Miele F 1471 SF Operating and Installation manual
Miele F 1471 SF Manual
 |
View all Miele F 1471 SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Miele F 1471 SF manual content summary:
- Miele F 1471 SF | Operating and Installation manual - Page 1
Operating and Installation Instructions Freezer with Ice/Water Dispenser F 1471 SF To prevent accidents and appliance damage read these instructions before installation or use. en - US, CA M.-Nr. 09 169 330 - Miele F 1471 SF | Operating and Installation manual - Page 2
Contents IMPORTANT SAFETY INSTRUCTIONS 4 Guide to the freezer 8 Control panel for freezer 9 Control panel for Ice/Water Dispenser 9 Before use food 17 Defrosting 18 Cooling drinks quickly 18 SuperCool 20 Ice/Water Dispenser 21 Safety lock 24 Lighting 24 Settings 25 Anti-condensation - Miele F 1471 SF | Operating and Installation manual - Page 3
33 Water filter 36 Water filter change indicator 36 Exchanging the water filter 37 Confirming the filter change 38 Using an external water filter 38 Lead free certificate 41 Frequently asked questions 42 After sales service 49 Caring for the environment 52 Installation 53 Installation site - Miele F 1471 SF | Operating and Installation manual - Page 4
instructions before installation and use to prevent accidents and machine damage. This appliance is intended for residential use only. Use only as described in this Operating manual a qualified electrician if in doubt. ~ Before installation or service, disconnect the power supply to the work area - Miele F 1471 SF | Operating and Installation manual - Page 5
completely installed and secured per installation instructions. ~ Before installing Miele's Technical Service Department. ~ This appliance must not be used in a non-stationary location (e.g. on a ship). ~ Do not install connection to a hot water supply. ~ Do not use water that is microbiologically or - Miele F 1471 SF | Operating and Installation manual - Page 6
abilities, or experience with the machine should not use it without supervision or instruction by a responsible person. ~ To reduce the risk of injury, do appliance. ~ To avoid serious illness or death, do not deactivate the water filter display. ~ Do not use sharp-edged objects to remove frost and - Miele F 1471 SF | Operating and Installation manual - Page 7
IMPORTANT SAFETY INSTRUCTIONS ~ Do not block the ventilation gaps in the plinth appliance. Pressurized steam could damage electrical components and cause a short circuit. ~ Before using the Ice/Water dispenser it is important to flush the lines and clean the part thoroughly. Disposal of your old - Miele F 1471 SF | Operating and Installation manual - Page 8
Guide to the freezer a Interior lighting b Door shelf c Ice cube maker d Ice cube container e Interior shelf f Control panel for the Freezer g Main switch to turn the appliance On/Off h Freezer baskets i Water filter j Ice / Water dispenser in the door k Control panel for Ice / Water Dispenser l - Miele F 1471 SF | Operating and Installation manual - Page 9
temperature in the freezer c On/Off sensor button for the SuperCool function d On/Off sensor button for the Ice/Water dispenser e Sensor button for the temperature and/or door alarm* f Water filter change indicator* * Only visible when the relevant function is activated Control panel for Ice - Miele F 1471 SF | Operating and Installation manual - Page 10
remove this protective film until the appliance has been completely installed. After removing the protective film clean the exterior surface the inside of the appliance and the accessories with a mild solution of warm water and liquid dish soap. Dry with a soft cloth. Turning the appliance On/ - Miele F 1471 SF | Operating and Installation manual - Page 11
. These buttons allow you to: - adjust the temperature, - select the SuperCool function, or - turn the Ice/Water Dispenser On/Off. For additional information, see the corresponding sections in this manual. ^ To leave the settings menu, touch the access button "p" so it turns white. The last settings - Miele F 1471 SF | Operating and Installation manual - Page 12
until you see ; in the display. ^ Touch the access button "p". You have now left the Custom settings mode. Note: the button sound of the Ice/Water dispenser must be turned off separately. When you are in the Custom settings mode the door alarm is turned off automatically. Once the door is - Miele F 1471 SF | Operating and Installation manual - Page 13
all food out of the appliance ^ Turn the appliance off ^ Unplug the appliance ^ Empty the ice cube container ^ Clean the interior ^ Remove and discard the water filter (secure the filter cap) ^ Leave the door open to prevent odors Settings 13 - Miele F 1471 SF | Operating and Installation manual - Page 14
Temperature and door alarm The appliance is equipped with an alarm system, to ensure that the temperature does not rise unnoticed because of energy loss or an open door. The alarm system is always operational, it does not need to be switched on. Turning the temperature alarm Off As soon as the - Miele F 1471 SF | Operating and Installation manual - Page 15
To freeze fresh food and store frozen food for an extended period of time, a temperature of 0°F (-18°C) is suggested. The room temperature and the installation location can affect the time it takes for the appliance to drop to the coldest temperature. If the room temperature is too high, it may - Miele F 1471 SF | Operating and Installation manual - Page 16
Setting the temperature Temperature unit (Fahrenheit/Celsius) The temperature can be displayed in degrees Fahrenheit (°F) or Celsius (°C). ^ While holding down the X button, press the access button "p" once. Keep holding the X button down until the following appears in the display (approx. 5 - Miele F 1471 SF | Operating and Installation manual - Page 17
Using the freezer efficiently Freezing food Fresh food should be frozen as quickly as possible. This helps maintain the nutritional value, vitamin content, appearance and taste of the food. Never refreeze partially or fully defrosted food. Consume defrosted food as soon as possible, it will lose - Miele F 1471 SF | Operating and Installation manual - Page 18
be defrosted at room temperature in its packaging, or in a covered bowl. Most vegetables can be cooked while still frozen. Simply place directly into boiling water or hot oil. 18 - Miele F 1471 SF | Operating and Installation manual - Page 19
should be trimmed, washed, and blanched. To blanch: bring a large saucepan of water to a boil, then submerge the vegetables in rapidly boiling water for 2-3 minutes, depending on type. Remove, and plunge into ice-cold water to cool quickly. Drain and pack for freezing. - Lean meat freezes better - Miele F 1471 SF | Operating and Installation manual - Page 20
SuperCool When the SuperCool function is activated, the appliance is cooled as cold as possible (to a factory-preset temperature). SuperCool The SuperCool function is ideal for freezing large quantities of unfrozen food. Ideally the function should be switched on 4 - 6 hours before the food is - Miele F 1471 SF | Operating and Installation manual - Page 21
. You can interrupt the flushing process at any time to empty the container, by taking your finger off the "water" button. During this time, the "water" button will flash yellow again. As soon as the flushing process is complete, you will hear a beep, and the buttons on the control panel will - Miele F 1471 SF | Operating and Installation manual - Page 22
Water Dispenser Before using the Ice/Water Dispenser for the first time, you must flush the water Water Ice/Water water dispenser is now ready for Water water water produced during the first 24 hours after switching on the ice/water dispenser. The water is used for the initial flushing of the water - Miele F 1471 SF | Operating and Installation manual - Page 23
under the dispenser. The ice cube maker can produce approx. 150 ice cubes within 24 hours. Note: Ice production will vary due to your water supply temperature, pressure and hardness. The amount of ice cubes produced depends on the temperature in the freezer section. The lower the temperature, the - Miele F 1471 SF | Operating and Installation manual - Page 24
several hours before the appliance or ice maker is switched off. ^ Open the freezer door. ^ Touch the "lock" button so it turns yellow. The Ice/Water dispenser buttons are now locked. To unlock the buttons: ^ Touch the "lock" button so it turns white. ^ Touch the sensor button for the ice maker - Miele F 1471 SF | Operating and Installation manual - Page 25
dispenser can be adjusted: Entering the settings mode Anti-condensation heater A heater behind the control panel of the Ice/Water dispenser ensures that frost and ice do not build-up. To save energy, you can turn the heater off. This feature is turned off by - Miele F 1471 SF | Operating and Installation manual - Page 26
Ice/Water Dispenser Anti-clumping The anti-clumping feature ensures that crushed ice or ice cubes do not freeze together. A noise will be heard periodically to indicate - Miele F 1471 SF | Operating and Installation manual - Page 27
The freezer defrosts automatically. The moisture generated in the appliance collects in the evaporator. It is automatically defrosted and dissipated by the condenser periodically. This automatic defrosting system enables the freezer to remain permanently ice-free, while ensuring that the food stored - Miele F 1471 SF | Operating and Installation manual - Page 28
Adjusting the interior fittings Moving the shelves The shelves can be adjusted according to the height of the food. ^ Using both hands, grasp the shelf from underneath and lift slightly so that the rear of the shelf is slightly above the mountings. ^ Pull the shelf forward. ^ Move the shelf to the - Miele F 1471 SF | Operating and Installation manual - Page 29
Adjusting the interior fittings Freezer baskets For easier loading, unloading, and cleaning, the freezer baskets can be shifted or completely removed. ^ Pull the basket forward until resistance is felt. On the hinged-side of the door is a safety lock, which must be turned to a horizontal position - Miele F 1471 SF | Operating and Installation manual - Page 30
non-abrasive stainless steel cleaner (available from Miele). Only use a mild solution of warm water and liquid dish soap to clean this appliance. could penetrate electrical components and cause a short circuit. Do not allow water to get into the electronic unit or lights. The data plate located - Miele F 1471 SF | Operating and Installation manual - Page 31
and store it in a cool place. ^ Take out any removable parts, e.g., shelves, baskets. Cleaning the interior and accessories Use a mild solution of warm water and liquid dish soap. Wash all accessories and drawers by hand. Do not wash in a dishwasher. ^ Clean the appliance as needed. ^ After washing - Miele F 1471 SF | Operating and Installation manual - Page 32
ice cube container. ^ Empty and clean the ice cube container with lukewarm water. ^ Thoroughly dry the container and the anti-clumping screw to prevent new To re-insert push the ice cube container all the way back onto the supports until it locks into position. ^ If the container cannot be pushed all - Miele F 1471 SF | Operating and Installation manual - Page 33
oils or grease on the door seals. This may cause the seals to deteriorate and become porous over time. ^ Clean the door seals with warm water and dry thoroughly. After cleaning ^ Return all shelves and accessories. ^ Plug in the appliance and turn it on with the main switch. ^ Switch on the - Miele F 1471 SF | Operating and Installation manual - Page 34
Cleaning and care Changing the light bulb The lighting automatically switches off after the door has been open for approx. 10 minutes. This is not a fault. If the light does not come on when the door is opened briefly, the light bulb should be changed. ^ Use the main switch to turn the appliance - Miele F 1471 SF | Operating and Installation manual - Page 35
Cleaning and care Side lighting Ice/Water Dispenser lighting Do not remove the used again, the light bulb should be changed. The dispenser lighting should only be repaired or replaced by Miele Technical Service. ^ Pull the defective light bulb from the socket. ^ Place the new bulb in the socket. - Miele F 1471 SF | Operating and Installation manual - Page 36
removing chlorine and other substances from the incoming tap water. Note: - After installing a new water filter and switching on the ice maker, discard the the next 24 hours. Additional water filters are available from Miele. It is important to change the water filter regularly. - If the appliance - Miele F 1471 SF | Operating and Installation manual - Page 37
to eject forcefully. Use caution when removing. Water filter ^ Remove the cap from the used filter, 3. ^ Take a new filter cartridge out of the packaging and remove the protective cap. ^ Push the cap onto the new filter cartridge, 4. ^ Push in and rotate the filter cap on the base panel of your - Miele F 1471 SF | Operating and Installation manual - Page 38
in the electronic. Using an external water filter If your household water supply already has an external water filter installed, leave the standard water filter (bypass cartridge) installed in the appliance. Confirming the filter change ^ Press and hold the filter change sensor button. ^ At the - Miele F 1471 SF | Operating and Installation manual - Page 39
Water filter State of California Department of Public Health Water Treatment Device Certificate Number Trademark/Model Designation 9000 077095 Miele 07134220 Manufacturer: Cuno, Incorporated 06 - 1775 Date Issued: March 10, 2006 Date Revised: April 3, 2008 Replacement Elements 9000 077104 - Miele F 1471 SF | Operating and Installation manual - Page 40
. Failure to do so may void warranty. Change filter at least every 6 months. Flush new cartridge for 3 minutes. CAUTION: To avoid property damage due to water leakage, you MUST read and follow these operating instructions before installation and use of this product. For estimated costs of - Miele F 1471 SF | Operating and Installation manual - Page 41
Lead free certificate This product F 1471 SF (KIMIWD18US) is tested and certified by WQA against ORD0902 for California "lead free" compliance. Miele & Cie. KG Carl-Miele-Straße 29 D-33332 Gütersloh 41 - Miele F 1471 SF | Operating and Installation manual - Page 42
With the aid of the following guide minor problems can be corrected without a service call. Repairs should only be carried the breaker trips again the appliance or the outlet may be defective. Contact Miele or a qualified electrician. The temperature is set incorrectly. Check the display. - Miele F 1471 SF | Operating and Installation manual - Page 43
appliance. Check whether the water Contact Miele Technical pipe in the appliance is Service. defective. Check whether the water Contact a plumber. pressure is too low. Check whether the correct Self-tapping valves and water valve has been 3/16" (4.76 mm) saddle installed. valves reduce the - Miele F 1471 SF | Operating and Installation manual - Page 44
filters water filter needs to be from Miele. changed soon. The filter display is flashing red. The water filter needs to See "Exchanging the be changed. water filter "Anti-condensation heater" for more information. Problems with the ice/water dispenser Issue Possible fault Solution The ice - Miele F 1471 SF | Operating and Installation manual - Page 45
Miele. Check if: - the Ice/Water dispenser is switched on. - the Safety Lock is turned on. See "Ice/Water Dispenser" and/or "Plumbing" for more information. - the water the correct water valve has been installed. Self-tapping valves and 3/16" (4.76 mm) saddle valves reduce the water pressure and - Miele F 1471 SF | Operating and Installation manual - Page 46
same time. Check whether the water filter needs changing. See "Water filter" for more information. Check the water pressure. The water pressure must be between 25 and 120 psi (1.72-8.25 bar). Consult a plumber. Check whether the correct water valve has been installed. Self-tapping valves and - Miele F 1471 SF | Operating and Installation manual - Page 47
Problems with the ice/water dispenser Issue Possible fault Solution The ice maker is not producing enough ice or the ice cubes are misshapen. Check the water pressure. The water the correct temperature". Change the water filter. See "Water filter". The Ice/Water dispenser The appliance is not - Miele F 1471 SF | Operating and Installation manual - Page 48
Frequently asked questions The appliance is making noises. Issue Possible fault Solution Brrrrr... Blubb, blubb... Humming noise made by the compressor. This noise can get louder for brief periods when the motor is switching on. A gurgling noise can be heard when coolant is circulating through - Miele F 1471 SF | Operating and Installation manual - Page 49
by 5 years of worry-free ownership. MieleCare is the only Extended Service Contract in the industry that guarantees repairs by a Miele Authorized Service Provider using genuine Miele parts. Only genuine Miele parts installed by factory-trained professionals can guarantee the safety, reliability and - Miele F 1471 SF | Operating and Installation manual - Page 50
50 - Miele F 1471 SF | Operating and Installation manual - Page 51
Installation instructions Information is subject to change. Please refer to our website to obtain the most current product specification, technical & warranty information. To prevent accidents and machine damage read these instructions before installation or use. - Miele F 1471 SF | Operating and Installation manual - Page 52
Caring for the environment Disposal of packing materials The cardboard box and packing materials are biodegradable and recyclable. Please recycle. Ensure that any plastic wrappings, bags, etc., are disposed of safely and kept out of the reach of babies and young children. Danger of suffocation! - Miele F 1471 SF | Operating and Installation manual - Page 53
- outdoors, - in an environment with dripping water, - in rooms which are at risk of frost. The installation location should not be exposed to direct sunlight, nor near a heat source, such as an oven, radiator, etc. Empty weight of your machine: F 1471 SF 364 lbs (165 kg) The ambient temperature - Miele F 1471 SF | Operating and Installation manual - Page 54
. The approx. weight of a fully loaded machine is: F 1471 SF 558 lbs (253 kg) To ensure that the appliance is installed securely and functions properly, the base must be flat, level and made of a hard, rigid material. If in doubt, contact Miele. Furniture/fixtures The new appliance will be mounted - Miele F 1471 SF | Operating and Installation manual - Page 55
. Contact Miele or your dealer for specific information about which combinations will work with your appliance. Single column The appliance can be installed at any preferred location in the kitchen. However, be sure the door will open and close properly in the chosen location. For instructions on - Miele F 1471 SF | Operating and Installation manual - Page 56
within its own niche using the mounting accessories included. The "Merging Kit" will also be needed. The "Merging Kit" is available from Miele. Installation with partition without using the "Merging Kit" If there is a partition with a thickness of more than 6 5/16" (160 mm) between the adjacent - Miele F 1471 SF | Operating and Installation manual - Page 57
Door dimensions (open 115°) Installation F 1471 SF A 20 11/16" (525 mm) B 9 3/16" (234 mm) Miele recommends using the full door opening angle of 115° for this freezer. 57 - Miele F 1471 SF | Operating and Installation manual - Page 58
Installation Niche dimensions F 1471 SF A 18 ½" (469.8 mm) B 18" (457 mm) 58 - Miele F 1471 SF | Operating and Installation manual - Page 59
Power supply and water connection Installation 1. Power supply 2. Water connection F 1471 SF A 9" (229 mm) 59 - Miele F 1471 SF | Operating and Installation manual - Page 60
risk of injury or damage to the product, two people should be used for installation. These installation instructions are intended for use by qualified installers. In addition to these instructions, the appliance must be installed in accordance with all local codes, or in the absence of a local code - Miele F 1471 SF | Operating and Installation manual - Page 61
installation niche To ensure a safe, trouble-free installation and the best possible cosmetic result, check to be sure that the installation space complies with the installation of the power outlet. ^ Check the location of the water connection (see "Plumbing"). ^ Check that all furniture parts in - Miele F 1471 SF | Operating and Installation manual - Page 62
(optional accessory) Always disconnect the appliance from the power supply when performing installation, maintenance or service work. Install the RemoteVision module before placing the appliance in its installation niche. Once connected the RemoteVision module will increase the energy consumption of - Miele F 1471 SF | Operating and Installation manual - Page 63
. If the indicator light does not come on, installation of the module was unsuccessful. In that case, repeat the process. If that does not correct the problem, contact Miele. ^ Pull the antenna d straight out. ^ Guide the cover b over the antenna d and screw on the cover. ^ Angle the antenna - Miele F 1471 SF | Operating and Installation manual - Page 64
-tip brackets b on the left and right walls of the appliance niche. ^ Mark the holes through the anti-tip brackets b on the floor of the installation niche. ^ Set the brackets aside. Assure that there are no electrical wires or plumbing in the area which the screws could penetrate - risk of injury - Miele F 1471 SF | Operating and Installation manual - Page 65
Installing the appliance In a cabinet with a back wall ^ Drill pilot holes: - 1/8" (3 mm) for 5 x 60 mm wood screws - 1/16" (2 mm) for 4 x 15 mm wood screws ^ Tightly secure - Miele F 1471 SF | Operating and Installation manual - Page 66
, always screw the wooden beam to existing studs. ^ Mark the installation height (lower edge of the beam) on the rear wall of the ^ Attach the wooden beam to the rear wall of the niche. Now prepare the water connection from the appliance to the main supply line (see "Plumbing"). - The wooden beam - Miele F 1471 SF | Operating and Installation manual - Page 67
installation niche If a side-by-side installation is desired, connect the two appliances together. See the Installation Manual . In the case of side-by-side installations, a separate outlet must be used for attempting to slide the appliance into the installation niche - for example, because the floor - Miele F 1471 SF | Operating and Installation manual - Page 68
Installing the appliance Aligning the appliance ^ Align the appliance with the surrounding right. - Unscrew the height-adjustable feet until the mark on the base has reached the indicated guide dimension 1 1/4" (32 mm). The guide dimension of 1 1/4" (32 mm) is related to a niche height of 84" (2134 - Miele F 1471 SF | Operating and Installation manual - Page 69
appliance Attaching the appliance to the installation niche Attaching the toe-kick cover The maximum height wooden beam to fit exactly and place it in the gap. Now connect the water supply to the appliance (see "Plumbing"). ^ Attach the plinth to the appliance, and put the included cover - Miele F 1471 SF | Operating and Installation manual - Page 70
Installing the appliance ^ Attach the toe-kick cover to the plinth. Mounting the air separator The air separator on the inside of the freezer door keeps - Miele F 1471 SF | Operating and Installation manual - Page 71
necessary the depth of the Ice/Water dispenser can be aligned from inside the custom door cut-out. This allows the dispenser to be aligned with the custom door to achieve the best possible appearance. ,Disconnect the appliance from the power supply. Installing the appliance ^ Remove the cover and - Miele F 1471 SF | Operating and Installation manual - Page 72
Installing the appliance Once the drip tray has been removed, the four metal strips can be used to align the Ice/Water Dispenser. ^ Pull the rear cover forward and out. ^ Loosen the water sensors and carefully bend them upwards. ^ Loosen the screws of the four metal strips. ^ Insert a screwdriver - Miele F 1471 SF | Operating and Installation manual - Page 73
Attaching the frame and the shelf Installing the appliance The word "TOP" is marked on the rear of the frame at the top. For 3/4" (19 mm) thick custom doors: ^ Slide the cover frame onto the Ice/Water Dispenser and press until it is flush with the door front. For 1 1/2" / (38 mm) thick custom - Miele F 1471 SF | Operating and Installation manual - Page 74
120 psi (1.72-8.25 bar). - A separate shut-off valve must be installed, so that the water supply can be interrupted as needed. - The maximum outer diameter of the water pipe (without fittings): 3/8" (10 mm). The shut-off valve for the water connection must not be located behind the appliance. It is - Miele F 1471 SF | Operating and Installation manual - Page 75
with a hose guide The connection to the household water supply must be installed before the appliance is installed. ^ Turn off the main water valve to prevent damage caused by leaking water. ^ Attach the connecting pipe to the shut-off valve, according to the instructions supplied by the - Miele F 1471 SF | Operating and Installation manual - Page 76
pipe to the solenoid valve of the appliance, follow the instructions supplied by the manufacturer of the ice cube maker installation kit. When bending the water pipe, be sure not to kink it, otherwise there is a risk of leaks and water damage. Use bending aids. ^ Push the union nut and seal onto - Miele F 1471 SF | Operating and Installation manual - Page 77
Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. Improper checked by a qualified electrician or service technician. Installation, repairs and other work by unqualified Miele Technical Service. U1-800-999-1360 V1-800-565-6435 77 - Miele F 1471 SF | Operating and Installation manual - Page 78
access to your appliance to fix the problem. For information on set-up and installation of the RemoteVision module see the "Installation" section of this manual. Be sure your wireless system meets the following requirements - A wireless router that supports an IEEE 802.11b protocol - Windows XP - Miele F 1471 SF | Operating and Installation manual - Page 79
connected to the network when ; # appears in the display. If ; # does not appear, refer to the "Network options" section of the XKM 2000 Installation Instruction manual. ^ Press and hold the access button "p" for 2 seconds to confirm the change. ^ To return to the main menu, tap the X button until - Miele F 1471 SF | Operating and Installation manual - Page 80
the module Reset to factory settings Enter Ad-Hoc Mode Note: If you cannot select any option (other than ; - "Back", the module has not been installed correctly. 80 - Miele F 1471 SF | Operating and Installation manual - Page 81
81 - Miele F 1471 SF | Operating and Installation manual - Page 82
82 - Miele F 1471 SF | Operating and Installation manual - Page 83
83 - Miele F 1471 SF | Operating and Installation manual - Page 84
Alteration rights reserved / 4911 M.-Nr. 09 169 330 / 02 INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
 |
 |
Operating and Installation
Instructions
Freezer
with Ice/Water Dispenser
F 1471 SF
To prevent accidents
and appliance damage
read these instructions
before
installation or use.
M.-Nr. 09 169 330
en - US, CA