Maytag MEDB700BW Dimension Guide
Maytag MEDB700BW Manual
 |
View all Maytag MEDB700BW manuals
Add to My Manuals
Save this manual to your list of manuals |
Maytag MEDB700BW manual content summary:
- Maytag MEDB700BW | Dimension Guide - Page 1
DRYER DIMENSIONS Models with riser Electric Dryer PRODUCT MODEL NUMBERS MEDB700B, MEDB725B MEDB880B, MEDB980B Models without riser Side view Bottom view: Back view Side view Back view NOTE: Most installations require a minimum of 5" (127 mm) clearance behind dryer and servicing. ■■ the dryer to - Maytag MEDB700BW | Dimension Guide - Page 2
electrical supply, if specified on the serial/rating plate) on a separate 30-amp circuit, fused on both sides of the line. A time-delay fuse or circuit breaker is recommended. Connect to an individual branch circuit. VENTING REQUIREMENTS Exhaust venting: Exhaust your dryer performance. Maytag Vent
-
1 -
2
 |
 |
Electric Dryer
PRODUCT MODEL NUMBERS
W10562335B
08/2013
MEDB700B, MEDB725B
MEDB880B, MEDB980B
Back view
Side view
Models with riser
DRYER DIMENSIONS
Models without riser
Back view
Side view
Bottom view:
NOTE:
Most installations require a minimum of 5" (127 mm)
clearance behind dryer for exhaust vent with elbow. See “Venting
Requirements.”
All dimensions show recommended spacing allowed,
with tested spacing of 0" (0 mm) clearance on sides
and rear.
■
Additional spacing should be considered for ease
of installation and servicing.
■
Additional clearances might be required for wall,
door, and floor moldings.
■
Additional spacing should be considered on all
sides of the dryer to reduce noise transfer.
■
For closet installation, with a door, minimum
ventilation openings in the top and bottom of the
door are required. Louvered doors with equivalent
ventilitation openings are acceptable.
■
Companion appliance spacing should also be
considered.
Spacing for recessed area or closet installation