Maytag CWE5800ACE Installation Instructions
Maytag CWE5800ACE - Double Oven Manual
 |
UPC - 719881043029
View all Maytag CWE5800ACE manuals
Add to My Manuals
Save this manual to your list of manuals |
Maytag CWE5800ACE manual content summary:
- Maytag CWE5800ACE | Installation Instructions - Page 1
INSTALLATION INSTRUCTIONS 24" (61.0 CM) ELECTRIC SINGLE AND DOUBLE BUILT-IN OVEN Table of Contents BUILT-IN OVEN SAFETY 1 INSTALLATION REQUIREMENTS 2 Tools and Parts 2 Location Requirements 2 Electrical Requirements 3 INSTALLATION INSTRUCTIONS 4 Prepare Built-In Oven 4 Oven Door 4 Make - Maytag CWE5800ACE | Installation Instructions - Page 2
or electric drill (for wall cabinet installations) ■ 1" (25 mm) drill bit (for wall cabinet installations) ■ Level Parts needed ■ UL listed or CSA approved conduit connector ■ UL listed wire connectors Parts supplied ■ 0.188 x 2.1" screws - single oven (4), double oven (6) Check local codes. Check - Maytag CWE5800ACE | Installation Instructions - Page 3
cabinet door F. 45³⁄₈" (115.3 cm) cutout height Cabinet Side View - Double or Single Oven A B E C D A. 24"(61 cm) min. cutout depth B. 22⁵⁄₈" (57.5 cm) recessed oven depth C. Oven front D. Recessed oven E. Cabinet Electrical Requirements If codes permit and a separate ground wire is used, it - Maytag CWE5800ACE | Installation Instructions - Page 4
local codes and industry accepted wiring practices. INSTALLATION INSTRUCTIONS Prepare Built-In Oven 1. Decide on the final location for the oven. Locate existing wiring to avoid drilling into or severing wiring during installation. Remove Oven Door. IMPORTANT: Use both hands to remove oven doors - Maytag CWE5800ACE | Installation Instructions - Page 5
For Double Ovens Make Electrical Connection For Single Ovens WARNING WARNING Electrical Shock Hazard Disconnect power before servicing. Use 8 gauge solid copper wire. Electrically ground oven. Failure to follow these instructions can result in death, fire, or electrical shock. Electrical Shock - Maytag CWE5800ACE | Installation Instructions - Page 6
wire (H) from the oven cable to the green (or bare) ground wire (in the junction box) using a UL listed wire connector. 6. Install junction box cover. 3-Wire Cable from Home Power Supply - U.S. Only IMPORTANT: Use the 3-wire cable from home power supply where local codes permit a 3-wire connection - Maytag CWE5800ACE | Installation Instructions - Page 7
on the hinges. 8. Close door. 9. Repeat for lower oven door. 10. Reconnect power. 11. Display panel will light briefly, and "PF" should appear in the display. 12. If display panel does not light, please reference the "Assistance or Service" section of the Use and Care Guide or contact the dealer - Maytag CWE5800ACE | Installation Instructions - Page 8
Check that the oven door(s) is closed 3. Turn on the oven(s) Broil function. See the User Instructions for more information. If oven(s) does not operate, check the following: If you need Assistance or Service: Please reference the "Assistance or Service" section of the Use and Care Guide or contact
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
INSTALLATION INSTRUCTIONS
24" (61.0 CM) ELECTRIC SINGLE AND DOUBLE
BUILT-IN OVEN
BUILT-IN OVEN SAFETY
IMPORTANT:
Save for local electrical inspector's use.
W10203506A
Table of Contents
BUILT-IN OVEN SAFETY
...............................................................
1
INSTALLATION REQUIREMENTS
................................................
2
Tools and Parts
............................................................................
2
Location Requirements
...............................................................
2
Electrical Requirements
...............................................................
3
INSTALLATION INSTRUCTIONS
..................................................
4
Prepare Built-In Oven
..................................................................
4
Oven Door
....................................................................................
4
Make Electrical Connection
.........................................................
5
Install Oven
..................................................................................
7
Complete Installation
...................................................................
8
You can be killed or seriously injured if you don't immediately
You
can be killed or seriously injured if you don't follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING