Maytag MVW5035MW Quick Start Guide

W11436568B

MAYTAG TOP LOADING WASHING MACHINE QUICK START GUIDE

WARNING:

To reduce the risk of fire, electric shock, or injury to persons,

read the IMPORTANT SAFETY INSTRUCTIONS, located in your

appliance’s Owner’s Manual, before operating this appliance.

Step 1.

ADD HE DETERGENT

Designed to use only HE (High

Efficiency) detergents.

NOTE:

See ADDING LAUNDRY

PRODUCTS (below) for more

information on adding HE detergent,

fabric softener, and/or bleach.

Step 3.

PRESS POWER TO

TURN ON THE

WASHER

Step 5.

ADJUST CYCLE

SETTINGS AND

SELECT ADDITIONAL

OPTIONS*

Step 2.

LOAD CLOTHES

For best results, load garments in loose

heaps evenly around the basket wall.

Step 4.

SELECT THE DESIRED

CYCLE FOR YOUR

LOAD*

Step 6.

PRESS AND HOLD

START/PAUSE TO

BEGIN CYCLE

NOTE:

Start button must be held for

1 second to start cycle. Once the status

lights are illuminated, release the start

button.

*Not all cycles, settings or options are available with all models.

ADDING LAUNDRY PRODUCTS

IMPORTANT:

Using non-HE detergent will likely result in longer cycle times

and reduced rinsing performance. It may also result in component

malfunction and, over time, buildup of mold or mildew. HE detergents should

be low-sudsing and quick-dispersing to produce the right amount of suds for

the best performance.

ADDING HE DETERGENT TO BASKET

Add a measured amount of HE detergent or single-

dose laundry packets into the basket. If using oxi-type

boosters, color-safe bleach, or fabric softener

crystals, add to the bottom of the washer basket

before adding clothes.

NOTE:

Follow the manufacturer’s instructions to

determine the amount of laundry products to use.

ADDING LIQUID CHLORINE BLEACH

Do not overfill, dilute, or use more than 1 cup

(236 mL). Do not use color-safe bleach or oxi

products in the same cycle with liquid chlorine bleach.

ADDING LIQUID FABRIC SOFTENER TO DISPENSER

Pour a measured amount of liquid fabric softener into

dispenser; always follow manufacturer’s directions for

correct amount of fabric softener based on your load

size. Dilute liquid fabric softener by filling the

dispenser with warm water until liquid reaches the

underside of the rim. See Max Fill line arrows.

NOTE:

When using fabric softener, always use the

Soil & Rinse knob to select a setting with ‘+Extra

Rinse.’ This will ensure that no fabric softener

remains on clothing after the cycle is finished.

CONTROL PANEL AND FEATURES

1

3

2

4

4

*Appearance may vary depending on model.

1.

POWER

Press to turn on/off or to stop/cancel a cycle.

2.

CYCLE KNOB

Turn knob to select desired cycle.

3.

START/PAUSE

Press and hold the Start/Pause button for 1 second until all status

lights are illuminated, then release to start cycle. Press during a

cycle to pause cycle and unlock lid.

NOTE:

If machine is spinning it may take longer to unlock lid.

4.

CYCLE MODIFIERS

(Not all modifiers are available on all

cycles)

TEMPERATURE

Turn knob to modify the cycle’s available temperatures (Tap Cold,

Cold, Cool, Warm, or Hot).

DEEP FILL

Use the Deep Fill knob to determine how much water you want to

add to your wash cycle. Set it to Auto for the machine to

automatically determine the optimal water level. Set it to Max for

the maximum allowable water level for that cycle. Higher water

levels can be used to reduce the likelihood of white residue on

dark clothing.

SOIL AND RINSE

Use this knob to choose the soil level as well as the number of

rinses desired. If using fabric softener, make sure to use the

two topmost settings which add an Extra Rinse to the cycle.

EXTRA POWER

Turn the Extra Power knob to On for a boost in cleaning

performance on any wash cycle.

NOTE:

If the washer detects an out-of-balance condition it may

pause and attempt and re-distribute the load. During this time

the Sense and Wash status indicators will both briefly

illuminate.

WARNING:

Do not wash water-resistant or water repellant-

type clothing. Failure to closely follow these instructions may

result in an abnormal vibrating and out-of-balance condition

that could result in physical injury, property damage, and/or

appliance damage.

CHOOSING THE RIGHT CYCLE

A cycle guide for your washer can be

found online at

www.maytag.com.

The

document will help identify which cycle

to choose for various load types as well

as the default cycle options. For

example we recommend using the

Normal cycle with Warm water for

cottons, linens and mixed-garment

loads.

PRE-TREATING BEFORE A WASH

CYCLE

■

Turn the cycle knob to

Water Faucet and press

and hold the Start Button

to turn on, press the Pause

button or Power button to

turn off.

■

Faucet will automatically shut off after 10 minutes or when

max water level is reached.

■

Water will automatically drain if water level becomes too

high. Water will also drain after 10 minutes if the lid is left

open or 3 hours if the lid is left closed.

MORE WATER WHEN YOU WANT IT

AUTO SENSING AND DEEP FILL

■

When you select Deep Fill-Auto, the washer

will adjust the water level to the optimal

amount for a High Efficiency wash of the

detected load size.

■

Select Deep Fill - Med, High or Max to

automatically add more water to your wash

cycle.

■

It is recommended to use Bulky Items cycle with Deep Fill - Max

option for loads where maximum water level is desired.

■

Expect longer cycle times due to extended fill duration when using

the Deep Fill options besides Auto.

CLEANING WITH LESS WATER

The washer has been designed and

optimized to provide a thorough cleaning

using less water to conserve energy and

resources.

As the washer dampens and moves the

load, the level of the items will settle in the

basket. This is normal, and does not

indicate that more items should be added.

IMPORTANT:

You will not see a full basket of water as with

older, less efficient washing machines. It is normal for some of

the load to be above the water line.

For detailed installation instruction and maintenance information, winter storage, and transportation tips, please see the Owner’s Manual

included with your machine.

ASSISTANCE OR SERVICE AND ADDITIONAL INFORMATION

For information on any of the following items, a full cycle guide, warranty, detailed product dimensions, or for complete instructions for

use and installation, please visit

https://www.maytag.com/owners

or in Canada

https://www.maytag.ca/owners.

This may save you

the cost of a service call.

Register

Product

Schedule

Service

How To’s &

FAQ

Manuals &

Downloads

Add Service

Plan

Parts

Accessories

Model & Serial

Number Tag

location

To speak with a customer service representative or if you have additional questions, call us toll

free at

1–800–344–1274

or in Canada call

1–800–688–2002

.

You can write with any questions or concerns at:

United States:

Maytag Brand Appliances

Customer eXperience Center

553 Benson Road

Benton Harbor, MI 49022–2692

Canada:

Maytag Brand Appliances

Customer eXperience Centre

200–6750 Century Ave.

Mississauga, Ontario L5N 0B7

Please include a daytime phone number in your correspondence.

OPERATING

INSTRUCTIONS

WARNING

Fire Hazard

Never place items in the washer that are dampened

with gasoline or other flammable fluids.

No washer can completely remove oil.

Do not dry anything that has ever had any type of

oil on it (including cooking oils).

Doing so can result in death, explosion, or fire.

NOTE:

The

Extra

Power

option

will

increase

the

duration

of

the

cycle.

Maytag MVW5035MW Quick Start Guide

Maytag MVW5035MW Manual

Maytag MVW5035MW manual content summary: