Maytag MAH5500BWW Service Manual - Page 51

Timer, Removal

Get Maytag MAH5500BWW - Neptune Series 27'' Front-Load Washer PDF manuals and user guides View all Maytag MAH5500BWW manuals
Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

TIMER REMOVAL 1 . Disconnect power to the unit. 2 . Carefully lift the timer knob and dial off the timer shaft by pulling the knob away from the face of the control console (Figure 4-7). REPLACEMENT 1 . Align the three tabs of the timer into the slots of the console. 2 . Insert the timer into the slots and slightly lift the locking tab of the timer. Slide the timer away from the endcap until the locking tab can engage with the square hole in the console. 3. Replace mounting screw. Figure 4-7 3 . Disengage the console assembly from the top cover and roll forward (See Console Removal). 4. Remove timer mounting screw on back of timer in the console. 5 . Slightly lift the locking tab on the back of the timer (Figure 4-8). 6 . With the locking tab lifted, slide the timer body toward the end cap of the console. This will disengage the retaining tabs of the timer from the slots in the console. 7 . Lift the timer away from the console. Figure 4-8 16008373-01 © 1998 Maytag Corporation SECTION 4. CONSOLE 4-3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
© 1998 Maytag Corporation
16008373-01
SECTION 4.
CONSOLE
4-3
4-3
4-3
4-3
4-3
1 . Disconnect power to the unit.
Disconnect power to the unit.
Disconnect power to the unit.
Disconnect power to the unit.
Disconnect power to the unit.
2 . Carefully lift the timer knob and dial off
the timer shaft by pulling the knob away
from the face of the control console
(Figure 4-7).
(Figure 4-7).
(Figure 4-7).
(Figure 4-7).
(Figure 4-7).
3. Disengage the console assembly from
the top cover and roll forward
(See
(See
(See
(See
(See
Console Removal)
Console Removal)
Console Removal)
Console Removal)
Console Removal)
.
4. Remove timer mounting screw on back
of timer in the console.
5 . Slightly lift the locking tab on the back of
the timer
(Figure 4-8).
(Figure 4-8).
(Figure 4-8).
(Figure 4-8).
(Figure 4-8).
6. With the locking tab lifted, slide the timer
body toward the end cap of the console.
This will disengage the retaining tabs of
the timer from the slots in the console.
7. Lift the timer away from the console.
Figure 4-8
Figure 4-8
Figure 4-8
Figure 4-8
Figure 4-8
TIMER
REMOVAL
TIMER
REMOVAL
TIMER
REMOVAL
TIMER
REMOVAL
TIMER
REMOVAL
Figure 4-7
Figure 4-7
Figure 4-7
Figure 4-7
Figure 4-7
REPLACEMENT
REPLACEMENT
REPLACEMENT
REPLACEMENT
REPLACEMENT
1 . Align the three tabs of the timer into the
slots of the console.
2 . Insert the timer into the slots and
slightly lift the locking tab of the timer.
Slide the timer away from the endcap
until the locking tab can engage with the
square hole in the console.
3. Replace mounting screw.