Maytag MFW2055FR Instruction Sheet

Maytag MFW2055FR Manual

Get Maytag MFW2055FR PDF manuals and user guides View all Maytag MFW2055FR manuals
Add to My Manuals
Save this manual to your list of manuals

Maytag MFW2055FR manual content summary:

  • Maytag MFW2055FR | Instruction Sheet - Page 1
    for Evaporator Wire Harness Kit Kit Contains: 1 Evaporator Wire Harness 1 Instruction Sheet WARNING Electrical Shock Hazard Disconnect power before servicing. Replace all parts and panels before operating. Failure to do so can result in death AKDE Fresh food evap thermistoroprlealeccetrmicael
  • Maytag MFW2055FR | Instruction Sheet - Page 2
    source de courant électrique avant l'entretien. Replacer pièces et panneaux avant de faire la remise en marche. Le non-respect de ces instructions peut AKDE Fresh food evap thermistocrapuslearcuenmdéecènstou un choc électrique. . Should be on suction line down on the evap 1. Débrancher le réfrig
  • 1
  • 2
Instruction Sheet W11191284 Rev A
10/17
Instruction Sheet
for Evaporator Wire Harness Kit
— 1 —
Kit Contains:
1.
Unplug refrigerator or disconnect power.
2.
Replace the evaporator wire harness, making sure the
thermistor is attached to the suction tubing coming directly
out of the evaporator. See
Figure 1
.
1
Evaporator Wire Harness
1
Instruction Sheet
IMPORTANT:
You may need to adjust the clamp on the thermistor
before installing. If the measurement is greater than ¼” you will
need to use a pair of slip pliers to gently squeeze the clamp to
the proper distance. Be sure not to crimp the thermistor while
closing the gap. See
Figure 2
.
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Failure to do so can result in death
or electrical shock.
Replace all parts and panels before
operating.
4.
Replace all parts and panels.
3.
Verify the thermistor is tight and in full contact with the suction
tubing directly coming out of the evaporator.
IMPORTANT:
There is a ridge from the tubing fitting. Make sure
you do not install the thermistor over this ridge. The tubing and
thermistor need to be in full contact. A zip tie is suggested to keep
the thermistor tight and secure as shown See
Figure 3
.
FIGURE 1
CORRECT
LOCATION
INCORRECT
LOCATION
FIGURE 2
© Whirlpool Corporation 2017
(All Rights Reserved)
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
5.
Plug in refrigerator or reconnect power.
FIGURE 3
RIDGE
SUCTION TUBE