5 (5 3/4) 161.0 (6 3/8) 17.5 (11/16) Dimensions / Dimensions / Dimensions Unit : mm (in) 440.0 (17 3/8) 348.5 (13 11/16) 389.0 (15 3/8) 22.5 (15/16) - Marantz SR6005 | SR6005 User Manual - English - Page 104
D&M Holdings Inc. Printed in China 5411 10482 024M
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
 |
 |
AV Surround Receiver
SR6005
ESPAÑOL
FRANÇAIS
ENGLISH