Maytag MVWB725BW Dimension Guide
Maytag MVWB725BW Manual
 |
View all Maytag MVWB725BW manuals
Add to My Manuals
Save this manual to your list of manuals |
Maytag MVWB725BW manual content summary:
- Maytag MVWB725BW | Dimension Guide - Page 1
The dimensions shown below are the recommended spacing for this washer. ■■ Additional spacing should be considered for ease of installation and servicing. ■■ Additional clearances might be required for wall, door, floor moldings, and dryer venting. ■■ Additional spacing of 1" (25 mm) on all sides of - Maytag MVWB725BW | Dimension Guide - Page 2
only this appliance be provided. DRAIN SYSTEM Drain system can be installed using a floor washer. If you must install higher than 96" (2.44 m), you will need a sump pump system. Wall standpipe drain system Floor drain system requires a Siphon Break Kit (Part Number 285834), 2 Connector Kits (Part
-
1 -
2
 |
 |
PRODUCT MODEL NUMBERS
Installation spacing for recessed area or closet installation
The dimensions shown below are the recommended spacing
for this washer.
■
Additional spacing should be considered for ease of installation and servicing.
■
Additional clearances might be required for wall, door, floor moldings, and dryer venting.
■
Additional spacing of 1" (25 mm) on all sides of the dryer is recommended to reduce noise transfer.
■
For closet installation, with a door, minimum ventilation openings in the top and bottom of the door are
required. Louvered doors with equivalent ventilation openings are acceptable. Companion appliance
spacing should also be considered.
W10196566B1
08/2013
MVWB700B, MVWB725B
Front-Loading Washer
Washer Dimensions:
Spacing for recessed area or closet installation
17"
(432 mm)
5"
(126 mm)
14" max.
(356 mm)
3"
(76 mm)
3"
(76 mm)
24 in.
2
(155 cm
2
)
48 in.
2
(310 cm
2
)
1"
(25 mm)
1"
(25 mm)
44"
(1118 mm)
27.5"
(698 mm)
27.5"
(698 mm)