Miele F 1801 Vi Operating and Installation manual
Miele F 1801 Vi Manual
 |
View all Miele F 1801 Vi manuals
Add to My Manuals
Save this manual to your list of manuals |
Miele F 1801 Vi manual content summary:
- Miele F 1801 Vi | Operating and Installation manual - Page 1
Operating and Installation Instructions Freezer with Ice Maker F 1801 Vi, F 1811 Vi F 1901 Vi, F 1911 Vi To prevent accidents and appliance damage read these instructions before installation or use. en - US, CA M.-Nr. 09 168 930 - Miele F 1801 Vi | Operating and Installation manual - Page 2
Contents IMPORTANT SAFETY INSTRUCTIONS 4 Guide to the freezer 8 Before use 10 Turning the appliance On/Off 10 Settings 11 Using the settings 11 Additional settings 11 change 32 Using an external water filter 32 Lead free certificate 35 Frequently asked questions 36 After sales service 43# - Miele F 1801 Vi | Operating and Installation manual - Page 3
Contents Caring for the environment 46 Installation 47 Installation site 47 Stainless steel panels 49 Custom door panels 49 Installation options 49 Dimensions 52 Niche dimensions 53 Installing the appliance 55 Before you begin 55 RemoteVision module installation 57 Preparing the - Miele F 1801 Vi | Operating and Installation manual - Page 4
instructions before installation and use to prevent accidents and machine damage. This appliance is intended for residential use only. Use only as described in this Operating manual qualified electrician if in doubt. ~ Before installation or service, disconnect the power supply to the work area by - Miele F 1801 Vi | Operating and Installation manual - Page 5
with the installation instructions. ~ Installation and repair work should be performed by a Miele authorized service technician. Work by . Do not place fingers or hands on the automatic ice making mechanism while the freezer is plugged in. ~ The ice cube maker is not suitable for connection to - Miele F 1801 Vi | Operating and Installation manual - Page 6
or experience with the machine should not use it without supervision or instruction by a responsible person. ~ To reduce the risk of injury, the door hinge area. ~ After your freezer is in operation, do not touch the cold surfaces in the freezer compartment, particularly when hands are damp or wet - Miele F 1801 Vi | Operating and Installation manual - Page 7
IMPORTANT SAFETY INSTRUCTIONS Disposal of your old appliance ~ Before disposing of an old appliance, scratching the surface coating. Splashes of refrigerant can damage the eyes. ~ Your old freezer may have a cooling system that used CFCs (chlorofluorocarbons). CFCs are believed to harm stratospheric - Miele F 1801 Vi | Operating and Installation manual - Page 8
Guide to the freezer a Door shelves (height adjustable) b Shelves (height adjustable) c Ice cube maker d Ice cube container e Control panel f Main switch to turn the appliance On/Off g Freezer baskets h Water filter 8 - Miele F 1801 Vi | Operating and Installation manual - Page 9
Control panel Guide to the freezer a Access button "p" b Temperature display X colder; Y warmer Allows you to set the desired temperature in the freezer c On/Off sensor button for the SuperCool function d On/Off sensor button for the ice cube maker e Sensor button for the temperature and door - Miele F 1801 Vi | Operating and Installation manual - Page 10
Before use Before using for the first time ^ Clean the inside of the appliance and the accessories with a mild solution of warm water and liquid dish soap. Dry with a soft cloth. Turning the appliance On/Off ^ Open the appliance door. If the appliance was transported to the installation site - Miele F 1801 Vi | Operating and Installation manual - Page 11
adjust the temperature, - select the SuperCool function, or - turn the ice maker On/Off. For additional information, see the corresponding sections in this manual. ^ To leave the settings menu, touch the access button "p" so it turns white. The last settings entered are stored. If the access button - Miele F 1801 Vi | Operating and Installation manual - Page 12
menu. ^ Touch the access button "p" to confirm the setting. ^ Tap the X button until you see ; in the display. ^ Touch the access button "p". You have now left the Custom settings mode. When you are in the Custom settings mode the door alarm is turned off automatically. Once the door is closed it - Miele F 1801 Vi | Operating and Installation manual - Page 13
Turning off for longer periods of time If the appliance is not going to be used for an extended time (for example, during a vacation) some precautions need to be taken: ^ Shut off the water supply line, (several hours before switching off the appliance) ^ Take all food out of the appliance ^ Turn - Miele F 1801 Vi | Operating and Installation manual - Page 14
the highest temperature reached during the alarm. If the temperature in the freezer zone reaches 0°F (-18°C) or higher, check that food has not of food are being frozen at once. Door alarm If the appliance door is left open, an alarm signal will sound and the "alarm" indicator will turn red - Miele F 1801 Vi | Operating and Installation manual - Page 15
Setting the temperature Setting the temperature ^ Touch the access button "p" so it turns yellow. ^ Use the X and Y buttons next to the temperature display to set the temperature warmer or colder. Tap the X and Y sensor buttons to raise/lower the temperature 1°, or hold it down to move through the - Miele F 1801 Vi | Operating and Installation manual - Page 16
to menu. ^ Touch the access button "p" to confirm the setting. ^ Tap the X button until a ; appears in the display. ^ Touch the access button "p". You have left the Custom settings mode. When you are in the Custom settings mode the door alarm is turned off automatically. Once the door is closed it - Miele F 1801 Vi | Operating and Installation manual - Page 17
. Consume defrosted food as soon as possible, it will lose its nutritional value and spoil if left for too long. Do not refreeze defrosted food unless it has been cooked. Before placing food in the freezer ^ When you are planning to freeze large amounts of food (more than 4 ½ lbs [2 kg]), switch on - Miele F 1801 Vi | Operating and Installation manual - Page 18
food cold), To cool drinks quickly, switch on the SuperCool function, see "SuperCool" for more information. Do not leave bottles in the freezer for more than 1 hour, closed containers could burst. - in a steam oven. Poultry It is especially important to observe proper hygiene when defrosting - Miele F 1801 Vi | Operating and Installation manual - Page 19
fish, vegetables, herbs, fresh fruit, pastry/dough, leftovers, and a range of pre-cooked meals. - Do not place hot foods or drinks in the freezer. This causes already frozen food to thaw, and increases the energy consumption considerably. Allow hot foods and drinks to cool down before placing them - Miele F 1801 Vi | Operating and Installation manual - Page 20
is ideal for freezing large quantities of unfrozen food. Ideally the function should be switched on 4 - 6 hours before the food is placed in the freezer. If the max. freezing capacity is used, 24 hours are recommended. This helps food to freeze quickly and retain its nutrients, vitamins, flavor and - Miele F 1801 Vi | Operating and Installation manual - Page 21
maker. This applies for the very first use, and whenever the appliance has been out of service for an extended period of time. The amount of ice cubes produced depends on the temperature in the freezer section. The lower the temperature, the more ice cubes will be produced in a given period of - Miele F 1801 Vi | Operating and Installation manual - Page 22
moisture generated in the appliance collects in the evaporator. It is automatically defrosted and dissipated by the condenser periodically. This automatic defrosting system enables the freezer to remain permanently ice-free, while ensuring that the food stored in the - Miele F 1801 Vi | Operating and Installation manual - Page 23
turn the safety lock to a horizontal position a. ^ On both sides of the basket, pull the latches b upward and lift the basket out of the freezer. Replacing the freezer basket ^ Fully extend the telescopic tracks. ^ Lay the basket onto the tracks so that it connects in the front and back. ^ Turn the - Miele F 1801 Vi | Operating and Installation manual - Page 24
is felt. ^ On both sides of the container, pull the latches (see arrow) upward and lift the container out of the freezer. Push the tracks back into the freezer to avoid injury. Replacing the ice cube container ^ Completely extend the telescopic tracks. ^ Lay the container onto the tracks so that - Miele F 1801 Vi | Operating and Installation manual - Page 25
electronic unit or lights. The data plate located inside the appliance must not be removed. It contains information which is required in the event of a service call. 25 - Miele F 1801 Vi | Operating and Installation manual - Page 26
Cleaning and care Before cleaning Aluminum frames The shelf frames and the door baskets are made of aluminum. ^ Clean the frames with a mild solution of warm water and liquid dish soap. ^ Use the main switch to turn the appliance off completely. The main switch is located on the right side - Miele F 1801 Vi | Operating and Installation manual - Page 27
it on with the main switch. ^ Turn on the SuperCool function. The freezer section will cool down quickly. ^ Once the temperature is cold enough, place the freezer baskets containing the frozen food into the freezer. ^ Turn off the SuperCool function on a temperature of 0 °F (-18 °C) is reached. 27 - Miele F 1801 Vi | Operating and Installation manual - Page 28
Cleaning and care Changing the light bulb The lighting automatically switches off after the door has been open for approx. 5 minutes. This is not a fault. After the bulb has cooled for a short time it will turn on again. If the light does not come on when the door is opened briefly, the light bulb - Miele F 1801 Vi | Operating and Installation manual - Page 29
Side lighting Cleaning and care ^ Turn the light cover counterclockwise and pull out. Never touch a halogen bulb with bare fingers. When inserting a glass halogen bulb always hold with a soft cloth. ^ Pull the defective light bulb from the socket. ^ Place the new bulb in the socket. Halogen bulb - Miele F 1801 Vi | Operating and Installation manual - Page 30
ice maker has not been used for a prolonged time discard any ice cubes in the freezer, empty the container and discard the ice production of the next 24 hours. Additional water filters are available from Miele. It is important to change the water filter regularly. - If the appliance or ice maker - Miele F 1801 Vi | Operating and Installation manual - Page 31
Exchanging the water filter Note: Air trapped in the system may cause water and the filter cartridge to eject forcefully. Use caution when removing. Water filter ^ Remove the cap from the used filter, 3. ^ Take a new filter cartridge out of the packaging and remove the protective cap. ^ Push the - Miele F 1801 Vi | Operating and Installation manual - Page 32
Water filter ^ After the filter change the filter indicator in the display still flashes. The change must be be confirmed in the electronic. Using an external water filter If your household water supply already has an external water filter installed, leave the standard water filter (bypass - Miele F 1801 Vi | Operating and Installation manual - Page 33
Health Water Treatment Device Certificate Number Trademark/Model Designation 9000 077095 Miele 07134220 Manufacturer: Cuno, Incorporated 06 - 1775 Date Issued: March None Inorganic/Radiological Contaminants None Rated Service Capacity: 740 gals Rated Service Flow: 0.75 gpm Conditions of - Miele F 1801 Vi | Operating and Installation manual - Page 34
207 - 827 kPa) Water temperature* 33°F - 100°F (0.6°C - 38°C) Service flow 0.75 gpm (2.83 lpm) IMPORTANT: Must be installed and operated in due to water leakage, you MUST read and follow these operating instructions before installation and use of this product. For estimated costs of replacement - Miele F 1801 Vi | Operating and Installation manual - Page 35
Lead free certificate This product F 1801 Vi, F 1811 Vi (KIMSDF30US) / F 1901 Vi, F 1911 Vi (KIMSDF36US) is tested and certified by WQA against ORD0902 for California "lead free" compliance. Miele & Cie. KG Carl-Miele-Straße 29 D-33332 Gütersloh 35 - Miele F 1801 Vi | Operating and Installation manual - Page 36
the following guide minor problems can be corrected without a service call. appliance or the outlet may be defective. Contact Miele or a qualified electrician. The temperature is set Check the temperature to same time. fall automatically. The freezer is too warm. The room temperature is lower - Miele F 1801 Vi | Operating and Installation manual - Page 37
problems Issue Possible fault Solution Water is flowing out of Close the shut-off valve immediately. the appliance. Check whether the water Contact Miele Technical pipe in the appliance is Service for too long. The door has been Once the freezer gets opened too frequently, or a down to the - Miele F 1801 Vi | Operating and Installation manual - Page 38
the "alarm" indicator will stop flashing. The filter display is red. This is a warning that the Order replacement filters water filter needs to be from Miele. changed soon. The filter display is flashing red. The water filter needs to See "Exchanging the be changed. water filter". 38 - Miele F 1801 Vi | Operating and Installation manual - Page 39
Problems (purged of air) before the appliance was used for the first time. Contact Miele. Check if: - the ice cube maker is switched on. See "Ice Cube exit. - the ice cube container is in the right position. - the freezer compartment temperature is too high. - the water pressure is too low. The - Miele F 1801 Vi | Operating and Installation manual - Page 40
Frequently asked questions Problems with the ice maker Issue Possible fault Solution The ice cubes if the ice cube container is dirty. Clean the container. Unsealed packages in the freezer will transfer odor/flavor particles to the ice cubes. Check that food has been packed in airtight - Miele F 1801 Vi | Operating and Installation manual - Page 41
Frequently asked questions Problems with the ice maker Issue Possible fault The ice maker is not producing enough ice or the ice cubes are misshapen. Check the water pressure. The water pressure must be between 25 and 120 psi (1.72-8.25 bar). Check that the freezer temperature is too high. - Miele F 1801 Vi | Operating and Installation manual - Page 42
Frequently asked questions The appliance is making noises. Issue Possible fault Solution Brrrrr... Blubb, blubb... Humming noise made by the compressor. This noise can get louder for brief periods when the motor is switching on. A gurgling noise can be heard when coolant is circulating through - Miele F 1801 Vi | Operating and Installation manual - Page 43
by 5 years of worry-free ownership. MieleCare is the only Extended Service Contract in the industry that guarantees repairs by a Miele Authorized Service Provider using genuine Miele parts. Only genuine Miele parts installed by factory-trained professionals can guarantee the safety, reliability and - Miele F 1801 Vi | Operating and Installation manual - Page 44
44 - Miele F 1801 Vi | Operating and Installation manual - Page 45
Installation instructions Information is subject to change. Please refer to our website to obtain the most current product specification, technical & warranty information. To prevent accidents and machine damage read these instructions before installation or use. - Miele F 1801 Vi | Operating and Installation manual - Page 46
Caring for the environment Disposal of packing materials The cardboard box and packing materials are biodegradable and recyclable. Please recycle. Ensure that any plastic wrappings, bags, etc., are disposed of safely and kept out of the reach of babies and young children. Danger of suffocation! - Miele F 1801 Vi | Operating and Installation manual - Page 47
until the appliance is completely installed and secured as per the installation instructions. Do not install the appliance: - outdoors - in an oven, radiator, etc. Empty weight of your machine: F 18X1 Vi 421 lbs (191 kg) F 19X1 Vi 459 lbs (208 kg) The ambient temperature should not drop below - Miele F 1801 Vi | Operating and Installation manual - Page 48
. weight of a fully loaded machine is: F 18X1 Vi 950 lbs (430 kg) F 19X1 Vi 1,125 lbs (510 kg) To ensure that the appliance Miele. The air intake and outlet must not be blocked or covered in any way. They also need to be dusted/cleaned on a regular basis. Installation niche To ensure safe, trouble - Miele F 1801 Vi | Operating and Installation manual - Page 49
must not exceed the following: F 18X1 Vi 106 lbs (48 kg) F 19X1 Vi 79 lbs (36 kg) Fitting a door freezer using a "Merging Kit". The "Merging Kit" is available from Miele. Contact Miele or your dealer for specific information about which combinations will work with your appliance. For instructions - Miele F 1801 Vi | Operating and Installation manual - Page 50
installed within its own niche using the mounting accessories included. The "Merging Kit" will also be needed. The "Merging Kit" is available from Miele. Installation with partition without using the "Merging Kit" If there is a partition with a thickness of more than 6 5/16" (160 mm) between the - Miele F 1801 Vi | Operating and Installation manual - Page 51
can be attached instead of one large door. To connect these doors on the rear, a metal strip can be purchased as an optional accessory. Contact Miele. When attaching the metal strip to the furniture doors, observe the maximum length of the screws and the position of the drill holes. Always screw - Miele F 1801 Vi | Operating and Installation manual - Page 52
handle* Door handle* D 14 5/16" (363 mm) 16 7/8" (428 mm) *The dimensions of the door fronts and handles will vary according to each individual kitchen. Miele recommends using the full door opening angle of 115° for this freezer. 52 - Miele F 1801 Vi | Operating and Installation manual - Page 53
Niche dimensions Dimensions Niche width (A) F 18X1 Vi 30" (762 mm) F 19X1 Vi 36" (915 mm) 53 - Miele F 1801 Vi | Operating and Installation manual - Page 54
Dimensions Power supply and water connection F 18X1 Vi F 19X1 Vi A 15" (381 mm) 18" (458 mm) Door front dimensions 1. Power supply 2. Water connecti A F 18X1 Vi 79 1/8" 2029 mm F 19X1 Vi 79 1/8" 2029 mm B 29 3/4" 756 mm 35 3/4" 908 mm 4" - 5 3/16" (102 - 132 mm) 54 - Miele F 1801 Vi | Operating and Installation manual - Page 55
the risk of injury or damage to the product, two people should be used for installation. These installation instructions are intended for use by qualified installers. In addition to these instructions, the appliance must be installed in accordance with all local codes. In the absence of a local code - Miele F 1801 Vi | Operating and Installation manual - Page 56
Installing the appliance Aligning the housing unit Check the installation niche To ensure a safe, trouble-free installation and the best possible cosmetic result, check to be sure that the installation space complies with the installation requirements. The housing unit must - Miele F 1801 Vi | Operating and Installation manual - Page 57
on the ground it can be wheeled around. ^ Do not remove the installation supports from the appliance door. They will be used later in the installation niche. the power supply when performing installation, maintenance or service work. Install the RemoteVision module before placing the appliance - Miele F 1801 Vi | Operating and Installation manual - Page 58
. If that does not correct the problem, contact Miele. ^ Pull the antenna d straight out. ^ Guide the cover b over the antenna d and screw on the cover. ^ Angle the antenna d so that it faces to the right or left - Miele F 1801 Vi | Operating and Installation manual - Page 59
to prevent tipping. Two anti-tip brackets are recommended for each appliance or appliance combination (side-by-side). ^ Position the anti-tip brackets b on the left and right walls of the appliance niche. ^ Mark the holes through the anti-tip brackets b on the floor of the installation niche. ^ Set - Miele F 1801 Vi | Operating and Installation manual - Page 60
Installing the appliance ^ Drill pilot holes: In a cabinet with a back wall - 1/8" (3 mm) for 5 x 60 mm wood screws - 1/16" (2 mm) for 4 x 15 mm wood screws ^ Tightly secure the anti-tip brackets in the niche. Be certain that the screws penetrate through the flooring and into the wall plate a - Miele F 1801 Vi | Operating and Installation manual - Page 61
Installing the appliance Securing an alternative anti-tip device If the anti-tip brackets cannot be attached securely, an alternative anti-tip device can be used. Ensure that there is no "give" between the appliance and the anti-tip device. If possible, always screw the wooden beam to existing - Miele F 1801 Vi | Operating and Installation manual - Page 62
Sliding the appliance into the installation niche If a side-by-side installation is desired, connect the two appliances together. See the Installation Manual included with the "Merging Kit". ^ Plug the appliance into the power outlet b. The plug of the appliance should be easily accessible after - Miele F 1801 Vi | Operating and Installation manual - Page 63
left and right. - Unscrew the height-adjustable feet until the mark on the base has reached the indicated guide dimension 1 1/4" (32 mm). The guide : - When unscrewing the height-adjustable feet, proceed gradually, alternating between left and right. - If using a wooden beam as an alternative anti- - Miele F 1801 Vi | Operating and Installation manual - Page 64
Installing the appliance Attaching the appliance to the installation niche ^ Secure the attachment plate side lugs. ^ Screw the attachment plate lugs h to the overhead furniture/fixtures. If there is no way to attach the top of the appliance, it can be attached to the sides of the installation - Miele F 1801 Vi | Operating and Installation manual - Page 65
one long filler strip: ^ Take the peg from the "Side-by-side Merging Kit" and insert it halfway into the filler strip rail on the left-side appliance. ^ Place the second filler strip on the peg and press both filler strips together. ^ Insert both filler strips into the installation space above - Miele F 1801 Vi | Operating and Installation manual - Page 66
Installing the appliance Preparing the custom door ^ Open the appliance door. ^ Unscrew the installation supports n from the appliance door. ^ Loosen the remaining screws from the strips o on each side of the door, then remove. ^ Set aside the screws and side - Miele F 1801 Vi | Operating and Installation manual - Page 67
Installing the appliance ^ Mark the distance X on the back-side of the custom door. ^ Also calculate and mark the center of the custom door Y. ^ Remove the mounting frame from the appliance door and position it according to the markings on the custom door. ^ Pre-drill the holes. ^ Tightly screw on - Miele F 1801 Vi | Operating and Installation manual - Page 68
Installing the appliance Attaching and aligning the custom door front ^ Align the custom door height with the threaded bolts p. ^ Now tighten the nuts q on top. This secures the appliance door. ^ Open the door and hang the custom door with the mounting frame over the threaded bolts p. ^ Put the side - Miele F 1801 Vi | Operating and Installation manual - Page 69
Attaching the fixing brackets (Only for appliances using the "Front panel gap kit".) Installing the appliance Attaching the covers The fixing brackets are used to secure the custom door front to the bottom of the appliance door. ^ Open the appliance door all the way. ^ Slightly loosen the screw - Miele F 1801 Vi | Operating and Installation manual - Page 70
Installing the appliance Attaching the toe-kick cover The maximum height of the toe-kick cover is 4" from the top of the floor. Do not cover the ventilation slits in the plinth. Risk of damage to the appliance. ^ If required, cut the toe-kick cover to the required length and height. ^ Insert the - Miele F 1801 Vi | Operating and Installation manual - Page 71
Mounting the air separator The air separator keeps the supply and exhaust air separate. This prevents warm exhaust air from flowing into the machine, optimizing the energy performance of the unit. Installing the appliance ^ Position the air separator in the center of the appliance door. ^ From - Miele F 1801 Vi | Operating and Installation manual - Page 72
Plumbing All plumbing work should be carried out by a suitably qualified and competent person, in accordance with all applicable local and national regulations. The water quality must conform to country requirements for drinking water. - The appliance is only suitable for connection to the cold - Miele F 1801 Vi | Operating and Installation manual - Page 73
guide The connection to the household water supply must be installed before the appliance is installed. ^ Turn off the main water valve to prevent damage caused by leaking water. ^ Attach the connecting pipe to the shut-off valve, according to the instructions through the hose guide at the back - Miele F 1801 Vi | Operating and Installation manual - Page 74
Plumbing Connecting the water supply When connecting the water pipe to the solenoid valve of the appliance, follow the instructions supplied by the manufacturer of the ice cube maker installation kit. When bending the water pipe, be sure not to kink it, otherwise there is a - Miele F 1801 Vi | Operating and Installation manual - Page 75
- Do not use an adapter. - Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. Improper connection of the equipment grounding conductor may a licensed electrician or call the Miele Technical Service. U1-800-999-1360 V1-800-565-6435 75 - Miele F 1801 Vi | Operating and Installation manual - Page 76
Miele's client service center will be notified and contact you, or another trusted individual identified on your call roster, in order to gain access to your appliance to fix the problem , exact router setup instructions are not included in this manual. Wording and instructions may vary. 76 - Miele F 1801 Vi | Operating and Installation manual - Page 77
appear, refer to the "Network options" section of the XKM 2000 Installation Instruction manual. ^ Press and hold the access button "p" for 2 seconds to confirm appears in the display. ^ Touch the access button "p". You have left the Custom settings mode. When you are in the Custom settings mode - Miele F 1801 Vi | Operating and Installation manual - Page 78
RemoteVision (optional accessory) MasterCool control panel options for RemoteVision Status indicators Description of function Flashing ; ~ Module booting phase Flashing ; ‡ Not connected to network Flashing ; | Connection to network established, no IP address assigned Solid ; # Connected to network - Miele F 1801 Vi | Operating and Installation manual - Page 79
79 - Miele F 1801 Vi | Operating and Installation manual - Page 80
Alteration rights reserved / 4811 M.-Nr. 09 168 930 / 02 INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
 |
 |
Operating and Installation
Instructions
Freezer
with Ice Maker
F 1801 Vi, F 1811 Vi
F 1901 Vi, F 1911 Vi
To prevent accidents
and appliance damage
read these instructions
before
installation or use.
M.-Nr. 09 168 930
en - US, CA