Miele DA 2510 Operating instructions/Installation instructions
Miele DA 2510 Manual
 |
View all Miele DA 2510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Miele DA 2510 manual content summary:
- Miele DA 2510 | Operating instructions/Installation instructions - Page 1
Operating and Installation Instructions Ventilation Hood To prevent accidents and damage to the appliance, you must read these instructions before installing the appliance and using it for the first time. en-US M.-Nr. 10 561 080 - Miele DA 2510 | Operating instructions/Installation instructions - Page 2
INSTRUCTIONS 4 Caring for the environment 13 Guide to the appliance 14 Description of functions 16 Con@ctivity 2.0 function 17 Operation (Automatic mode 18 Cooking with Con@ctivity 2.0 (Automatic mode 18 Temporarily exiting Automatic mode 20 Resuming Automatic mode 20 Operation (Manual - Miele DA 2510 | Operating instructions/Installation instructions - Page 3
Contents Installation...31 Before installation 31 Installation Instructions 31 Installation parts ...32 Appliance dimensions 34 Distance the cooktop 41 Activation failed 41 Deactivating Con@ctivity 2.0 41 Service and warranty 42 Location of the data plate 42 MieleCare ...42 Technical data ... - Miele DA 2510 | Operating instructions/Installation instructions - Page 4
Read all instructions before installing or using the appliance for the first time. Only use the appliance for its intended purpose. Keep these operating instructions in a safe place and pass them on to any future user. Use CAUTION: For General Ventilating Use Only. Do Not Use To Exhaust Hazardous - Miele DA 2510 | Operating instructions/Installation instructions - Page 5
Use this appliance only in the manner intended by the manufacturer. If you have questions, contact Miele. - Before servicing or cleaning the appliance, switch power off at the service panel and lock the service the provided installation instructions. Contact Miele's Technical Service Department for - Miele DA 2510 | Operating instructions/Installation instructions - Page 6
INSTRUCTIONS in doubt, consult a qualified electrician. Do not use a power bar or extension cord to connect the ventilation the "Cleaning and care" section of this manual. Under no circumstances should any other parts of components should be replaced by Miele original parts only. Only with these - Miele DA 2510 | Operating instructions/Installation instructions - Page 7
IMPORTANT SAFETY INSTRUCTIONS If the power cord is damaged, it must only be replaced by a qualified service technician. During on the electrical service panel have been removed. - The power cable (if present) has been unplugged from the socket (pull the plug not the cord). Proper use WARNING: - Miele DA 2510 | Operating instructions/Installation instructions - Page 8
SAFETY INSTRUCTIONS - a) SMOTHER FLAMES with a close fitting lid, cookie sheet, or metal tray then turn off the burner. BE CAREFUL TO PREVENT BURNS. If the flames do not go out immediately, EVACUATE AND CALL THE FIRE DEPARTMENT. - b) NEVER PICK UP A FLAMING PAN - You may be burned. - c) DO NOT USE - Miele DA 2510 | Operating instructions/Installation instructions - Page 9
ventilation hood. To ensure that cooking vapors are properly cleaned, never use the ventilation hood without the grease filters in place. There is a risk of fire if cleaning is not completed according to the instructions in this manual. Please note that the heat rising from the stovetop during - Miele DA 2510 | Operating instructions/Installation instructions - Page 10
IMPORTANT SAFETY INSTRUCTIONS Proper installation WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, hidden utilities. - d) Ducted hoods must always be vented to the outdoors. - e) Do not use this hood with any solid-state speed control device. To determine whether a ventilation hood may be - Miele DA 2510 | Operating instructions/Installation instructions - Page 11
gloves to protect your hands from being cut. When installing the exhaust duct, only use pipes or tubes made of non-flammable material. These can be obtained from your Miele dealer or from Miele Technical Service. Exhaust air should not be vented into a chimney or vent flue which is otherwise - Miele DA 2510 | Operating instructions/Installation instructions - Page 12
IMPORTANT SAFETY INSTRUCTIONS Cleaning and care Never use a steam cleaner to clean the ventilation hood. The steam can reach the electrical components and cause a short circuit. Accessories Use only genuine original Miele parts. If parts or accessories from other manufacturers are used, the - Miele DA 2510 | Operating instructions/Installation instructions - Page 13
and components which were essential for the proper functioning and safe use of the equipment. Handling these materials improperly by disposing of them local authorities, dealers or Miele in order to dispose of and recycle electrical and electronic appliances. Miele assumes no responsibility for - Miele DA 2510 | Operating instructions/Installation instructions - Page 14
Guide to the appliance 14 - Miele DA 2510 | Operating instructions/Installation instructions - Page 15
Guide to the appliance a Exhaust connection Extraction ducting can be directed through the back of the ventilation hood, upwards to the ceiling, or to the side. b - Miele DA 2510 | Operating instructions/Installation instructions - Page 16
hoods require a recirculation kit and OdorFree Charcoal Filters (available as optional accessories), see "Technical Data" for more information. The air is drawn in and cleaned first by the grease filters and then by the charcoal filters. The clean air is then recirculated back into the kitchen. 16 - Miele DA 2510 | Operating instructions/Installation instructions - Page 17
status of a Miele induction cooktop. Description of functions The cooktop transmits information about its operational status to the hood using a radio signal. Con@ctivity 2.0 stick . Please refer to the installation instructions for the Con@ctivity 2.0 stick to determine whether connection to - Miele DA 2510 | Operating instructions/Installation instructions - Page 18
2.0 is active, the hood always operates in Automatic mode (see "Activating Con@ctivity 2.0"). See "Cooking without Con@ctivity 2.0" for information on manually operating the hood. Cooking with Con@ctivity 2.0 (Automatic mode) Turn on a burner to the desired power setting. Overhead cooktop lighting - Miele DA 2510 | Operating instructions/Installation instructions - Page 19
3, where it remains for approx. 5 minutes. After this, the fan level is once again determined by the Con@ctivity function. You can also manually select a different fan level before then. Deactivation Turn off all burners. Over the next few minutes, the ventilation hood fan setting will decrease - Miele DA 2510 | Operating instructions/Installation instructions - Page 20
Automatic mode The ventilation hood resumes Automatic mode: If the ventilation hood has not been used for a period of approx. 5 minutes after the manual selection of a fan level, or If the manually selected fan level once again matches the automatic setting, or If the ventilation hood fan - Miele DA 2510 | Operating instructions/Installation instructions - Page 21
mode) Cooking without Con@ctivity 2.0 (Manual mode) The hood can be operated manually if: - The Con@ctivity 2.0 function the blower level display. Selecting the power level Power levels 1 to 3 can be used for light to heavy cooking vapors and odors. For strong vapors and odors that are - Miele DA 2510 | Operating instructions/Installation instructions - Page 22
Operation (Manual mode) Power management The ventilation hood features a power management system to help save energy. The blower power level is reduced and the lighting is turned - Miele DA 2510 | Operating instructions/Installation instructions - Page 23
Operation (Automatic and Manual modes) Filter saturation indicator The number of hours the hood hardening and making cleaning more difficult. - Select a longer cleaning interval of 40 or 50 hours if you use very little fat when cooking. Press the On/Off button to turn the blower off. Press - Miele DA 2510 | Operating instructions/Installation instructions - Page 24
Operation (Automatic and Manual modes) Activating/changing the charcoal filter saturation indicator The charcoal filter is required for the recirculation mode. The filter saturation indicator for the charcoal filter - Miele DA 2510 | Operating instructions/Installation instructions - Page 25
to try to capture cooking vapors that have already been distributed throughout the kitchen. - Make sure that you switch off the hood after use. - Clean or change the filters at regular intervals. Heavily soiled filters reduce performance, increase the risk of fire and are unhygienic. Energy-saving - Miele DA 2510 | Operating instructions/Installation instructions - Page 26
FOLLOWING: Before cleaning or servicing the hood, disconnect it from the power supply, see "IMPORTANT SAFETY INSTRUCTIONS". Stainless steel housing General . Make sure that no water gets into the interior of the hood. Only use a damp cloth to clean the hood, especially in the control panel area. - Miele DA 2510 | Operating instructions/Installation instructions - Page 27
detergent. Select a program with a wash temperature between 120°F (50°C) and 150°F (65°C). In a Miele dishwasher use the "Normal" program. Depending on the detergent used, cleaning the filters in a dishwasher may cause the inside filter surfaces to become discolored. However, this will not affect - Miele DA 2510 | Operating instructions/Installation instructions - Page 28
are available from your Miele dealer or from Miele. See "Technical data" for the type and reference number. Installing/replacing the charcoal filters Before installing or replacing the charcoal filters, you must first remove the grease filters (see previous section for instructions). Take the - Miele DA 2510 | Operating instructions/Installation instructions - Page 29
will light up to remind you to change the charcoal filter regularly. The charcoal filter saturation counter requires one-time activation before use (see the "Operation" chapter). Resetting the filter saturation indicator for the charcoal filter If the filter saturation counter is activated, it - Miele DA 2510 | Operating instructions/Installation instructions - Page 30
the blower and the lighting. The light bulbs can get very hot when in use. Allow the bulbs to cool down for a few minutes before changing them. from Miele or specialist dealers. Disconnect the hood from the electrical supply before replacing the light bulbs (see "IMPORTANT SAFETY INSTRUCTIONS"). - Miele DA 2510 | Operating instructions/Installation instructions - Page 31
all of the information contained in this chapter and also in the "IMPORTANT SAFETY INSTRUCTIONS" section. Installation Instructions Please refer to the accompanying installation sheet for instructions on how to install the appliance. Installation The ventilation hood is intended for installation - Miele DA 2510 | Operating instructions/Installation instructions - Page 32
Installation Installation parts 32 - Miele DA 2510 | Operating instructions/Installation instructions - Page 33
screws are intended for the attachment of the hood to a solid wooden cabinet floor with a minimum thickness of ⁵/₈" (16 mm). Ensure the floor can permanently support the applied load. 33 - Miele DA 2510 | Operating instructions/Installation instructions - Page 34
Installation Appliance dimensions The drawing is not to scale. 34 - Miele DA 2510 | Operating instructions/Installation instructions - Page 35
the information contained in the "IMPORTANT SAFETY INSTRUCTIONS" section. Cooking appliance Electric Cooktops Electric Barbeques (8.1 kW) Single Burner Gas Cooktops > 27,600 BTU/hr (8.1 kW) Minimum distance S Miele appliance Non-Miele appliance 24" (610 mm) 26" (660 mm) 26" (660 mm) 30" ( - Miele DA 2510 | Operating instructions/Installation instructions - Page 36
not to the side. - The mounting area must be easily accessible. The ventilation hood should be easy to reach and disassemble in case a service call is necessary. This should be taken into consideration when planning the position of cabinetry, shelves, ceilings or decorative elements in the vicinity - Miele DA 2510 | Operating instructions/Installation instructions - Page 37
air into spaces within walls or ceilings or in attics, crawl spaces or garages. To reduce the risk of fire, only use metal ductwork. Please read and follow the "IMPORTANT SAFETY INSTRUCTIONS" to reduce the risk of personal injury. Follow all local building codes when installing the hood. Only - Miele DA 2510 | Operating instructions/Installation instructions - Page 38
like to reduce the environmental impact of your ventilation system by limiting the CFM output the Reducing Collar can be installed. It reduces the air flow to less than 400 CFM. Check local building codes for max. CFM requirements. Push the Reducing Collar on the exhaust port of the blower. Push - Miele DA 2510 | Operating instructions/Installation instructions - Page 39
and found acceptable for use with this model hood. If there is any question concerning the electrical connection of this appliance to your power supply, please consult a licensed electrician or call Miele's Technical Service Department. Grounding Instructions WARNING - Improper grounding can - Miele DA 2510 | Operating instructions/Installation instructions - Page 40
stick. See the relevant installation instructions of the Con@ctivity 2.0 stick. Activating the Con@ctivity 2.0 function To use the Con@ctivity 2.0 function, the and installation instructions. Please refer to the operating instructions before starting. Activate the ventilation hood first, then the - Miele DA 2510 | Operating instructions/Installation instructions - Page 41
information can be found in the operating instructions for the cooktop. When the the cooktop. The Con@ctivity 2.0 function is now ready for use. If you do not confirm within 4 minutes, activation will be hood and cooktop, the function must first be deactivated and then reactivated on both - Miele DA 2510 | Operating instructions/Installation instructions - Page 42
contact your Miele dealer or Miele Technical Service. The telephone number for Miele is listed at the back of these instructions. When contacting Miele, please Service Contract in the industry that guarantees repairs by a Miele Authorized Service Provider using genuine Miele parts. Only genuine Miele - Miele DA 2510 | Operating instructions/Installation instructions - Page 43
Technical data Blower motor LED ClearView Lighting DA 2580 DA 2510 Total connected load DA 2580 DA 2510 Voltage, frequency Fuse rating Power cord length Weight DA 2580 DA 2510 350 W 2 x 3 W 4 x 3 W 356 W 362 W 120 V AC, 60 Hz 15 A 2.5 ft (0.75 m) 26.6 lbs (12.1 kg) 31.5 lbs (14.3 kg) Optional - Miele DA 2510 | Operating instructions/Installation instructions - Page 44
- Miele DA 2510 | Operating instructions/Installation instructions - Page 45
- Miele DA 2510 | Operating instructions/Installation instructions - Page 46
- Miele DA 2510 | Operating instructions/Installation instructions - Page 47
419-4298 www.mieleusa.com Technical Service & Support Phone: 800-999-1360 Fax: 888-586-8056 [email protected] International Headquarters Miele & Cie. KG Carl-Miele-Straße 29 33332 Gütersloh Germany Canada Importer Miele Limited Headquarters and Miele Centre 161 Four Valley Drive Vaughan - Miele DA 2510 | Operating instructions/Installation instructions - Page 48
DA 2580, DA 2510 en-US M.-Nr. 10 561 080 / 02
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
 |
 |
Operating and Installation Instructions
Ventilation Hood
To prevent accidents and damage to the appliance, you
must
read
these instructions before installing the appliance and using it for the first
time.
en-US
M.-Nr. 10 561 080