Miele CS 1012-1 LP Operating instructions/Installation instructions
Miele CS 1012-1 LP Manual
View all Miele CS 1012-1 LP manuals
Add to My Manuals
Save this manual to your list of manuals |
Miele CS 1012-1 LP manual content summary:
- Miele CS 1012-1 LP | Operating instructions/Installation instructions - Page 1
Operating and Installation Instructions Gas Combiset CS 1012-1 To prevent accidents and appliance damage, read these instructions before installation or use. ® ® en - US, CA M.-Nr. 09 098 780 - Miele CS 1012-1 LP | Operating instructions/Installation instructions - Page 2
WARNING: If the information in this manual is not followed exactly, a fire or explosion may result the gas supplier's instructions. ß If you cannot reach your gas supplier, call the fire department. - Installation and service must be performed by a qualified installer, service agency or the gas - Miele CS 1012-1 LP | Operating instructions/Installation instructions - Page 3
Guide to the combiset 4 IMPORTANT SAFETY INSTRUCTIONS asked questions 19 Technical Service 22 IMPORTANT SAFETY INSTRUCTIONS 25 Installation 28 Installation dimensions 29 Cut out 30 Installation of multiple appliances 31 Attach the spring clips and support - Miele CS 1012-1 LP | Operating instructions/Installation instructions - Page 4
combiset for residential cooking, and for the purposes described in this manual. Other uses are not permitted and can be dangerous. This gas combiset conforms to all uniform safety codes and regulations. Read all instructions before installation or use to prevent injury and appliance damage. These - Miele CS 1012-1 LP | Operating instructions/Installation instructions - Page 5
IMPORTANT SAFETY INSTRUCTIONS Technical safety ~ Installation, repair and maintenance work should be performed by a Miele authorized service technician. Work by unqualified persons could be dangerous and may void the warranty. ~ Before installing the combiset, check for externally visible damage. - Miele CS 1012-1 LP | Operating instructions/Installation instructions - Page 6
IMPORTANT SAFETY INSTRUCTIONS ~ Before servicing, turn off the gas valve and disconnect the power supply by either removing the fuse, unplugging the unit or manually"tripping" the circuit breaker. ~ This equipment has not been designed for maritime use or for use in mobile installations such as - Miele CS 1012-1 LP | Operating instructions/Installation instructions - Page 7
IMPORTANT SAFETY INSTRUCTIONS ~ Do not use pans that extend past the burner grate. Using larger pans may cause the flames to spread out and damage the surrounding countertop - Miele CS 1012-1 LP | Operating instructions/Installation instructions - Page 8
the gas shut off valve and disconnect completely from the electrical supply. Contact the Miele Technical Service Department. Do not use the appliance until it has been repaired. Ensure power is not cord to prevent it from becoming a hazard. SAVE THESE INSTRUCTIONS AND REVIEW THEM PERIODICALLY 8 - Miele CS 1012-1 LP | Operating instructions/Installation instructions - Page 9
Guide to the combiset a Fast burner b Normal burner c Burner grate d Burner indicators e Display Indicators l On/Off indicator m "Residual Heat" Indicator Control knobs: f Rear burner g Front burner 9 - Miele CS 1012-1 LP | Operating instructions/Installation instructions - Page 10
Guide to the combiset Burner n Burner cap o Burner head p Ignition safety control (Thermocouple) q Ignitor r Burner base 10 - Miele CS 1012-1 LP | Operating instructions/Installation instructions - Page 11
Before using the combiset Cleaning the combiset Before using for the first time clean the appliance as follows: ^ Remove any protective foil. ^ Wash the removable parts of the gas burner in a mild solution of warm water and liquid dish soap. ^ Dry and reassemble the parts in the correct order (see - Miele CS 1012-1 LP | Operating instructions/Installation instructions - Page 12
Use Fast-Ignition-System The gas combisets are equipped with a Fast-Ignition-System which incorporates the following features: - The control knob does not need to be pressed until the flame lights. - If the flame goes out because of a draft, for example, the burner is automatically re-ignited. If - Miele CS 1012-1 LP | Operating instructions/Installation instructions - Page 13
Use Turning on ^ To turn on the burner, press the control knob down to pass the resistance, then release the pressure and turn it counterclockwise to the largest flame symbol. The ignitor will "click" and ignite the gas. Regulating the burners ^ The burners can be variably adjusted between the - Miele CS 1012-1 LP | Operating instructions/Installation instructions - Page 14
Use On/Off indicator and Residual heat indicator When the combiset is turned on, the On/Off indicator lights up. Once a pre-set temperature has been reached, the residual heat indicator will also light up. The On/Off indicator goes out when the combiset is turned off. The residual heat indicator - Miele CS 1012-1 LP | Operating instructions/Installation instructions - Page 15
Cookware Burner Normal burner Fast burner Normal burner Fast burner Min. bottom diameter of cookware 4 3/4" (12 cm) 5 1/2" (14 cm) Max. top diamter of cookware 8 11/16" (22 cm) 9 7/16" (24 cm) - Follow the dimensions given in the table. If the bottom diameter is too small the cookware is not safe - Miele CS 1012-1 LP | Operating instructions/Installation instructions - Page 16
Safety features Ignition safety control This appliance is equipped with an Ignition Safety Control. This control cuts the gas supply if the flame goes out and reignition is unsuccessful. ^ To reignite the burner, turn the control knob to"ß", then switch the burner on as usual. Safety cut-off If a - Miele CS 1012-1 LP | Operating instructions/Installation instructions - Page 17
Cleaning and care Never use a steam cleaner to clean this combiset. Pressurized steam could cause permanent damage to the surface and to components. Do not use any sharp or pointed objects which could damage the seal between the frame and the countertop. Never use scouring agents, pads, abrasive - Miele CS 1012-1 LP | Operating instructions/Installation instructions - Page 18
Cleaning and care Burners The burner can be dismantled and cleaned when cool. ^ Remove the burner parts and wash them in a solution of warm water and liquid dish soap. Dry them thoroughly. Make sure that the flame holes are clean and completely dry. ^ Wipe the burner base clean with a damp cloth - Miele CS 1012-1 LP | Operating instructions/Installation instructions - Page 19
Solution The gas supply has been cut-off. - Turn all the controls clockwise to position "ß". You can now operate the appliance as normal. - If the problem persists, disconnect the appliance from the electrical supply for a few seconds. 19 - Miele CS 1012-1 LP | Operating instructions/Installation instructions - Page 20
The burner does not ignite after several attempts. Possible fault Solution Disconnect the appliance from the electrical supply for a few seconds. If the problem persists, check if: - The burner is assembled incorrectly. - The gas valve is closed. - The burner is wet and soiled. - The flame slits - Miele CS 1012-1 LP | Operating instructions/Installation instructions - Page 21
Frequently asked questions The igniter does not spark. Possible fault Solution The circuit breaker has tripped. Re-set the circuit breaker. Contact an electrician for assistance if in doubt. Food has deposited itself between the See "Cleaning and care". ignitor and the burner cap. Food has - Miele CS 1012-1 LP | Operating instructions/Installation instructions - Page 22
In the event of a fault which you cannot easily fix yourself, please contact the Miele Technical Service Department at the address on the back of this booklet. When contacting Technical Service please quote the serial number and model of the appliance. Adhere rating label sticker supplied with the - Miele CS 1012-1 LP | Operating instructions/Installation instructions - Page 23
Contracts offered by other providers for Miele products will not be recognized by Miele. Our goal is to prevent unauthorized (and untrained) service personnel from working on your Miele products, possibly doing further damage to them, you and/or your home. To learn more about MieleCare Extended - Miele CS 1012-1 LP | Operating instructions/Installation instructions - Page 24
24 - Miele CS 1012-1 LP | Operating instructions/Installation instructions - Page 25
to change. Please refer to our website to obtain the most current product specification, technical & warranty information. To prevent accidents and appliance damage read these instructions before installation or use. - Miele CS 1012-1 LP | Operating instructions/Installation instructions - Page 26
Installation The minimum distances given in these Installation instructions are to combustible surfaces, and must be observed to ensure safe items could lead to a gas leak and subsequent explosion. Keep this instruction book in a safe place for reference and pass it on to any future user. 26 - Miele CS 1012-1 LP | Operating instructions/Installation instructions - Page 27
hood manufacturer must be maintained between the combiset and the hood above it. See the installation instructions of the hood for these safety measurements. If the hood manufacturers instructions are not available or if flammable objects are installed over the combiset (e.g. cabinets, utensil rail - Miele CS 1012-1 LP | Operating instructions/Installation instructions - Page 28
IMPORTANT SAFETY INSTRUCTIONS Safety distances to the sides of the appliance The 2" (50 mm) for CS 1112 CS 1122 CS 1212 CS 1221 CS 1223 CS 1326 CS 1327 CS 1411 6" (150 mm) for CS 1312 CS 1322 CS 1421 10" (250 mm) for CS 1011 CS 1012 / 1012-1 CS 1028 recommended not recommended not - Miele CS 1012-1 LP | Operating instructions/Installation instructions - Page 29
Installation Safety distance from the wall covering If a wall covering is installed, a minimum safety distance must be maintained between the countertop cut-out and the covering, since high temperatures can damage these materials. If the covering is made of a combustible material (such as wood), the - Miele CS 1012-1 LP | Operating instructions/Installation instructions - Page 30
Installation Installation dimensions a Spring clips b Appliance front c Installation height d Power supply box with connection cable, L = 47 1/4" (1200 mm) e Gas fitting f Rating label 30 - Miele CS 1012-1 LP | Operating instructions/Installation instructions - Page 31
back wall, as well as from any tall unit or side wall to the left or right of the combiset. See also the "IMPORTANT SAFETY INSTRUCTIONS". ^ Seal the cut surfaces with a suitable sealant to avoid swelling caused by moisture. The materials used must be heat resistant. If during installation the seal - Miele CS 1012-1 LP | Operating instructions/Installation instructions - Page 32
Installation Installation of multiple appliances When installing more than one combiset appliance, a support bar b must be installed between the appliances. Countertop cut-out two appliances Countertop cut-out three appliances For the installation of two appliances the width - Miele CS 1012-1 LP | Operating instructions/Installation instructions - Page 33
Installation Sample calculations for a countertop cut-out for three appliances A appliance width minus 5/16" (8 mm) B appliance width C appliance width minus 5/16" (8 mm) 11" (280 mm) 11 5/16" (288 mm) 11" (280 mm) 11" (280 mm) 15" (380 mm) 14 5/8" (372 mm) 11" (280 mm) 22 11/16" (576 mm) 22 - Miele CS 1012-1 LP | Operating instructions/Installation instructions - Page 34
bars c Space between support bar and countertop d Cover The illustration represents the attachment of spring clips a and support bars b for 3 appliances. An additional support bar is required for each additional appliance. The position for attachment of an additional support bar depends on the - Miele CS 1012-1 LP | Operating instructions/Installation instructions - Page 35
Attach the spring clips and support bars Wood or solid surface countertops Installation ^ Place the supplied spring clips a and the support bars b at the marked positions as shown above, by laying them on the upper edge of the cut-out and then securing them with the 1/8" x 1" (3.5 x - Miele CS 1012-1 LP | Operating instructions/Installation instructions - Page 36
needed for granite countertops. ^ Coat the side and lower edges of the spring clips between a and b with silicone. ^ Position and attach the spring clips a and support bars b with strong, double-sided tape c. ^ Fill the space e between the support bars b and the countertop with silicone. 36 - Miele CS 1012-1 LP | Operating instructions/Installation instructions - Page 37
Note: push the rear out first. ^ Push the installed appliance to the side until the holes in the support bar are visible. Removing the appliance If the appliance is accessible from below, it can be pushed up and it up and out. ^ Insert the sealing strip d into the holes in the support bar b. 37 - Miele CS 1012-1 LP | Operating instructions/Installation instructions - Page 38
the countertop. If the appliance is sealed into position, the countertop or appliance could be damaged if it needs to be removed for maintenance or service. The grouting a and shaded area under the appliance frame must be flat and even so that the frame will lie evenly and the sealing strip - Miele CS 1012-1 LP | Operating instructions/Installation instructions - Page 39
C 22.1). ,WARNING Disconnect the appliance from the main power supply before installation or service. To reduce the risk of electric shock, make sure that the appliance is properly qualified electrician. Note to the installer Please leave these instructions with the consumer or the appliance. 39 - Miele CS 1012-1 LP | Operating instructions/Installation instructions - Page 40
must be performed by a qualified installer, service agency or the gas supplier. The gas testing performed in excess of ½ psi (3.5 kPa), or isolated from the gas line by closing its individual manual shut off valve at test pressures equal to or less than ½ psi (3.5 kPa). - the National Fuel - Miele CS 1012-1 LP | Operating instructions/Installation instructions - Page 41
allow the appliance to be lifted out of the countertop for cleaning or servicing. Make sure that any drawers, cabinet doors, etc., do not rub on gas leak. If there is any doubt concerning installation contact the Miele Technical Service Department. a Combiset b ½" NPT c Regulator As shown in the - Miele CS 1012-1 LP | Operating instructions/Installation instructions - Page 42
Gas connection Nominal ratings Maximum output Normal burner Fast burner Total output Gas type Natural Gas (NG) Propane (LP) Natural Gas (NG) Propane (LP) Natural Gas (NG) Propane (LP) Minimum output Normal burner Fast burner Gas type Natural Gas (NG) Propane (LP) Natural Gas (NG) Propane (LP) - Miele CS 1012-1 LP | Operating instructions/Installation instructions - Page 43
it was originally configured for, both the regulator and burner must be converted. A conversion kit is available as an optional accessory from the Miele Technical Service Department. 43 - Miele CS 1012-1 LP | Operating instructions/Installation instructions - Page 44
Help protect our environment Disposal of packing materials The cardboard box and packing materials are biodegradable and recyclable. Please recycle. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children. Danger of suffocation! Disposal of an old - Miele CS 1012-1 LP | Operating instructions/Installation instructions - Page 45
45 - Miele CS 1012-1 LP | Operating instructions/Installation instructions - Page 46
46 - Miele CS 1012-1 LP | Operating instructions/Installation instructions - Page 47
47 - Miele CS 1012-1 LP | Operating instructions/Installation instructions - Page 48
Alteration rights reserved /0214 M.-Nr. 09 098 780 / 00 INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.
Operating and Installation
Instructions
Gas Combiset
CS 1012-1
To prevent accidents and
appliance damage,
read these instructions
before
installation or use.
M.-Nr. 09 098 780
en - US, CA
®
®