Maytag MAH2400AWW Installation Instructions

Maytag MAH2400AWW - 2.4 cu. Ft. Compact Front Load Washer Manual

Maytag MAH2400AWW manual content summary:

  • Maytag MAH2400AWW | Installation Instructions - Page 1
    HIGH-EFFICIENCY WASHER INSTALLATION INSTRUCTIONS MACHINE À LAVER HAUTE EFFICACITÉ GUIDE DE MISE EN SERVICE INSTRUCCIONES PARA LA INSTALACIÓN DE LA LAVADORA DE ALTA EFICIENCIA LEAVE THESE INSTRUCTIONS WITH THE OWNER LAISSER CE GUIDE DE MISE EN SERVICE AU PROPRIÉTAIRE DEJAR ESTAS INSTRUCCIONES CON
  • Maytag MAH2400AWW | Installation Instructions - Page 2
    WASHER DIMENSIONS A. Height - Overall* B. Depth to Front of Control Dial C. Width D. Depth - With Washer Door Open 90° E. Depth INCH (CM) 33.25" (84.5) 26" (66.1) 23.5" (59.7) 41.25" (104.3) 24" (60.9) E Note: The height of the washer from top to floor is 33 1\4" this includes the leveling
  • Maytag MAH2400AWW | Installation Instructions - Page 3
    plug codes and ordinances. It is the personal responsibility and obligation of the appliance owner to provide adequate electrical service for this appliance. ADDITIONAL GROUNDING CONNECTIONS A grounding kit (Part No. 12001875) is available. It contains the ground wire, clamp, ground screw and washer
  • Maytag MAH2400AWW | Installation Instructions - Page 4
    move slightly during the spin cycle. Never install the washer on a platform or weakly supported structure. LOCATION CONSIDERATIONS It is recommended the washer never be installed in areas where water may freeze since the washer will always maintain some water in the water valve, pump and hose areas
  • Maytag MAH2400AWW | Installation Instructions - Page 5
    technical assistance or if your washer requires replacement parts or accessories, contact Maytag Customer Service, toll-free 1-888-4-Maytag for information on the nearest authorized Maytag Parts Distributor. Proper installation is the responsibility of the owner; Service Calls Performed As A Result
  • Maytag MAH2400AWW | Installation Instructions - Page 6
    The Washing Machine. These Instructions Should Be Retained For Future Reference. Remove The Door From All Discarded Appliances To Avoid The Danger Of A Child Suffocating. STEP 1 PREPARE WASHER Removing The Shipping Bolts Before using the washing machine, you must remove the five shipping bolts from
  • Maytag MAH2400AWW | Installation Instructions - Page 7
    Standpipe must be at least 18" high. NOTE: If drain standpipe is in excess of 5 feet above floor level, a drain hose extension kit ((PPartt ##1120012646820) will need to be installed. If drain standpipe is in excess of 10 feet above floor level, a pump accessory kit (Part #12001674) may need to be
  • Maytag MAH2400AWW | Installation Instructions - Page 8
    o Instruction and Installation Kit have been removed from tub. o Shipping bolts and spacers have been removed. o Washer is plugged into electrical outlet and is properly grounded. o Water hoses are connected to the faucets with inlet screens and washers. o Water is turned on and checked for leaks at
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8

HIGH-EFFICIENCY WASHER INSTALLATION INSTRUCTIONS
MACHINE À LAVER HAUTE EFFICACITÉ
GUIDE DE MISE EN SERVICE
INSTRUCCIONES PARA LA INSTALACIÓN
DE LA LAVADORA DE ALTA EFICIENCIA
LEAVE THESE INSTRUCTIONS WITH THE OWNER
LAISSER CE GUIDE DE MISE EN SERVICE AU PROPRIÉTAIRE
DEJAR ESTAS INSTRUCCIONES CON EL PROPIETARIO
2201459
(7/28/04 Revision)