Maytag MEDB850WR Dimension Guide
Maytag MEDB850WR - 7.3 cu. Ft. Capacity Electric Dryer Manual
 |
UPC - 883049179278
View all Maytag MEDB850WR manuals
Add to My Manuals
Save this manual to your list of manuals |
Maytag MEDB850WR manual content summary:
- Maytag MEDB850WR | Dimension Guide - Page 1
Spacing: NOTE: Most installations require a minimum of 5" (127 mm) clearance behind dryer for exhaust vent with elbow. See "Venting Requirements." Spacing for recessed area or closet installation All dimensions show recommended spacing allowed, with tested spacing of 0" (0 mm) clearance on sides - Maytag MEDB850WR | Dimension Guide - Page 2
The Vent System Chart provides venting requirements that will help achieve best drying performance. Maytag Vent System Chart Number of 90° elbows Type of vent Box/ without notice. Dimensions are for planning purposes only. For complete details, see Installation Instructions packed with
-
1 -
2
 |
 |
Electric Dryer
PRODUCT MODEL NUMBERS
Dryer with Extended back view:
Dryer with Flat back view:
Back view:
Recommended Installation Spacing:
W10388775
06/2011
MEDB200V, MEDB400V, MEDB700V,
MEDB800V, MEDB850W
Bottom view:
Spacing for recessed area or closet installation
All dimensions show recommended spacing allowed, with
tested spacing of 0” (0 mm) clearance on sides and rear.
■
Additional spacing should be considered for ease of
installation and servicing.
■
Additional clearances might be required for wall, door,
and floor moldings.
■
Additional spacing should be considered on all sides
of the dryer to reduce noise transfer.
■
For closet installation, with a door, minimum ventilation
openings in the top and bottom of the door are required.
Louvered doors with equivalent ventilitation openings are
acceptable.
■
Companion appliance spacing should also be considered.
NOTE:
Most installations require a minimum of 5" (127 mm)
clearance behind dryer for exhaust vent with elbow. See
“Venting Requirements.”