Marantz VP-10S1 VP10S1 User Manual
Marantz VP-10S1 Manual
 |
View all Marantz VP-10S1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Marantz VP-10S1 manual content summary:
- Marantz VP-10S1 | VP10S1 User Manual - Page 1
Model VP-10S1 User Guide DLPTM Projector - Marantz VP-10S1 | VP10S1 User Manual - Page 2
persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO - Marantz VP-10S1 | VP10S1 User Manual - Page 3
for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. 16. To prevent fire or shock hazard, - Marantz VP-10S1 | VP10S1 User Manual - Page 4
's vent. Before use, carefully read the User Guide of the projector and the Lamp Replacement Instructions. Remember to handle the lamp with care. In the event of serious trouble, call for Marantz authorized dealer. • Never look directly into the lamp with unprotected eyes while lit. The bright light - Marantz VP-10S1 | VP10S1 User Manual - Page 5
32 Trigger 2 ...33 Preset ...34 MAINTENANCE ...35 Lamp Life and Replacement ...35 Lamp Unit Replacement ...36 Color Temperature Adjustment ...38 Lens Cleaning ...39 Replacement Parts ...39 Optional Accessories...39 SPECIFICATIONS ...40 GLOSSARY ...41 TROUBLESHOOTING ...42 ERROR MODE...43 ON SCREEN - Marantz VP-10S1 | VP10S1 User Manual - Page 6
projector from a ceiling, contact the Marantz Authorized Dealer or Service Center. To ensure safe installation, the ceiling must be reinforced to support the projector's weight. Do not install the projector yourself. Hanging the projector distance. • The vent, lamp cover and adjacent areas may - Marantz VP-10S1 | VP10S1 User Manual - Page 7
the lamp breaks, contact your nearest Marantz Authorized Dealer or Service Center. CAUTION HIGH-PRESSURE LAMP MAY EXPLODE IF IMPROPERLY HANDLED. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. PB/CB PR/CR RGB IN DVI-D IN RS-232C REMOTE INT. EXT. IN OUT TRIG. LIGHT 1 OFF ON 2 0'' 0/ "$*/ ʙ - Marantz VP-10S1 | VP10S1 User Manual - Page 8
remote controller or by operating buttons on the projector, the user can zoom in/out, focus the image, and vertically and horizontally shift the lens. ❖ Automatic color temperature adjustment • Using the included color temperature sensor, the VP- 10S1 HDCP supported DVI-D Marantz VIP lamp - DLP, - Marantz VP-10S1 | VP10S1 User Manual - Page 9
cap x 1 • Attachment for Color temperature sensor x 1 • Remote controller x 1 STANDBY POWER ON PATTERN PATT. MENU V-MUTE ENTER STD NORMAL S-VIDEO DYNA. ZOOM VIDEO USER THROUGH RGB CINEMA INFO AUX LIGHT REMOTE CONTROLLER RC-12VPS3 • AA batteries x 2 • Color temperature sensor x 1 - Marantz VP-10S1 | VP10S1 User Manual - Page 10
when power is on. When power is shut off, the lamp flashes for about 1 min before going out. IR sensor i STANDBY indicator Lights up red when the projector is on standby. o WARNING indicator Lights up or flashes if trouble occurs with the projector. For error mode, see the list in "Error Mode List - Marantz VP-10S1 | VP10S1 User Manual - Page 11
Through). For setting instructions, see "Trigger 2" ( pg. 33). Notes: • Do not use the TRIG. 1 or 2 jack for power supply. • To connect with external devices, use an ordinal 3.5mm mini- plug (mono) cable. m REMOTE IN / OUT jacks Use to control this projector when combined with Marantz products into - Marantz VP-10S1 | VP10S1 User Manual - Page 12
NORMAL S-VIDEO DYNA. ZOOM VIDEO USER THROUGH RGB CINEMA INFO AUX LIGHT REMOTE CONTROLLER RC-12VPS3 ¡5 ¡6 ¡7 ¡8 ¡9 ™0 ™1 ™2 ™3 ™4 ™5 a STANDBY button ( pg. 20) Sets the projector on standby provided power to the projector is on. s MENU button ( pg. 25) Displays the on-screen menu (*OSD - Marantz VP-10S1 | VP10S1 User Manual - Page 13
are objects between the remote controller and projector or if strong light shines on the projector's IR sensor. Remote Controller 60 16.4ft (5m) Remote Controller 16.4ft 60 (5m) Remote Controller 16.4ft 60 (5m) VP-10S1 60 16.4ft (5m) Remote Controller G VP-10S1 STANDBY ON PATTERN INPUT - Marantz VP-10S1 | VP10S1 User Manual - Page 14
in Use" ( pg. 2) in this User Guide. • Specialized skill is required to hang this projector from a ceiling. For safety reasons, do not install the projector yourself. Contact your nearest Marantz Authorized Dealer or Service Center. Hanging the projector from the ceiling requires a separately solder - Marantz VP-10S1 | VP10S1 User Manual - Page 15
.59 313.77 470.65 355.60 533.40 418.36 627.53 522.95 784.42 627.53 941.30 Note : When installing the projector, allow for ±5% tolerance in the above projection distances. ❖ How to calculate projection distance • When using the LN10VP32 lens Min. projection distance (inch) = Diagonal (inch - Marantz VP-10S1 | VP10S1 User Manual - Page 16
7.17 10.76 7.97 11.95 9.03 13.55 10.63 15.94 13.28 19.92 15.94 23.91 Note : When installing the projector, allow for ±5% tolerance in the above projection distances. ❖ How to calculate projection distance • When using the LN10VP32 lens Min. projection distance (m) = Diagonal (inch) x 3.188 - Marantz VP-10S1 | VP10S1 User Manual - Page 17
.80 288.00 432.00 326.40 489.60 384.00 576.00 480.00 720.00 576.00 864.00 Note : When installing the projector, allow for ±5% tolerance in the above projection distances. ❖ How to calculate projection distance • When using the LN10VP32 lens Min. projection distance (inch) = Diagonal (inch - Marantz VP-10S1 | VP10S1 User Manual - Page 18
49 9.73 6.58 9.88 7.32 10.97 8.29 12.44 9.75 14.63 12.19 18.29 14.63 21.95 Note : When installing the projector, allow for ±5% tolerance in the above projection distances. ❖ How to calculate projection distance • When using the LN10VP32 lens Min. projection distance (m) = Diagonal (inch - Marantz VP-10S1 | VP10S1 User Manual - Page 19
projector and any connected equipment before making any connections. • Use the proper cables for each connection. See the instruction manual of each connected device. • Securely insert the plug into the jack to connect cables. Loose connections can lead to trouble -D IN RS-232C REMOTE INT. EXT. IN - Marantz VP-10S1 | VP10S1 User Manual - Page 20
the instruction manual of that device. 1. Turn on power to the projector. ( pg. 17) 2. Set the Input signal of the projector to Marantz Authorized Dealer or Service Center. VIDEO IN S-VIDEO IN COMPONENTVIDEO IN 1 COMPONENTVIDEO IN 2 Y PB/CB PR/CR Y PB/CB PR/CR RGB IN DVI-D IN RS-232C REMOTE - Marantz VP-10S1 | VP10S1 User Manual - Page 21
focus pattern appears its sharpest, as shown below. 3. To adjust the size of the projected image, press the 3 / 4 buttons on the remote controller or projector. Tapping the buttons fine-adjusts the size. Holding the buttons down quickly changes the size. 4. Press the PATTERN button again to cancel - Marantz VP-10S1 | VP10S1 User Manual - Page 22
1 2, 3, 4, 5 PATT. MENU V-MUTE ENTER 1 2, 3, 4, 5 PATTERN INPUT MENU SPTOANWDEBRY ON ENTER INPUT ASPECT 1. Press the MENU button on the remote controller or projector to display the menu. 2. Select "Config" using the 3 / 4 buttons, then press the 2 button. 3. Select "Lens shift" using the - Marantz VP-10S1 | VP10S1 User Manual - Page 23
4 PATT. MENU V-MUTE ENTER 1 2, 3, 4 ON PATTERN INPUT MENU SPTOANWDEBRY ENTER INPUT ASPECT 1. Press the MENU button on the remote controller or projector to display the menu. 2. Select "Display" using the 3 / 4 buttons, then press the 2 button. 3. Select "Keystone V" or "Keystone H" using - Marantz VP-10S1 | VP10S1 User Manual - Page 24
the on position. The STANDBY indicator will light up. 3. Press the POWER ON button on the remote controller or the POWER button on the projector. The POWER ON indicator on the projector will light up. PATTERN INPUT MENU SPTOANWDEBRY ON STANDBY POWER ON PATTERN PATT. MENU V-MUTE ENTER ENTER - Marantz VP-10S1 | VP10S1 User Manual - Page 25
ENGLISH Selecting an Input signal You can select the Input signal from amongst the devices connected to the projector. Every time the INPUT button on the projector or the remote controller is pressed, the Input signal rotates in the order of COMPONENT 1 ➔ COMPONENT 2 ➔ S-VIDEO ➔ VIDEO ➔ RGB ➔ AUX. - Marantz VP-10S1 | VP10S1 User Manual - Page 26
ENGLISH When Using a 16:9 Screen • To project a video source of a 4:3 aspect ratio, use either the Full, Normal or Zoom mode. • To project a video source of a 16:9 aspect ratio such as 1080i, 1035i or 720p, use the Full mode. • To project squeezed video sources, use the Full mode. See "Setting" ( - Marantz VP-10S1 | VP10S1 User Manual - Page 27
ENGLISH When Using a 4:3 Screen • To project a video source of a 4:3 aspect ratio, use either the Full, Normal or Zoom mode. • To project a video source of a 16:9 aspect ratio such as 1080i, 1035i or 720p, use the Full mode. • To project squeezed video sources, use the Full mode. See "Setting" ( - Marantz VP-10S1 | VP10S1 User Manual - Page 28
(Configuration) pg. 32 Trigger 2 pg. 33 * Preset pg. 34 Auto Power Off Installation Language Focus / Zoom Lens Shift * Color Temp. Calibration Reset Lamp Life Reset All Enable / Disable Front / F. Ceiling Rear / R. Ceiling English Français Deutsch Español Italiano Português Yes / No Yes / No Yes - Marantz VP-10S1 | VP10S1 User Manual - Page 29
PATTERN INPUT MENU SPTOANWDEBRY ON ENTER INPUT ASPECT ❖ Picture Mode and Memory This projector offers 4 pictures modes: Theater, Standard, Dynamic and User. Select them by pressing the THEATER, STD, DYNA. and USER buttons on the remote controller. Moreover, each of these picture modes has 3 - Marantz VP-10S1 | VP10S1 User Manual - Page 30
Adjust You can adjust picture quality to your liking in each of the picture modes and save those adjustments in memory. This projector makes 3 memory indexes (1, 2 and 3) available for each picture mode. ❖ For a video signal input, the following adjustments can be made. Menu item Adjustment - Marantz VP-10S1 | VP10S1 User Manual - Page 31
ENGLISH Fine Menu Picture quality can be fine-adjusted from the Fine Menu. Note : Some menu items cannot be adjusted depending on the input signal. ❖ Luminance FineMenu Luminance Chrominance Sub Control Miscellaneous H Detail Gain 8 H Detail Threshold 11 H Edge Gain 6 H Edge Threshold 7 V - Marantz VP-10S1 | VP10S1 User Manual - Page 32
ENGLISH ❖ Sub Control FineMenu Luminance Chrominance Sub Control Miscellaneous Contrast Red 0 Contrast Green 0 Contrast Blue 0 Brightness Red 0 Brightness Green 0 Brightness Blue 0 Clamp Position 0 Clamp Width 0 Standard 1 Contrast Red : Sets how much red contrast comes out in - Marantz VP-10S1 | VP10S1 User Manual - Page 33
Cinema Black Setup High Off Full 16:9 Off Auto 0 IRE Standard 1 Lamp Mode High / Low High Bright On, Off High Bright On : Display brightest Adjusts black level to the source. - OSD Position You can select from three positions: 16:9, 4:3 and Through. Menu Picture Adjust Setting System Display - Marantz VP-10S1 | VP10S1 User Manual - Page 34
ENGLISH System You can make the following settings. Menu Picture Adjust Setting System Display Config Trigger 2 Preset Component 1 Auto Component 2 Auto S-Video Auto Video Auto RGB Auto DVI RGB Standard 1 Component 1 Component 2 S-Video Video RGB DVI Auto, NTSC, PAL, 480p, 540p, - Marantz VP-10S1 | VP10S1 User Manual - Page 35
ENGLISH Display You can make the following settings. Menu Picture Adjust Setting System Display Config Trigger 2 Preset Keystone V 0 Keystone H 0 Auto Adjust Picture Shift V 0 Picture Shift H 0 Size V 0 Size H 0 Phase 16 Standard 1 Menu item Keystone V (Electronic vertical keystone - Marantz VP-10S1 | VP10S1 User Manual - Page 36
any button on the projector other than the POWER button or any button on remote controller other than instructions on how to adjust color temperature, see "Color Temperature Adjustment" ( pg. 38). - Reset Lamp Life If you replace the lamp before the 1,500 hour lamp life, be sure to reset the lamp - Marantz VP-10S1 | VP10S1 User Manual - Page 37
to their factory defaults except the user-selected gamma curve and the lamp life counter. When you select "Yes", the following message appears trigger signal can be used to automatically match the screen aspect mode to projector operation, though it requires a powered dual aspect screen. On: 12 V - Marantz VP-10S1 | VP10S1 User Manual - Page 38
You can select a picture mode from the MENU screen. This projector offers 4 pictures modes: Theater, Standard, Dynamic and User. 1 - Saving settings in an index Select "Mode" from the above menu using the remote controller, then select an image mode from Theater, Standard, Dynamic and User. Next, - Marantz VP-10S1 | VP10S1 User Manual - Page 39
PATTERN INPUT MENU SPTOANWDEBRY ON ENTER STANDBY POWER ON PATTERN PATT. MENU V-MUTE ENTER - Approximately 2 minutes after the lamp reaches the end of its life, power to the projector shuts off and the WARNING indicator lights up red. If the below message appeared on the screen before power - Marantz VP-10S1 | VP10S1 User Manual - Page 40
may break under excessive force or mechanical shock. • Use only the Marantz original lamp unit LU10VPS1 (sold separately). ❖ How to Replace the Lamp Preparation: Turn off power to the projector before replacing the lamp. After the cooling fan stops, unplug the AC power cable and wait at least 1 hour - Marantz VP-10S1 | VP10S1 User Manual - Page 41
, turn on the projector and project an image. • If you replaced the lamp before 1,500 hours of service, see "Reset Lamp Life" ( pg. 32). • If you replaced the lamp after 1,500 hours of service, see "Resetting the Lamp Life Counter" ( pg. 36). 2 1 Lamp unit 9. Install a new lamp unit securely in - Marantz VP-10S1 | VP10S1 User Manual - Page 42
the sensor itself before adjusting color temperature. It takes about 10 minutes from when power to the projector is activated for the lamp's brightness to stabilize. Wait for lamp brightness to stabilize before adjusting color temperature. 1. Connect the cable of the color temperature sensor to the - Marantz VP-10S1 | VP10S1 User Manual - Page 43
button on the remote control or the POWER button on the projector to reactivate power lamp is on. Always shut off power to the projector and wait at least 60 minutes before cleaning the lens. Replacement Parts If replacement parts are needed, contact your nearest Marantz dealer or authorized service - Marantz VP-10S1 | VP10S1 User Manual - Page 44
3-chip DLPTM 0.8 inch 16:9 1280 x 720 pixels Digital Micromirror DeviceTM Lamp P- 1 T.M.D.S. compliant (Single link only) REMOTE CONTROL IN Miniature jack type x 1 REMOTE CONTROL OUT Miniature jack type x 1 AC cable (mini jack to RCA) x 1 • User Guide x 1 • Warranty Card (1 copy each for USA, - Marantz VP-10S1 | VP10S1 User Manual - Page 45
blue). Keystone Distortion of an image caused by projection to wrong vertical and horizontal angles. A/D converter (Analog/Digital signal converter) With this projector, all video signals are digitally processed by an A/D converter. The A/D converter converts analog video signals into data that - Marantz VP-10S1 | VP10S1 User Manual - Page 46
Try the following troubleshooting before calling for service. 1. Are the connections made properly ? 2. Are you operating the unit properly, following the instructions ? If the unit does not operate properly, check the items shown in the following table. If any trouble cannot be solved - Marantz VP-10S1 | VP10S1 User Manual - Page 47
cover is not closed properly. Close the cover correctly. The lamp has failed, or the lamp is completely worn out. Replace the lamp and reset lamp life. Projector internal temperature is higher than the allowed level. Trouble has occurred with the fan. Check if anything is blocking the exhaust - Marantz VP-10S1 | VP10S1 User Manual - Page 48
DIMENSIONS ❖ Top ENGLISH &/5&3 1"55&3/ */165 .&/6 108&3 45"/%#: 0/ - Marantz VP-10S1 | VP10S1 User Manual - Page 49
.com You can find your nearest authorized distributor or dealer on our website. JAPAN U.S.A. EUROPE Marantz Japan, Inc. Marantz America, Inc. Marantz Europe B.V. 35-1 Sagami Ohno 7-Chome, Sagamihara-shi, Kanagawa 228-8505, Japan 1100 Maplewood Drive, Itasca, IL 60143, U.S.A. P.O. Box 8744, 5605
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
 |
 |
Model
VP-10S1
User Guide
DLP
TM
Projector