Marantz VP-12S4 User Manual
Marantz VP-12S4 Manual
 |
View all Marantz VP-12S4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Marantz VP-12S4 manual content summary:
- Marantz VP-12S4 | User Manual - Page 1
Model VP-12S4 User Guide DLPTM Projector ENGLISH - Marantz VP-12S4 | User Manual - Page 2
Changes replacement used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing manufacturer's instructions have - Marantz VP-12S4 | User Manual - Page 3
gas inside the lamp bulb that contains mercury vapor may be emitted from the projector's vent. Before use, carefully read the projector user guide and the lamp replacement instructions. Remember to handle the lamp with care. In the event of serious trouble, call for Marantz authorized dealer. • Do - Marantz VP-12S4 | User Manual - Page 4
de service d'une lampe varie aussi en fonction de la lampe, guide de l'utilisateur du projecteur et les instructions de remplacement de la lampe. Pensez à manipuler la lampe avec précautions. En cas de problème sérieux, contactez un distributeur agréé Marantz. • Ne regardez pas directement la lampe - Marantz VP-12S4 | User Manual - Page 5
de la unidad. - Cuando el proyector se monte en el techo deberá utilizarse para la instalación el juego de montaje en el techo aprobado por MARANTZ. - No mira al objetivo cuando el proyector esté encendido. Podría lesionarse la vista. - Desenchufe el proyector de la toma de corriente si no lo va - Marantz VP-12S4 | User Manual - Page 6
for montado no tecto, o Kit de Montagem no Tecto aprovado pela MARANTZ deverá ser utilizado para a instalação. - Não olhe para dentro da lente quando o projector é activado. Isto pode danificar a visão. - Desligue o projector da tomada de parede se este não estiver para ser utilizado durante alguns - Marantz VP-12S4 | User Manual - Page 7
Lamp Replacement 2 Caution Concerning the Lamp Unit 2 Caution Concerning the Setup of the Projector 2 Notes on Operation ...2 FEATURES...3 ACCESSORIES ...3 PROJECTOR LAYOUT AND FUNCTIONAL OVERVIEW 4 Front and Top View...4 Rear and Terminals View 5 Bottom View ...5 Remote Controller ...6 Remote - Marantz VP-12S4 | User Manual - Page 8
the Lamp Replacement There is potential glass particle hazard if the lamp ruptures. Caution Concerning the Setup of the Projector For minimal servicing and to maintain high image quality, avoid humidity, dust and cigarette smoke. When the projector is subjected to these environments,the lens and - Marantz VP-12S4 | User Manual - Page 9
and fan speed control • Highly rigid die-cast chassis to minimize radiating noise • 2000 hr long-life 200W SHP lamp with double-shielded safety structure STANDBY ON PATTERN I V-MUTE MENU ENTER INPUT ASPECT COMP. THEATER FULL F • Lens Cap x 1 • Remote Controller x 1 • AA Size Batteries - Marantz VP-12S4 | User Manual - Page 10
usage hours. We are trying our best to control the quality in order to reduce lamp failures. It is almost impossible to have zero failure, even using the most advanced technology. This is not a problem only for Marantz, but all projector manufactures. Therefore we have to note that the warranty does - Marantz VP-12S4 | User Manual - Page 11
another Marantz audio component using a supplied System Control cable, you can remotely operate the components as a single system. • When connecting to component with a remote sensor (such as the SR9500,SR8500), be sure to connect the "REMOTE CONTROL IN" jack of this projector to the "REMOTE CONTROL - Marantz VP-12S4 | User Manual - Page 12
VIDEO DYNAMIC ZOOM S DYN Z ™1 k VIDEO V USER THROUGH 1-3 T ™2 RGB CINEMA l RGB 4-6 ™3 HDMI BLANK ¡0 1 7-9 ™4 INFO. LIGHT ¡1 2 i ™5 ¡2 REMOTE CONTROLLER RC -12VPS4 ™6 ™7 ¡3 ™8 ™9 ¡4 a STANDBY button ( P.16) Turn the projector designed for high fidelity black - Marantz VP-12S4 | User Manual - Page 13
the remote control unit for a long period of time. • If the batteries should leak, carefully wipe off the fluid from the inside of the battery compartment, then insert new batteries. • When disposing of used batteries, please comply with governmental regulations or environmental public instruction - Marantz VP-12S4 | User Manual - Page 14
lead to trouble and damage. ❖ When pulling out a cable: • Be sure to grab the plug, not the cable itself. Connection with AC Power Supply Connection with Video Equipments You can connect this projector to a VCR, DVD player and other video equipment. Connecting a video source using S-VIDEO IN and - Marantz VP-12S4 | User Manual - Page 15
above is not followed, projected image may corrupt. For the details of the HDMI terminal on the device connected with the unit, see the instruction manual of the device. You can control total home theater system using PC or Marantz receiver equipment. For installing below system, consult with - Marantz VP-12S4 | User Manual - Page 16
ON button on the remote controller or the The ON indicator lights up. / I button on the projector. STANDBY ON PATTERN V- Changing the Focus Pattern Color According to Lens Position ( P.14) The focus pattern changes color depending on the lens position. There are two colors and they can be used - Marantz VP-12S4 | User Manual - Page 17
to clockwise : The image goes up. Counterclockwise Up ❖ Turn the Lens Shift knob to counterclockwise : The image goes down. Clockwise Down Adjusting the Height You can position the projected image by changing the height of the projector's adjusters. 1. Move the adjuster lever to the left or right - Marantz VP-12S4 | User Manual - Page 18
installing level to light axis Screen lower end Projection distance lens head ❖ Mounting on the ceiling Screen Screen upper end Range from light distance lens head CAUTION - For ceiling installation, consult with Marantz authorized dealer. - Do not look into the lens when the projector is - Marantz VP-12S4 | User Manual - Page 19
Height Screen Height Screen ENGLISH Screen Size and Projection Distance (inch) VP-12S4 Screen size (Diagonal) Screen Size and Projection Distance (mm) VP-12S4 Screen size (Diagonal) Height Height VP-12S1 Projection distance ❖ 16 : 9 Screen In case of displaying the 16:9 picture on the whole of - Marantz VP-12S4 | User Manual - Page 20
the need for a mounting pole. For the VP-12S4 the projector can be mounted 15% of the height of the screen(=0.15H)* above the top of the viewable portion. For extended mounting conditions, the lens can be shifted even farther (170% → 200%). However if these values are used, optical performance may - Marantz VP-12S4 | User Manual - Page 21
projector. Pressing the INPUT button on the projector or remote control rotates the input signal in the order of COMPONENT1 ➔ COMPONENT2 ➔ S-VIDEO ➔ VIDEO ➔ RGB ➔ HDMI 1 ➔ HDMI 4 kinds of ASPECT mode using remote controller. Pressing the ASPECT button on the remote control rotates the aspect ratio in - Marantz VP-12S4 | User Manual - Page 22
FULL button on the remote controller for 16:9 aspect ratio video source, such as 1080i, 1035i, and 720p video systems. • Press the FULL button on the remote controller for the squeezed video source. 1. Press the STANDBY button on the remote controller or the / I button on the projector. 2. The fan - Marantz VP-12S4 | User Manual - Page 23
/ Off* Black Level 0 IRE* / 7.5 IRE During HDMI input, "Normal" or "Expand" is shown. FRC Auto 1080i 1080p S-Video Video RGB HDMI1 CB CR Main Menu RGB/HD Adjust P.21 Display P.22 Trigger 2 Zoom Trigger 2 Through Remote Control Color Temp. Calibration Reset Lamp Life Reset All Enable / Disable - Marantz VP-12S4 | User Manual - Page 24
Picture mode: selecting a mode from the MENU screen or pressing the picture mode buttons (THEATER, STANDARD, DYNAMIC or USER) on the remote controller. To use the remote controller buttons to select a picture mode, make sure the MENU screen does not appear on the screen and press the desired picture - Marantz VP-12S4 | User Manual - Page 25
HD Adjust Display OSD/Blanking Config. Gamma Contrast Brightness Color Tint Color Temp. Lamp lens aperture. F5.0: Use to prioritize contrast. F3.0: Use to prioritize brightness. Full, Normal, Zoom, Through - Gamma setting To change K. HB : High Bright : Display brightest input, HDMI input or PAL - Marantz VP-12S4 | User Manual - Page 26
Adjust Fine Menu 1 Fine Menu 2 Input Signal RGB/HD Adjust Display OSD/Blanking Config. Cinema VCR Mode Black projector is used with external field memories and operates in the full set of deinterlacing modes, i.e., motion adaptive video deinterlacing and full frame film source deinterlacing using - Marantz VP-12S4 | User Manual - Page 27
analog broadcasting used mainly in France and Russia. : Standard digital broadcasting : Special digital broadcasting (for example: RCA DTC100) 576p : Standard digital broadcasting 720p, 1080p : High Definition digital broadcasting 1035i : Japanese "Hi-Vision" broadcasting RGB/HD Adjust - Marantz VP-12S4 | User Manual - Page 28
, Picture Mode, Aspect ratio or other setting is changed. Disable: Does not display Status Info. - Power-OFF Confirm. Disable: Directly puts the projector on standby without displaying the confirmation message when power is shut off from the button on the remote controller or the /I button on the - Marantz VP-12S4 | User Manual - Page 29
either Marantz's AV components connected to the REMOTE CONTROL IN/OUT terminals or a PC or other device connected to the RS232C terminal of the projector. The included remote controller cannot be used in this case. When this item is selected, a confirmation message appears asking whether to change - Marantz VP-12S4 | User Manual - Page 30
OFF. Promptly replace the lamp with a new one. ( P.24 "Replacing Lamp Unit") 2. Once the lamp has been replaced, press the ON button on the remote control or the / I button on the projector. The below message appears on the screen for 120 seconds. New Lamp ? Yes No 3. Select "Yes", using the - Marantz VP-12S4 | User Manual - Page 31
OR ATTEMPT TO SERVICE WITHOUT REMOVING COVER COMPLETELY. CAUTION : HIGH PRESSURE LAMP CAUTION HOT : UNPLUG MAY EXPLODED IF IMPROPERLY HANDLED. THE POWER CORD AND WAIT REFER SERVICING TO QUALIFIED SERVICE 60 MINUTES BEFORE CHARGING PERSONNEL. THE LAMP. MODEL NO. VP-16S1 / U1M AC 120V 60HZ - Marantz VP-12S4 | User Manual - Page 32
replacing the lamp or in other cases where the lighting changes, color temperature can be adjusted using is detached from the lens, the below message appears projector goes on standby. As usual, activate power by pressing either the ON button on the remote control or the / I button on the projector - Marantz VP-12S4 | User Manual - Page 33
) Set the lens shift knob to the correct (center) position by taking the correct procedures. ( P.26) Notes: • If the lamp still does not function after the replacement and initialization of the lamp life, contact a Marantz authorized dealer, or service center. • This projector uses a microcomputer - Marantz VP-12S4 | User Manual - Page 34
has failed, or the lamp is completely worn out. Projector internal temperature is higher than the allowed level. Trouble has occurred with the fan. Color temperature adjustment failed. Internal program error Recommendation Close the cover correctly. Replace the lamp and reset lamp life. Check if - Marantz VP-12S4 | User Manual - Page 35
-3.58/PAL-4.43/SECAM S-Video COMPONENT IN 3RCA x 2 Y, CB/PB, CR/PR RGB/HD IN D-sub M 15 pin x 1 Analog RGB HD:1080i, 720p, 480p HDMI IN HDMI x 2 HDMI compliant (single link only) REMOTE Mini jack type x 1 CONTROLLER IN REMOTE Mini jack type x 1 CONTROLLER OUT AC IN 3 Prong Grounding - Marantz VP-12S4 | User Manual - Page 36
18 15/16 (480 - 481) STANDBY ON MENU INPUT WARRNING LAMP FOCUS ENTER DOWN LEFT UP LENS SHIFT RIGHT 7 3/16 (182.5) 3 1/4 ( 82.6) 8 image. The normal aspect ratio of a computer and video image is 4 : 3. There are also wide images more yellow/red) light. High color temperature implies a colder - Marantz VP-12S4 | User Manual - Page 37
.com You can find your nearest authorized distributor or dealer on our website. JAPAN U.S.A. EUROPE Marantz Japan, Inc. Marantz America, Inc. Marantz Europe B.V. 35-1 Sagami Ohno 7-Chome, Sagamihara-shi, Kanagawa 228-8505, Japan 1100 Maplewood Drive, Itasca, IL 60143, U.S.A. P.O. Box 8744, 5605
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
 |
 |
Model VP-12S4 User Guide
DLP
TM
Projector
ENGLISH