Miele F 1811 SF Operating and Installation manual
Miele F 1811 SF Manual
 |
View all Miele F 1811 SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Miele F 1811 SF manual content summary:
- Miele F 1811 SF | Operating and Installation manual - Page 1
Operating and Installation Instructions Freezer with Ice Maker F 1801 SF, F 1811 SF F 1901 SF, F 1911 SF To prevent accidents and appliance damage read these instructions before installation or use. en - US, CA M.-Nr. 09 169 350 - Miele F 1811 SF | Operating and Installation manual - Page 2
Contents IMPORTANT SAFETY INSTRUCTIONS 4 Guide to the freezer 8 Before use 10 Turning the appliance On/Off 10 Settings 11 Using the settings 11 Additional settings 11 Turning the button sound - Miele F 1811 SF | Operating and Installation manual - Page 3
Contents Frequently asked questions 36 After sales service 43 Caring for the environment 46 Installation 47 Installation site 47 Stainless steel panels 49 Installation options 49 Dimensions 51 Niche dimensions 52 Installing the - Miele F 1811 SF | Operating and Installation manual - Page 4
instructions before installation and use to prevent accidents and machine damage. This appliance is intended for residential use only. Use only as described in this Operating manual doubt. ~ Before installation or service, disconnect the power supply to an effective grounding system. It is imperative - Miele F 1811 SF | Operating and Installation manual - Page 5
. ~ This appliance must be installed and connected in compliance with the installation instructions. ~ Installation and repair work should be performed by a Miele authorized service technician. Work by unqualified persons could be dangerous and may void the warranty. ~ Installation must comply - Miele F 1811 SF | Operating and Installation manual - Page 6
~ Persons who lack physical, sensory or mental abilities, or experience with the machine should not use it without supervision or instruction by a responsible person. ~ To reduce the risk of injury, do not allow children to play in, on or near the appliance, especially in the door - Miele F 1811 SF | Operating and Installation manual - Page 7
IMPORTANT SAFETY INSTRUCTIONS Disposal of your old appliance ~ Before disposing of an old appliance, Splashes of refrigerant can damage the eyes. ~ Your old freezer may have a cooling system that used CFCs (chlorofluorocarbons). CFCs are believed to harm stratospheric ozone. If you intentionally - Miele F 1811 SF | Operating and Installation manual - Page 8
Guide to the freezer a Door shelves (height adjustable) b Shelves (height adjustable) c Ice cube maker d Ice cube container e Control panel f Main switch to turn the whole appliance On/Off g Freezer baskets h Water filter 8 - Miele F 1811 SF | Operating and Installation manual - Page 9
Control panel Guide to the freezer a Access button "p" activates the control panel b Temperature display X colder; Y warmer Allows you to set the desired temperature in the freezer c On/Off - Miele F 1811 SF | Operating and Installation manual - Page 10
Before use Before using for the first time The stainless steel surface of the appliance is protected with a plastic film, which protects it during shipping. Do not remove this protective film until the appliance has been completely installed. After removing the protective film clean the exterior - Miele F 1811 SF | Operating and Installation manual - Page 11
will appear yellow. In settings mode, certain settings can be changed. The function possibilities are described in the respective chapters of this manual. Overview of the selectable function settings: ^ Touch the access button "p" so it turns yellow. On the control panel you will see additional - Miele F 1811 SF | Operating and Installation manual - Page 12
Settings Turning the button sound On/Off If you prefer the buttons to be silent when touched the button sound can be turned off. ^ While holding down the X button, press the access button "p" once. Keep holding the X button down until the following appears in the display (approx. 5 seconds). ^ - Miele F 1811 SF | Operating and Installation manual - Page 13
Turning off for longer periods of time If the appliance is not going to be used for an extended time (for example, during a vacation) some precautions need to be taken: ^ Shut off the water supply line, (several hours before switching off the appliance) ^ Take all food out of the appliance ^ Turn - Miele F 1811 SF | Operating and Installation manual - Page 14
ensure that the temperature does not rise unnoticed because of energy loss or an open door. The alarm system is always operational, it does not need to be switched on. Turning the temperature alarm Off As soon as the alarm condition is corrected, the - Miele F 1811 SF | Operating and Installation manual - Page 15
Setting the temperature Setting the temperature ^ Touch the access button "p" so it turns yellow. ^ Use the X and Y buttons next to the temperature display to set the temperature warmer or colder. Tap the X and Y sensor buttons to raise/lower the temperature 1°, or hold it down to move through the - Miele F 1811 SF | Operating and Installation manual - Page 16
Setting the temperature Temperature unit (Fahrenheit/Celsius) The temperature can be displayed in degrees Fahrenheit (°F) or Celsius (°C). ^ While holding down the X button, press the access button "p" once. Keep holding the X button down until the following appears in the display (approx. 5 - Miele F 1811 SF | Operating and Installation manual - Page 17
cold air. Placing food in the freezer Food to be frozen can be placed anywhere in the freezer. Load bearing capacity of the baskets: F 18X1Vi/SF F 19X1Vi/SF Small basket 72 lbs (33 kg) 94 lbs (43 kg) Large basket 72 lbs (33 kg) 94 lbs (43 kg) ^ Spread the food to - Miele F 1811 SF | Operating and Installation manual - Page 18
Using the freezer efficiently Defrosting Cooling drinks quickly Frozen food can be defrosted in different ways: - in a microwave oven, - at room temperature, - in the refrigerator (the cold given off by the frozen food helps to keep the other food cold), To cool drinks quickly, switch on the - Miele F 1811 SF | Operating and Installation manual - Page 19
Using the freezer efficiently Freezing tips - The following are examples of foods suitable for freezing: Fresh meat, poultry, game, fish, vegetables, herbs, fresh fruit, pastry/dough, leftovers, and a range of pre-cooked meals. - Do not place hot foods or drinks in the freezer. This causes already - Miele F 1811 SF | Operating and Installation manual - Page 20
SuperCool When the SuperCool function is activated, the appliance is cooled as cold as possible (to a factory-preset temperature). SuperCool The SuperCool function is ideal for freezing large quantities of unfrozen food. Ideally the function should be switched on 4 - 6 hours before the food is - Miele F 1811 SF | Operating and Installation manual - Page 21
first 24 hours after switching on the ice cube maker. This applies for the very first use, and whenever the appliance has been out of service for an extended period of time. As soon as the freezer has cooled to a freezing temperature, the ice cube container fills with water. Cold air - Miele F 1811 SF | Operating and Installation manual - Page 22
. The moisture generated in the appliance collects in the evaporator. It is automatically defrosted and dissipated by the condenser periodically. This automatic defrosting system enables the freezer to remain permanently ice-free, while ensuring that the food stored in the freezer stays frozen. 22 - Miele F 1811 SF | Operating and Installation manual - Page 23
Adjusting the interior fittings Moving the shelves The shelves can be adjusted according to the height of the food. ^ Using both hands, grasp the shelf from underneath and lift slightly so that the rear of the shelf is slightly above the mountings. ^ Pull the shelf forward. ^ Move the shelf to the - Miele F 1811 SF | Operating and Installation manual - Page 24
Adjusting the interior fittings Ice cube container The ice cube container is set on telescopic tracks, and can be removed for loading, unloading and cleaning. ^ Slide the container forward until resistance is felt. ^ On both sides of the container, pull the latches (see arrow) upward and lift the - Miele F 1811 SF | Operating and Installation manual - Page 25
to appear. Stainless steel surfaces can be cleaned using a non-abrasive stainless steel cleaner (available from Miele). Only use a mild solution of warm water and liquid dish soap to clean this appliance. To be removed. It contains information which is required in the event of a service call. 25 - Miele F 1811 SF | Operating and Installation manual - Page 26
Cleaning and care Before cleaning ^ Use the main switch to turn the appliance off completely. The main switch is located on the right side underneath the control panel. ^ Unplug the power cord. ^ Remove any food from the appliance and store it in a cool place. ^ Take out any removable parts, e.g., - Miele F 1811 SF | Operating and Installation manual - Page 27
Cleaning and care Ventilation slits ^ Check the ventilation slits in the base panel regularly. Remove any dirt/dust with a vacuum cleaner or brush. Clean as needed. Door seals Do not use any oils or grease on the door seals. This may cause the seals to deteriorate and become porous over time. ^ - Miele F 1811 SF | Operating and Installation manual - Page 28
Cleaning and care Changing the light bulb The lighting automatically switches off after the door has been open for approx. 5 minutes. This is not a fault. After the bulb has cooled for a short time it will turn on again. If the light does not come on when the door is opened briefly, the light bulb - Miele F 1811 SF | Operating and Installation manual - Page 29
Side lighting Cleaning and care ^ Turn the light cover counterclockwise and pull out. Never touch a halogen bulb with bare fingers. When inserting a glass halogen bulb always hold with a soft cloth. ^ Pull the defective light bulb from the socket. ^ Place the new bulb in the socket. Halogen bulb - Miele F 1811 SF | Operating and Installation manual - Page 30
any ice cubes in the freezer, empty the container and discard the ice production of the next 24 hours. Additional water filters are available from Miele. It is important to change the water filter regularly. - If the appliance or ice maker have not been routinely used for several weeks or months - Miele F 1811 SF | Operating and Installation manual - Page 31
Exchanging the water filter Note: Air trapped in the system may cause water and the filter cartridge to eject forcefully. Use caution when removing. Water filter ^ Remove the cap from the used filter, 3. ^ Take a new - Miele F 1811 SF | Operating and Installation manual - Page 32
Water filter ^ After the filter change the filter indicator in the display still flashes. The change must be be confirmed in the electronic. Using an external water filter If your household water supply already has an external water filter installed, leave the standard water filter (bypass - Miele F 1811 SF | Operating and Installation manual - Page 33
Health Water Treatment Device Certificate Number Trademark/Model Designation 9000 077095 Miele 07134220 Manufacturer: Cuno, Incorporated 06 - 1775 Date Issued: March None Inorganic/Radiological Contaminants None Rated Service Capacity: 740 gals Rated Service Flow: 0.75 gpm Conditions of - Miele F 1811 SF | Operating and Installation manual - Page 34
Water temperature* 33°F - 100°F (0.6°C - 38°C) Service flow 0.75 gpm (2.83 lpm) IMPORTANT: Must be you MUST read and follow these operating instructions before installation and use of this product. adequate disinfection before or after the system. Systems certified for cyst reduction may be used - Miele F 1811 SF | Operating and Installation manual - Page 35
Lead free certificate This product F 1801 SF, F 1811 SF (KIMSDF30US) / F 1901 SF, F 1911 SF (KIMSDF36US) is tested and certified by WQA against ORD0902 for California "lead free" compliance. Miele & Cie. KG Carl-Miele-Straße 29 D-33332 Gütersloh 35 - Miele F 1811 SF | Operating and Installation manual - Page 36
of the following guide minor problems can be corrected without a service call. Repairs should again the appliance or the outlet may be defective. Contact Miele or a qualified electrician. The temperature is set Check the cooling system to switch off for too long, causing the freezer section to - Miele F 1811 SF | Operating and Installation manual - Page 37
Frequently asked questions General problems Issue Possible fault Solution Water is flowing out of Close the shut-off valve immediately. the appliance. Check whether the water Contact Miele Technical pipe in the appliance is Service. defective. Check whether the water Contact a plumber. - Miele F 1811 SF | Operating and Installation manual - Page 38
the "alarm" indicator will stop flashing. The filter display is red. This is a warning that the Order replacement filters water filter needs to be from Miele. changed soon. The filter display is flashing red. The water filter needs to See "Exchanging the be changed. water filter". 38 - Miele F 1811 SF | Operating and Installation manual - Page 39
Frequently asked questions Problems with the ice maker Issue Possible fault Solution The water supply line was not primed (purged of air) before the appliance was used for the first time. Contact Miele. Check if: - the ice cube maker is switched on. See "Ice Cube Maker" and/or "Plumbing" - Miele F 1811 SF | Operating and Installation manual - Page 40
Frequently asked questions Problems with the ice maker Issue Possible fault Solution The ice cubes are small. Other domestic appliances that use water are in operation. Avoid using such - Miele F 1811 SF | Operating and Installation manual - Page 41
Frequently asked questions Problems with the ice maker Issue Possible fault The ice maker is not producing enough ice or the ice cubes are misshapen. Check the water pressure. - Miele F 1811 SF | Operating and Installation manual - Page 42
when coolant is circulating through the pipes. These noises are not a fault. The noise of the compressor and the coolant circulating in the system is unavoidable. Click... Clicking sounds are made when the thermostat switches the compressor on and off. Sssrrrrr... On multi-zone and frost-free - Miele F 1811 SF | Operating and Installation manual - Page 43
by 5 years of worry-free ownership. MieleCare is the only Extended Service Contract in the industry that guarantees repairs by a Miele Authorized Service Provider using genuine Miele parts. Only genuine Miele parts installed by factory-trained professionals can guarantee the safety, reliability and - Miele F 1811 SF | Operating and Installation manual - Page 44
44 - Miele F 1811 SF | Operating and Installation manual - Page 45
Installation instructions Information is subject to change. Please refer to our website to obtain the most current product specification, technical & warranty information. To prevent accidents and machine damage read these instructions before installation or use. - Miele F 1811 SF | Operating and Installation manual - Page 46
Caring for the environment Disposal of packing materials The cardboard box and packing materials are biodegradable and recyclable. Please recycle. Ensure that any plastic wrappings, bags, etc., are disposed of safely and kept out of the reach of babies and young children. Danger of suffocation! - Miele F 1811 SF | Operating and Installation manual - Page 47
until the appliance is completely installed and secured as per the installation instructions. Do not install the appliance: - outdoors - in an oven, radiator, etc. Empty weight of your machine: F 18X1 SF 478 lbs (217 kg) F 19X1 SF 552 lbs (237 kg) The ambient temperature should not drop below - Miele F 1811 SF | Operating and Installation manual - Page 48
weight of a fully loaded machine is: F 18X1 SF 1,007 lbs (457 kg) F 19X1 SF 1,197 lbs (543 kg) To ensure that the Miele. The air intake and outlet must not be blocked or covered in any way. They also need to be dusted/cleaned on a regular basis. Installation niche To ensure safe, trouble - Miele F 1811 SF | Operating and Installation manual - Page 49
on how to attach the appliances and install the heating mat, please refer to the instructions included with the "Merging Kit", available from Miele. Installation without a partition using the "Merging Kit" If the appliances are installed directly next to each other (without a partition), they need - Miele F 1811 SF | Operating and Installation manual - Page 50
be individually installed within its own niche using the mounting accessories included. The "Merging Kit" will also be needed. The "Merging Kit" is available from Miele. Installation with partition without using the "Merging Kit" If there is a partition with a thickness of more than 6 5/16" (160 mm - Miele F 1811 SF | Operating and Installation manual - Page 51
Door dimensions (open 115°) Dimensions F 18X1 SF F 19X1 SF A 32 5/8" (829 mm) 38 11/16" (982 mm) B 14 5/16" (363 mm) 16 7/8" (428 mm) Miele recommends using the full door opening angle of 115° for this freezer. 51 - Miele F 1811 SF | Operating and Installation manual - Page 52
Dimensions Niche dimensions Niche width (A) F 18X1 SF 30" (762 mm) F 19X1 SF 36" (915 mm) 52 - Miele F 1811 SF | Operating and Installation manual - Page 53
Power supply and water connection Dimensions 1. Power supply 2. Water connection F 18X1 SF F 19X1 SF A 15" (381 mm) 18" (458 mm) 53 - Miele F 1811 SF | Operating and Installation manual - Page 54
be used for installation. These installation instructions are intended for use by qualified installers. In addition to these instructions, the appliance must be installed in sizes Optional accessories - "Merging Kit" for side-by-side installation - RemoteVision module for wireless monitoring 54 - Miele F 1811 SF | Operating and Installation manual - Page 55
Installing the appliance Aligning the housing unit Check the installation niche To ensure a safe, trouble-free installation and the best possible cosmetic result, check to be sure that the installation space complies with the installation requirements. The housing unit must - Miele F 1811 SF | Operating and Installation manual - Page 56
RemoteVision module installation (optional accessory) Always disconnect the appliance from the power supply when performing installation, maintenance or service work. Install the RemoteVision module before placing the appliance in its installation niche. Once connected the RemoteVision module will - Miele F 1811 SF | Operating and Installation manual - Page 57
not come on, installation of the module was unsuccessful. In that case, repeat the process. If that does not correct the problem, contact Miele. ^ Pull the antenna d straight out. ^ Guide the cover b over the antenna d and screw on the cover. ^ Angle the antenna d so that it faces to the right or - Miele F 1811 SF | Operating and Installation manual - Page 58
Installing the appliance Mounting Accessories The mounting accessories needed for installing the appliance into the niche are included in the packaging. Several plastic bags are included which are marked alphabetically. The bag needed for each step will be marked with its respective letter. The - Miele F 1811 SF | Operating and Installation manual - Page 59
Installing the appliance In a cabinet with a back wall ^ Drill pilot holes: - 1/8" (3 mm) for 5 x 60 mm wood screws - 1/16" (2 mm) for 4 x 15 mm wood screws ^ Tightly secure the anti-tip brackets in the niche. Be certain that the screws penetrate through the flooring and into the wall plate a - Miele F 1811 SF | Operating and Installation manual - Page 60
Installing the appliance Securing an alternative anti-tip device If the anti-tip brackets cannot be attached securely, an alternative anti-tip device can be used. Ensure that there is no "give" between the appliance and the anti-tip device. If possible, always screw the wooden beam to existing - Miele F 1811 SF | Operating and Installation manual - Page 61
into the installation niche If a side-by-side installation is desired, connect the two appliances together. See the Installation Manual included with the "Merging Kit". ^ Plug the appliance into the power outlet b. The plug of the appliance should be easily accessible after installation. If - Miele F 1811 SF | Operating and Installation manual - Page 62
the appliance with the surrounding cabinets. - Unscrew the height-adjustable feet until the mark on the base has reached the indicated guide dimension 1 1/4" (32 mm). The guide dimension of 1 1/4" (32 mm) is related to a niche height of 84" (2134 mm). Important! The height-adjustable feet can only - Miele F 1811 SF | Operating and Installation manual - Page 63
Installing the appliance Attaching the appliance to the installation niche Attaching the toe-kick cover The maximum height of the toe-kick cover is 4" from the top of the floor. Do not cover the ventilation slits in the plinth. Risk of damage to the appliance. ^ If required, cut the toe-kick cover - Miele F 1811 SF | Operating and Installation manual - Page 64
Installing the appliance ^ Insert the foam pieces back into the sides. ^ Position the air separator in the center of the appliance door. ^ Remove the foil from the adhesive strips. ^ Attach the toe-kick cover to the plinth. Mounting the air separator The air separator keeps the supply and exhaust - Miele F 1811 SF | Operating and Installation manual - Page 65
All plumbing work should be carried out by a suitably qualified and competent person, in accordance with all applicable local and national regulations. The water quality must conform to country requirements for drinking water. - The appliance is only suitable for connection to the cold water supply. - Miele F 1811 SF | Operating and Installation manual - Page 66
damage caused by leaking water. ^ Attach the connecting pipe to the shut-off valve, according to the instructions supplied by the manufacturer of the ice cube maker installation kit. ^ Install the connecting pipe. Always observe the indicated clearance dimensions to prevent damage to the connecting - Miele F 1811 SF | Operating and Installation manual - Page 67
Plumbing Connecting the water supply When connecting the water pipe to the solenoid valve of the appliance, follow the instructions supplied by the manufacturer of the ice cube maker installation kit. When bending the water pipe, be sure not to kink it, otherwise there is a risk of leaks and water - Miele F 1811 SF | Operating and Installation manual - Page 68
- Do not use an adapter. - Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. Improper connection of the equipment grounding conductor may a licensed electrician or call the Miele Technical Service. U1-800-999-1360 V1-800-565-6435 68 - Miele F 1811 SF | Operating and Installation manual - Page 69
access to your appliance to fix the problem. For information on set-up and installation of the RemoteVision module see the "Installation" section of this manual. Be sure your wireless system meets the following requirements - A wireless router that supports an IEEE 802.11b protocol - Windows XP - Miele F 1811 SF | Operating and Installation manual - Page 70
to the network when ; # appears in the display. If ; # does not appear, refer to the "Network options" section of the XKM 2000 Installation Instruction manual. ^ Press and hold the access button "p" for 2 seconds to confirm the change. ^ To return to the main menu, tap the X button until a solid - Miele F 1811 SF | Operating and Installation manual - Page 71
RemoteVision (optional accessory) MasterCool control panel options for RemoteVision Status indicators Description of function Flashing ; ~ Module booting phase Flashing ; ‡ Not connected to network Flashing ; | Connection to network established, no IP address assigned Solid ; # Connected to network - Miele F 1811 SF | Operating and Installation manual - Page 72
Alteration rights reserved / 4911 M.-Nr. 09 169 350 / 02 INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
 |
 |
Operating and Installation
Instructions
Freezer
with Ice Maker
F 1801 SF, F 1811 SF
F 1901 SF, F 1911 SF
To prevent accidents
and appliance damage
read these instructions
before
installation or use.
M.-Nr. 09 169 350
en - US, CA