Miele G 4228 SCU AM Operating instructions/Installation instructions
Miele G 4228 SCU AM Manual
View all Miele G 4228 SCU AM manuals
Add to My Manuals
Save this manual to your list of manuals |
Miele G 4228 SCU AM manual content summary:
- Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 1
Operating Instructions Dishwasher To prevent accidents and machine damage, read these instructions before installation or use. en-US HG05 M.-Nr. 10 544 640 - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 2
Contents IMPORTANT SAFETY INSTRUCTIONS 4 Guide to the dishwasher 13 Appliance overview 13 Control panel ...14 Caring for the environment 15 Energy-saving dishwashing 15 Before using for the first time 16 Opening the door 16 Closing the door...16 Child lock...16 Before using the appliance for - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 3
Water drainage fault 54 General problems 55 Noises...56 Poor cleaning results 57 Frequently asked questions 60 Cleaning the drain pump and non-return valve 60 Customer service 61 Repairs ...61 Warranty ...61 Optional accessories 62 Installation Instructions 65 Electrical connection 66 Water - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 4
risk of accidents and damage to the dishwasher, please read the installation plan and the operating instructions carefully before it is installed and used the installation plan and the operating instructions in a safe place and pass them on to any future owner. Miele cannot be held liable for damage - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 5
in domestic households and similar residential environments. This dishwasher is not suitable for outdoor use. It must only be used as specified in these operating instructions for cleaning domestic dishes and cutlery. Any other usage is not supported by the manufacturer and could be dangerous - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 6
IMPORTANT SAFETY INSTRUCTIONS Safety with children Children must be kept away from the times to avoid the risk of injury. There is the risk that children may lock themselves in the dishwasher. If the automatic door opening mechanism (depending on model) is active keep young children away from - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 7
IMPORTANT SAFETY INSTRUCTIONS Technical safety Installation, repair, and maintenance work should only be per- formed by a Miele-authorized service technician. Work by unqualified persons could be dangerous and may void the warranty. Before installation, check the dishwasher for visible signs of - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 8
IMPORTANT SAFETY INSTRUCTIONS To avoid the risk of damage to the dishwasher, make sure that the connection data on the data plate (fuse rating, voltage, and frequency) matches the electrical supply before connecting the dishwasher to the mains. Consult a qualified electrician if in any doubt. Do - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 9
IMPORTANT SAFETY INSTRUCTIONS A damaged appliance could be dangerous. If the dishwasher gets damaged, turn off the electrical supply and contact Miele. The manufacturer's warranty will be invalidated if the appliance is not repaired by a Miele-authorized service technician. Defective - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 10
- tive gloves to avoid injury on any sharp metal components. The dishwasher must be correctly aligned horizontally to ensure problem-free operation. In order to ensure stability, built-under and integrated dishwashers must only be installed under a continuous counter which is secured to adjacent - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 11
IMPORTANT SAFETY INSTRUCTIONS Proper use Do not use solvents in the dishwasher. Danger of explosion! Do not inhale or ingest powder detergent. Dishwasher detergents contain irritant or corrosive ingredients which can cause burning in the nose, mouth, and throat if swallowed, or inhibit breathing - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 12
may not be thoroughly dispersed. Please observe the information given in "Technical data" regarding the capacity of the dishwasher. Accessories Use only genuine original Miele parts. If spare parts or acces- sories from other manufacturers are used, the warranty may become invalid. Disposal of - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 13
Appliance overview Guide to the dishwasher a Upper spray arm (not visible) b Cutlery tray (depending on model) c Upper basket d Middle spray arm e Air intake for drying (depending on model) f Lower spray arm g - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 14
Guide to the dishwasher Control panel a Program selection b Time display c Check/Refill indicators d Start/Stop button with indicator light e Delay Start button with indicator light f Short button with indicator light g Program selection button h (On/Off) Button These operating instructions - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 15
using powder or liquid detergent, you can use 1/3 less detergent if baskets are only half full. - The dishwasher can be connected to a hot water supply for further economies. If the water is cold water. You can find additional tips on energysaving dishwashing in "Miele's guide to dishwashing". 15 - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 16
during operation if absolutely necessary and exercise extreme caution when doing so. Child lock The child lock can be used to prevent children opening the dishwasher. The door can then only be opened by using a lot of force. To lock the door, push the slide underneath the recessed handle to the - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 17
amount will be automatically dosed. Filling the rinse aid reservoir with detergent will damage the reservoir. Only pour rinse aid formulated for residential dishwashers into the reservoir. When using "Tab" detergents rinse aid is not needed. Adding rinse aid Press the button on the lid of the - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 18
Before using for the first time Rinse aid indicator When the Rinse aid indicator lights up, the rinse aid reservoir contains sufficient rinse aid for 2 - 3 programs only. Add rinse aid. If you consistently use a "Tab" detergent, you can deactivate the refill indicators if you wish (see "Options - - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 19
dishware and glassware: Decrease the rinse aid dosage. Turn the dishwasher off with the button, if it is turned on. Press the Start/Stop button and, simultaneously, switch the dishwasher on using the button. Keep the Start/Stop button pressed for at - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 20
too tall or hang through the baskets. If in doubt, test for free movement by manually rotating the spray arms. Some foods may contain natural dyes, e.g., carrots, tomatoes or tomato sauce. Plastic items in the dishwasher may discolor if large quantities of these foodstuffs find their way into the - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 21
with wooden parts - Craft items, antiques, valuable vases, and decorative glassware - Plastic items which are not heat-resistant: the high temperatures in the dishwasher may cause them to melt or lose shape. - Copper, brass, tin and aluminum items may discolor or become matt. - Colors painted over - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 22
Loading the dishwasher Loading examples Loading for 10 standard place settings with cutlery tray Upper basket Lower basket Cutlery tray (depending on model) 22 - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 23
Loading the dishwasher Loading for 16 standard place settings with cutlery tray Upper basket Lower basket Cutlery tray (depending on model) 23 - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 24
Loading the dishwasher Loading for 10 standard place settings with cutlery basket Upper basket Lower basket Cutlery basket 24 - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 25
Loading the dishwasher Loading for 13 standard place settings with cutlery basket Upper basket Lower basket Cutlery basket 25 - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 26
For safety reasons, do not oper- ate the dishwasher without the upper and lower baskets in place (except when items. Glasses can be arranged along the positioning rail of the cup rack to give them some support during the program. Lower the cup rack and lean the glasses against it, or double stack - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 27
smoothly in and out of the cabinet. Pull the upper basket out. Dishwashers with cutlery basket (see data plate for model number) Upper Plate in inches (cm) basket adjustment Upper basket ADA Full-size Lower basket Upper 7 7/8" 9 7/16" 12 3/16" (20) (24) (31) 13 3/4" (35*) Middle - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 28
Loading the dishwasher Lower basket MultiComfort area The rear section of the lower basket is used for washing cups, glasses, plates, pots and pans. Hinged spikes The spikes - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 29
Loading the dishwasher Cutlery Cutlery tray (depending on model) Arrange the cutlery in the tray as shown. To make unloading much easier, cutlery should be grouped in zones, - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 30
Loading the dishwasher Cutlery basket (depending on model) The cutlery basket can be placed anywhere on the front rows of spikes in the lower basket. To avoid the - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 31
that the cleaning and drying results of Tab detergents can vary greatly. For optimum cleaning and drying results, use Miele dishwasher detergent and add Miele salt and Miele rinse aid separately. See "Optional accessories." Detergent dosage Follow the dosage recommended by the manufacturer on the - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 32
Operation Adding detergent Press the opening catch on the detergent dispenser. The flap will spring open. The flap is always open at the end of a program. Add the required amount of detergent and close the flap. Make sure that the detergent packaging is properly closed after use to avoid it - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 33
on Make sure the spray arms are not obstructed. Close the door. Turn on the water supply if it is turned off. Turn the dishwasher on with the button. The Start/Stop indicator light flashes and the indicator light comes on next to the program selected. Selecting a program Choose your - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 34
Operation Starting a program The dishwasher can be started only if the door is closed. Press the Start/Stop button. The program will the electronic module calculates the program duration required depending on the temperature of the water taken into the dishwasher and the amount of dishes. 34 - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 35
fault. At the end of the program The program has finished when . appears in the display. The drying fan may continue to run for a few minutes at the end of the program. The dishwasher can now be opened and unloaded (see "Unloading the dishwasher"). To prevent the risk of steam damage to the - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 36
is not going to be used for a longer period of time, e.g., while on vacation, the water supply should be closed. Unloading the dishwasher Dishes tend to break and chip more easily when they are hot. Allow the dishes to cool until they are comfortable enough to handle before - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 37
. Close the door and press the Start/ Stop button. The program will continue from the point at which it was interrupted. Water in the dishwasher may be hot. Danger of scalding! Only open the door if absolutely necessary and exercise extreme caution when doing so. Before closing the door again - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 38
in which this option is available. In order to achieve optimum cleaning results, consumption rates are increased with this option. Turn the dishwasher on with the button. The Start/Stop indicator light flashes. Select a program. Press the Short button. The Short indicator light comes on - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 39
turned on. - : Refill indicator is turned off. Press the Start/Stop button to change the setting. The setting is now stored in memory. Turn the dishwasher off with the button. If you switch to using detergent that does not contain salt or rinse aid, it is important to remember to add - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 40
that it is not fully dispensed. Do not use liquid detergent when selecting Delay Start, as it can run into the dishwasher before it is required. Turn the dishwasher on with the button. The Start/Stop indicator light flashes. Select the desired program. Press the Delay Start button. The last - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 41
Options If Optimize Standby is switched on (see "Options - Optimize Standby"), the display will go out after a few minutes, leaving just the Start/Stop indicator light flashing slowly. Press any button to switch the display back on again for a few minutes. The time up until the program starts will - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 42
last time a button has been pressed or after the end of a program. The dishwasher will not turn off while a program is running, during the delay start period, on. Press the Start/Stop button and, simultaneously, switch the dishwasher on using the button. Keep the Start/Stop button pressed for at - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 43
on. Press the Start/Stop button and, simultaneously, switch the dishwasher on using the button. Keep the Start/Stop button pressed for at - : At least one setting has been changed To reset the dishwasher to the factory default settings, press the Start/Stop button. The setting is now stored in - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 44
74 with dried on residue; use 20% more detergent than recommended. X 154/ X 68 Normal 1) Program for regular use to com- As 113- pletely wash a full load of normally needed 140/ X 154/ X 68 soiled dishware with the ability to 45-60 adjust energy and water consump- tion based on the soil - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 45
Consumption 2) Energy Water Program overview Duration 2) Cold water 50°F/10°C kWh 1.80 Hot water 120°F/49°C kWh 2.10 Gallons/Litres 6.2/23.5 Cold water 50°F/10°C h:min 3:22 Hot water 120°F/49°C h:min 2:47 1.06 1.15 3.5/13.2 2:29 2:00 1.05 1.15 3.6/13.5 3:08 2:46 1.75 1.95 4.9/18 - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 46
and care Check and clean your dishwasher regularly. This will help avoid problems and faults. All surfaces are in the cabinet, these can be removed with a special dishwasher cleaner (see "Optional accessories"). Follow the instructions on the packaging. If you mainly use low temperature programs - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 47
happen that the surfaces can become discolored or changed. Remove any soiling immediately. Clean the front with a solution of warm water and a little dishwashing liquid applied with a soft sponge. Wipe the surfaces dry using a soft cloth. Glass cleaners may be used to clean the exterior. However - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 48
food from being redeposited on dishes. It also protects the circulation pump from damage caused by foreign objects. Filter system Turn the dishwasher off. This dishwasher must not be used without all the filters in place! Collection of coarse soil may cause the filters to clog. The level of - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 49
Cleaning and care To clean the inside of the filter, the flap must be opened: Press catches together in the direction of the arrows as shown, and open the filter . Rinse all the filters under running water. Then close the flap so that the catch engages. Replace the filter system so that - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 50
. The spray arms should therefore be inspected and cleaned regularly (approx. every 4 - 6 months). Turn the dishwasher off. Remove the spray arms as follows: Take out the cutlery tray (if your dishwasher is fitted with one). Push the top spray arm upwards to engage the inner ratchet. Then - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 51
from incorrect operation, can be put right without contacting Miele Service. This will save time and money. The following guide may help you to find the reason for a cannot be held liable for unauthorized work. Technical problems Problem After the dishwasher is turned on with the button, the - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 52
at the Turn the dishwasher back on after a few seconds. same time. Fault number appears in the display. Select the desired program. Press the Start/Stop button. If the indicator lights flash again, there is a technical fault. Contact Miele Service. Fault : The drain pump - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 53
and off. Turn on the water supply fully. The dishwasher stops Before fixing the fault: during a program. Turn the dishwasher off with the button. The Intake/Drain indicator flashes. Fault code or appears in the display. There is a problem with the water intake. Turn on the water - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 54
stops Before fixing the fault: during a program. Turn the dishwasher off with the button. The Intake/Drain indicator flashes. Fault code shows in the display. There is a problem with the water intake. There might be water in the wash cabinet. Clean the filter system (see "Cleaning - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 55
problems Problem Possible cause and solution The indicator lights and The dishwasher has switched off automatically to time display are dark. save energy. Turn the dishwasher and/or the interior walls are wet after a program has finished. This is caused by the drying system and does not - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 56
Frequently Asked Questions Noises Problem There is a knocking noise in the wash cabinet. There is a rattling noise in the wash cabinet. by the installation or the diameter of the water pipe. This has no influence on dishwasher function. If in doubt, contact a suitably qualified plumber. 56 - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 57
Frequently Asked Questions Poor cleaning results Problem Possible cause and solution The dishes are not clean. The dishes were not loaded correctly. See notes in "Loading the dishwasher". The program was not powerful enough. Select a more intensive program (see "Program overview"). Not - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 58
Frequently Asked Questions Problem Possible cause and solution Dishes is not dry or cut- cannot be wiped off. The glassware is not dishwasher-safe. The surfaces are affected. There is no remedy. Purchase glassware which is dishwasher-safe. Tea or lipstick stains have not been completely - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 59
Frequently Asked Questions Problem Possible cause and solution There are rust stains on The affected items are not corrosion resistant. the cutlery. There is no remedy. Purchase cutlery which is dishwasher-safe. 59 - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 60
a program, the drain pump or the non-return valve might be blocked. They are, however, easy to clean. Disconnect the dishwasher from the electrical supply. Turn off the dishwasher and withdraw the plug. Take the filter system out of the wash cabinet (see "Cleaning and care, Cleaning the filters - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 61
Customer service Repairs For problems that you cannot resolve on your own, please contact: - your Miele dealer or - Miele Service The telephone number for Miele is listed at the back of these instructions. In the event of a fault which you cannot correct yourself please contact the Miele Service - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 62
as optional accessories. All the products are designed for use with Miele dishwashers. These and many other useful products can be ordered from a Miele dealer or via the Miele Website (see end of this booklet for contact details). Dishwasher detergent, rinse aid, and salt When you decide to buy - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 63
care products Miele cleaning and care products provide optimum care for your dishwasher. Dishwasher cleaner - Cleans the dishwasher effectively and thoroughly - Removes grease, bacteria, and unpleasant odors - Ensures excellent dishwashing results Dishwasher descaler - Removes heavy lime scale - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 64
64 - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 65
Please refer to the Installation Diagram supplied with these instructions. To comply with IEC sound testing protocols, please contact Miele for additional instructions. Information is subject to change. Please refer to our website to obtain the most current product specification, technical - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 66
Do not use an extension cord to connect the dishwasher to the mains. Danger of overheating! See data plate on the right side of the door. A damaged power cord must only be replaced with a genuine Miele cord by a Miele service technician. Grounding instructions THIS APPLIANCE MUST BE GROUNDED. In the - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 67
. CAUTION: Before servicing, dis- connect the power supply by either removing the fuse, shutting off the power main or manually "tripping" the circuit the terminal block and the strain relief are tightened. GROUNDING INSTRUCTIONS THIS APPLIANCE MUST BE GROUNDED. This appliance must be connected - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 68
a fully vented plumbing system. The intake hose must not be shortened or damaged in any way as it contains electrical components. Do not sit the dishwasher on the hose. The hose needs to be free of kinks and able to move freely after installation. Do not place hose or power cord - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 69
water in the sink from siphoning back into the dishwasher. - The dishwasher is supplied with approx. 5' 11" (1.5 m) not squashed or stretched. After servicing the appliance, ensure that the drain does not drain connection is situated lower than the guide path for the bottom basket rollers in - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 70
testing Prerequisites for sound emission tests Load the dishwasher with 16 standard place settings and use the Normal program. Setup for sound emission tests The dishwasher must be set up according to the following specifications. Install the dishwasher into an analyzing unit. Secure the front - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 71
Sound emission testing Push the provided fleece strips (depending on model) under the toe-kick until it is flush with the appliance feet . Push the toe-kick into place in such a way that it is flush with the door front . 71 - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 72
Sound emission testing Remove the protective film from the provided insulating strip (depending on model) . Push the insulating strip into the front top edge of the toe-kick . 72 - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 73
- Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 74
- Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 75
419-4298 www.mieleusa.com Technical Service & Support Phone: 800-999-1360 Fax: 888-586-8056 [email protected] International Headquarters Miele & Cie. KG Carl-Miele-Straße 29 33332 Gütersloh Germany Canada Importer Miele Limited Headquarters and Miele Centre 161 Four Valley Drive Vaughan - Miele G 4228 SCU AM | Operating instructions/Installation instructions - Page 76
G 4223 / G 4228 en-US M.-Nr. 10 544 640 / 02
Operating Instructions
Dishwasher
To prevent accidents and machine damage, read these instructions be-
fore installation or use.
en-US
M.-Nr. 10 544 640
HG05