Miele B 3847 FashionMaster Operating instructions/Installation instructions
Miele B 3847 FashionMaster Manual
View all Miele B 3847 FashionMaster manuals
Add to My Manuals
Save this manual to your list of manuals |
Miele B 3847 FashionMaster manual content summary:
- Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 1
Operating Instructions Steam Ironing System To prevent accidents and appliance damage, read these instructions before installation or use. en-US,CA M.-Nr. 10 462 411 - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 2
household waste and follow local regulations on proper disposal. Consult with local authorities, dealers or Miele in order to dispose of and recycle electrical and electronic appliances. Miele assumes no responsibility for deleting any personal data left on the appliance being disposed. Please - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 3
24 Determining the water hardness 24 Using the test strips to determine the water hardness 24 Before using for the first time 25 Switch on the steam ironing system 25 Language setting 25 Setting the water hardness level 26 The steam ironing system is now set up for use 27 Switching - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 4
board at its lowest working height 44 Folding the ironing board 45 Disconnecting the steam hose 46 Storing the iron ...46 Storing the steamer 46 Emptying the water container 47 Storing the steam ironing system 47 Cleaning and care 48 Automatic rinsing 48 Preparing for the rinsing process - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 5
64 Accessories ...64 Non-stick soleplate 64 Ironing board cover 64 Steamer ...65 Care products...65 Descaling tablets for the steam ironing system 65 Frequently asked questions 66 Problem solving guide 67 Display messages 72 Technical service 76 Warranty ...76 Electrical connection 77 - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 6
environments. The steam ironing system must be used only for ironing textiles which are suitable for ironing according to the care label. The steam ironing system is intended for domestic use only as de- scribed in these operating instructions. Any other use is not permitted. Miele cannot be - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 7
IMPORTANT SAFETY INSTRUCTIONS Safety with children Children must be kept away from the appliance unless they are supervised. Children must be supervised in the vicinity of the steam ironing system. Do not allow children to play with it. Make sure that children cannot access the steam hose or - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 8
fitted by a Miele authorized service technician or the Miele service department. Do not use the steam ironing system if the ironing board cover is damaged. A damaged ironing board cover could be dangerous! Do not use the steam ironing system without an ironing board cover. The ironing board cover - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 9
IMPORTANT SAFETY INSTRUCTIONS The electrical safety of this steam ironing system can only be guaranteed if it is grounded properly. It is essential that this standard safety requirement is met. If in any doubt, please have building's wiring system inspected by a qualified electrician. Miele cannot - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 10
INSTRUCTIONS The steam ironing system must not be used in a non-stationary lo- cation (e.g. on a ship). Correct use Emitted steam, the iron soleplate and the areas surrounding it on the iron and the steamer jets are very hot. Danger of injury by burning! Avoid direct contact with it. The steam - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 11
INSTRUCTIONS Do not use solely demineralized water (e.g. distilled, battery wa- ter) to fill the water container. This could cause the steam ironing system to malfunction. Always place the iron with its soleplate horizontally on the resting surface of the steam ironing system. Ensure the steam - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 12
SAFETY INSTRUCTIONS Do not use the residual water container to store accessories or similar items. The residual water container should be used only to collect residual water. Do not plug any objects into the apertures on the steam ironing system. If an aperture is blocked, do not use the system - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 13
IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS 13 - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 14
compartment (lower) For the power cord, the steamer*, the non-stick soleplate, and the holder for the power cord. m Wheels n Release handle To setup the steam ironing system. * Standard equipment for steam ironing system B 3847. Available as optional accessory for steam ironing system B 3312. 14 - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 15
Product description Tower a Rotary dial for height adjustment and dismantling the appliance b Iron resting surface c Steam connection Tower (top view) with open storage compartment (top) d Steam hose holders e Control panel f Steam hose holder g Iron with steam hose 15 - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 16
the or arrow button to read them in full. Control panel on tower h On/Off button Switches the steam ironing system on or off. i Display Displays messages and instructions for the user. j Arrow button Lights up if additional options are provided or the display text exceeds the specified - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 17
across an even surface when folded up. Transport Two people are required for carrying the steam ironing system up or down stairs. When doing so, ensure the ironing board is at the bottom. Hold the steam ironing system by its handle and tip it gently towards you until the wheels are free to - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 18
O N * Assembly Take the steam ironing system to its set up location. Use one hand to pull the release mechanism upwards. This releases the locking mechanism of the ironing board and the X-frame folds down. Use both hands to pull the ironing board upwards into a horizontal position until this - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 19
. The maximum working height is 40 ¼" (102 cm). When adjusting the height, ensure the power cord does not become trapped in the mechanism. The steam ironing system is now assembled. This is its lowest working position of approx. 32 ¾" (83 cm) high. Use one of the rotary dials located on the - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 20
same time, pull the handle on the tower upwards with the other hand up or press the handle down. Do not push down on the ironing board while adjusting the height! Always use the handle on the tower to do this. When you have reached your desired working height, release the - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 21
* I N S T A L L A T I O N * Plug in the power cord The steam ironing system is designed for the connection to a properly installed grounded socket for AC 120 V, 15 A, 60 Hz. Connection Guide the power cord through the groove in the cover. Close the (lower) storage compartment. Open the ( - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 22
L A T I O N * Connection Removing the iron and the steam hose holder The steam ironing system is suitable for right- or left-handed people. The operation is optimized for both sides. Connecting the steam hose Lift the lid of the steam connection. Open the lid of the storage compartment (upper - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 23
off, the following message will appear in the display Release stm. button. To do this, unlock the button by pushing the slider on the iron forward (see "Ironing"). Condensation can form on the resting surface. However, this does not affect the functioning of the steam ironing system. 23 - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 24
the test strips to determine the water hardness Determining the water hardness To ensure the steam ironing system will function hardness so that you can provide the service technician with this information in the event of any service calls. Please note your water hardness level here gpg dH) 24 - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 25
using for the first time The following steps must be carried out before using the appliance for the first time: Switch on the steam ironing system Language setting english (GB) Use the arrow buttons or to select your preferred language setting. Press the button on the control panel on - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 26
option to set the water hardness level from 1-10. Use the following table to determine the water hardness level that must be set for your steam ironing system: Use the arrow buttons or on the control panel to set the water hardness level for your household. Tip: If the water hardness is - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 27
complete will appear in the display. Confirm this message by pressing the OK button. The steam ironing system will normally run a rinse cycle automatically after it has been set up for use. The steam ironing system can then be switched off or you can continue using it. When using the appliance for - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 28
"). The message PreHeating phase then appears on the display. The steam ironing system starts to heat up. During the heat-up phase, some steam may be discharged from the iron. As soon as the steam ironing system is ready and steam is available, the message Ready will be displayed. Depending on - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 29
: The dripping can be prevented by removing the water container slowly. The water container can be removed and refilled at any time (even during the ironing process). The amount of water required will depend on how much - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 30
water mixed at a 1:1 ratio with distilled water. This halves the water hardness. Set the halved water hardness to the corresponding level of the steam ironing system (see "Setting the water hardness"). If your tap water has a water hardness of 63 gpg (60 °dH), the mixing ratio of 1:1 with distilled - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 31
The temperature level Delicate/Synthetic indicates a soleplate temperature that is too low to iron with steam. If you use this temperature level, do not use the steam button. Otherwise, water will escape from the steam nozzles. Tip: Sort your laundry according to the heat sensitivity of the fabric - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 32
(on the garment) Low temperature Ironing with steam for best re- Ironing without steam sults (Material / Temperature setting) (Material / Temperature setting) With non-stick soleplate (see "Ironing with non-stick iron soleplate") Minimum iron, synthetics, appliqués, prints, flocking, etc - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 33
length of time the heating was switched off. When the steam ironing system is ready and steam is available, the message Ready will be shown in the display on the tower. Do not leave the steam ironing system unattended with the iron or steamer connected! Always remove the plug from the socket - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 34
Steam ironing system B 3312: Steam ironing system B 3847: a "Steam" button b Slider for constant steam c "Suction" button d "Inflation function" button a "Steam" button b Slider for constant steam c "Power output" button d "Inflation/suction button" Irons supplied with previous Miele - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 35
Ironing Ironing with steam The steam of your ironing system is ready to be used if the Ready is shown in the display. The burst of steam is controlled by the button. When pressing the button, the fan on the underside of the ironing board starts automatically. When the button is released, - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 36
Ironing Ironing without steam Remove the water container from the steam ironing system if you would like to iron without steam. This will not heat the steam generator, which also saves energy at the same time. Attaching the non-stick soleplate Place the tip of the iron inside the non-stick - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 37
-stick soleplate. Active iron board The steam ironing system uses a fan that sucks away the steam or uses the inflation function to inflate the ironing board for optimum positioning while ironing garments. The , or , buttons on the iron control the fan in the ironing board. Suction function - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 38
saves the fan direction and the power setting used last with your steam ironing system. When you use the appliance the next time, you do not need to set it again. Fan control for the B 3847: Heated ironing surface When the iron is connected and the appliance is switched on, the surface of the - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 39
Steamer The B 3847 steam ironing system is equipped with a steamer in addition to the iron. The steamer is available as an optional accessory for the B 3312 steam ironing system. Connecting the steamer You can also plug the steamer into the steam connection of the ironing system as an alternative - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 40
an alternative to the steamer. You do not need to switch off the steam ironing system to do this. After switching between the iron and the steamer, there is a short interval before the steam is ready. This ensures that sufficient steam is available. The steamer is ready when the message Ready is - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 41
the button. Then release the button again. Using steam Press the button. Keep the button depressed. Stopping the continuous steam function Release the button again. If you take a break from ironing, condensate may collect in the steam hose. When pressing the button, the condensate is - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 42
the fabric while the brush attachment is in place. Always try it first on an inconspicuous part of the fabric. Connecting the brush attachment Guide the brush attachment into the notches on the opposite side. Press the brush attachment against the steamer until the lugs snap into the notches - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 43
and are available for the next time you switch on the steam ironing system. Storage compartment (lower) Place the iron on the resting surface until it is cooled down. The steam ironing system can be dismantled while the iron is cooling down (see "Dismantling"). Unplug the power cord from the - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 44
board at its lowest working height To dismantle the steam ironing system, the ironing board must first be placed at its lowest working height. Make sure you do not trap the power cord in the system. Ensure the residual water container is completely emptied, pushed in and locked in place. Keep - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 45
end until it is upright and locks into position on the tower. Push the protruding end of the Xframe onto the ironing board until the frame locks into place. Guide the ironing board downwards or allow it to slide down by itself. The ironing board will remain in this position by itself. 45 - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 46
direct contact with it. Allow the iron to cool down after use. Never stow the iron away while it is still attached to the steam connection. Place the iron on the resting surface on the tower and let the iron cool down. Store the iron and the steam hose holder in the (upper) storage compartment - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 47
Emptying the water container Empty the water container if the steam ironing system will not be used for a long period of time. Dismantling Storing the steam ironing system Remove the water container (see "Filling the water container"). Make sure the water container is completely emptied. - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 48
be emptied. The residual water container can be removed from the tower when the steam ironing system is set at its highest working level. The iron cannot be used while the rinsing process is in progress. The steam ironing system can only be used again once the automatic rinsing process is completed - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 49
for example, could damage the steam ironing system. Moreover, the descaling effect required could not be guaranteed. You will need 1 descaling tablet for each descaling process. Miele descaling tablets are available to order from Miele or the Miele website. (see "Optional accessories"). The - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 50
You can interrupt the descaling process by switching the steam ironing system off with the button. When you turn the system back on, descaling will start again from the point where the process was interrupted. The messages in the display will guide you through the descaling process. The entire - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 51
process early Ready With the steam ironing system switched on, press the button on the control panel. The settings menu will be displayed. Use the arrow buttons to select individual settings. Descaling process The following display messages will guide you through the entire descaling process - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 52
Cleaning and care Fill water container to mark Add descaler Turn the twist lock on the rear of the water container counterclockwise and remove the twist lock. Hold the water container by its handle. Pull the handle down. The water container is released from the retainer. Pull the water - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 53
is removed from the tower unprompted, the message Insert or refill the water container will appear. During the descaling process, water is pumped into the steam generator at various times and is drained back again into the residual water container. Some - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 54
to its highest working position in order to remove the residual water container (see "Height adjustment"). Pre-rinse If the steam ironing system is still from the previous use, the cool down phase will start first. This may take up to 3 hours. The pre-rinse phase then follows ( - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 55
Cleaning and care Rinse water container and fill to the mark Pull the residual water container out of the tower. As long as the water container is not inserted into the tower, the display will show the following message Insert water cont.. Open the twist lock. Rinse the water container - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 56
period of approx. 1 hour, the descaling solution is drained from the steam generator into the residual water container. The steam generator is then rinsed with water. This rinse cycle takes approx. 5 minutes display. Press the OK button. The soleplate of the iron must then be rinsed. 56 - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 57
deposits that have built up. As soon as there is only steam coming out, you can release the button. Plug the steam hose of the iron into the steam connection on the tower (see "Connecting the steam hose"). If the steam ironing system is switched off, switch it on now by pressing the button - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 58
button briefly 2-3 times in the process. The descaling process is now complete. The steam ironing system can now be switched off or used. Cleaning the soleplate of the iron The soleplate of the iron remains hot after ironing. Danger of injury by burning! Remove the plug from the socket and let - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 59
board cover is soiled, you can wash and dry it. If the ironing board cover is damaged, it must be replaced before using the steam ironing system again. When removing the ironing board cover, always ensure the steam ironing system is switched off and the power cord is removed from the wall socket - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 60
to the middle. Push the fastener back into the cavity at the tip of the ironing board. Cleaning the water filter The water filter prevents foreign objects in the water from entering the steam ironing system and causing damage. The water filter can be cleaned if it is dirty or clogged. You - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 61
Removing the water filter cover Cleaning and care Removing the sealing ring Use a Phillips-head screwdriver to remove the screw of the water filter cover. Pull the water filter cover upwards. The water filter must be taken out of the right hand socket for cleaning. There is a hook and a round - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 62
Cleaning and care Pull out water filter Inserting the water filter Position the water filter with the small seal facing downwards. Press the water filter fully into the right-hand socket. Then replace the seal in the righthand socket. The side with the ridge must face downwards. Push the - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 63
the re- tainer in the tower. The steam ironing system is now ready for use again. If the water filter is not inserted, the steam ironing system will not work. The water filter must be replaced if it is worn or damaged. Replacement filters are available from your Miele retailer or Miele Service. 63 - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 64
also reduces or eliminates the formation of shiny patches on dark textiles. The non-stick soleplate can be used with all Miele steam ironing system irons. Ironing board cover Miele ironing board covers are very durable and highly water-absorbent. The separate needle felt under the separate pad is - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 65
. It comes with a removable brush attachment for lifting the fibers. The steamer can be used with any Miele steam ironing system, regardless of model. Care products The Miele care product range has been developed specially to clean your appliance thoroughly and gently. Descaling tablets for the - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 66
Most faults can be resolved by yourself. In many cases this will save you time and money because you won't need to book a service technician. The following guide should help you to find the reason for a fault, and to correct it. Please note: Repair work to electrical appliances must only be - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 67
Problem solving guide Problem Possible cause and solution The steam ironing sys- The appliance does not have any power. tem cannot be switched Check whether on. - the plug is inserted into the wall socket. - the fuse in your fuse panel is OK. After a power outage, the steam ironing system - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 68
far as possible (). Then let go of the rotary dial on the side and sub- sequently release the unlocking button on the tower. Now the ironing board can either be folded away or brought into its working position. If the ironing board still will not lock into place, contact Miele service. 68 - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 69
in the following pages (see "Display messages"). The steam ironing system is damaged. Contact Miele Service. The ironing board does not heat up. Steam has not been used for a while. Press the steam button . This will activate the ironing board's heating system. The steamer is attached to the - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 70
board cover and allow it to dry. Put the dry ironing board cover back on (see "Cleaning or replacing the ironing board cover"). If the ironing cover gets damp again, contact Miele Service. Water is leaking from the steam ironing system at the height of the water container when it is being moved - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 71
Problem The steam function on the iron or the steamer is not working. When using the steam button on the iron, drops of water or deposits escape from the steam nozzles. Possible cause and solution The steam ironing system no steam, contact Miele service. The temperature selected on the iron is - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 72
the fault message continues to be displayed, contact Miele Service. Memory fault Switch Off/On There is a fault with the steam ironing system. Press the button to switch the steam ironing system off and then back on again. The steam ironing system must now be reset. Complete the steps - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 73
the steam ironing system off and then back on again. If the fault continues to be displayed, contact Miele Service. The steam generator is contaminated with water containing too much limescale or salt. Start a descaling process (see "Starting the descaling process early"). To avoid this problem - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 74
steam ironing system. Press the button to switch the steam ironing system off and then back on again. If the fault continues to be displayed, contact Miele Service. Release stm. button The iron button to switch the steam ironing system back on and follow the instructions shown in the display - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 75
asked questions Possible cause and solution There is an internal fault. Press the button to switch the steam ironing system off and then back on again. The steam ironing system will try and rectify the fault itself. If the fault code continues to be displayed, contact Miele Service. 75 - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 76
Warranty For further information, please refer to your warranty booklet. The telephone number for Miele is listed at the back of these instructions. Technical service requires the model and serial number of your appliance. The information can be found on the data plate which is located on the - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 77
concerning the electrical connection of this appliance to your power supply, please consult a licensed electrician or contact Miele's Technical Service Department. Do not connect the steam ironing system to an off-grid inverter. These devices are used for autonomous power supply, e.g. a solar power - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 78
Connection voltage Power rating Fuse rating Steam pressure for B 3312 Steam pressure for B 3847 Steam output Capacity of water container Length of power cord Length of steam hose Height of ironing board Length of ironing board Width of ironing board Test certificates awarded 50 ³/₈" x 18 ¹/₂" x 14 - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 79
419-4298 www.mieleusa.com Technical Service & Support Phone: 800-999-1360 Fax: 888-586-8056 [email protected] International Headquarters Miele & Cie. KG Carl-Miele-Straße 29 33332 Gütersloh Germany Canada Importer Miele Limited Headquarters and Miele Centre 161 Four Valley Drive Vaughan - Miele B 3847 FashionMaster | Operating instructions/Installation instructions - Page 80
FashionMaster en-US,CA M.-Nr. 10 462 411 / 05
Operating Instructions
Steam Ironing System
To prevent accidents and appliance damage, read these instructions
before
installation or use.
en-US,CA
M.-Nr. 10 462 411