Maytag MGDB725BW Dimension Guide - Page 1
Maytag MGDB725BW Manual
View all Maytag MGDB725BW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Gas Dryer PRODUCT MODEL NUMBERS MGDB700B, MGDB725B, MGDB880B, MGDB980B DRYER DIMENSIONS Models with riser Bottom view: Side view Models without riser Back view NOTE: Most installations require a minimum 5" (102 mm) clearance behind the dryer for the exhaust vent with elbow. See "Venting Requirements". Side view Back view Spacing for recessed area or closet installation All dimensions show recommended spacing allowed, with tested spacing of 0" (0 mm) clearance on sides and rear. ■■ Additional spacing should be considered for ease of installation and servicing. ■■ Additional clearances might be required for wall, door, and floor moldings. ■■ Additional spacing should be considered on all sides of the dryer to reduce noise transfer. ■■ For closet installation, with a door, minimum ventilation openings in the top and bottom of the door are required. Louvered doors with equivalent ventilitation openings are acceptable. ■■ Companion appliance spacing should also be considered. W10562336B 08/2013