Maytag MGDB850WR Dimension Guide

Maytag MGDB850WR - Bravos 7.3 cu. Ft. Gas Dryer Manual

Maytag MGDB850WR manual content summary:

  • Maytag MGDB850WR | Dimension Guide - Page 1
    Gas Dryer PRODUCT MODEL NUMBERS MGDB200V, MGDB400V, MGDB700V, MGDB800V, MGDB850W Dryer with extended back: Dryer with flat back: Back view: Bottom view: Recommended Installation Spacing: NOTE: Most installations require a minimum of 5" (127 mm) clearance behind dryer for exhaust vent with
  • Maytag MGDB850WR | Dimension Guide - Page 2
    gas must be used. An individual manual shutoff valve must be installed within 6 ft (1.8 m) of the dryer in accordance with the National Fuel Gas best 90° turns as possible. Maytag Vent System Chart Number Dimensions are for planning purposes only. For complete details, see Installation Instructions
  • 1
  • 2

Gas Dryer
PRODUCT MODEL NUMBERS
W10388777
06/2011
MGDB200V, MGDB400V, MGDB700V,
MGDB800V, MGDB850W
NOTE:
Most installations require a
minimum of 5" (127 mm) clearance
behind dryer for exhaust vent with
elbow. See “Venting Requirements”.
Dryer with extended back:
Dryer with flat back
:
Back view:
Bottom view:
Recommended Installation Spacing:
Spacing for recessed area or closet installation
All dimensions show recommended spacing allowed, with tested spacing of 0" (0 mm) clearance
on sides and rear.
Additional spacing should be considered for ease of installation and servicing.
Additional clearances might be required for wall, door, and floor moldings.
Additional spacing should be considered on all sides of the dryer to reduce noise transfer.
For closet installation, with a door, minimum ventilation openings in the top and bottom of the
door are required. Louvered doors with equivalent ventilitation openings are acceptable.
Companion appliance spacing should also be considered.