Motorola HS830 User Manual
Motorola HS830 - Wireless Pendant Headset Manual
 |
UPC - 646444467001
View all Motorola HS830 manuals
Add to My Manuals
Save this manual to your list of manuals |
Motorola HS830 manual content summary:
- Motorola HS830 | User Manual - Page 1
4 Scroll to On. 5 Press Select to turn on the Bluetooth feature. The Bluetooth feature remains on until you turn the feature off. Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide. 3 PAIR Your Module Before you can use your wireless module, you must - Motorola HS830 | User Manual - Page 2
handsfree accessory for your helmet. Two wireless modules can also be configured for full-duplex voice communication with each other. For example, a motorcycle driver may communicate wirelessly with a rider sitting behind. For details on these applications, see the HS830 Helmet Adapter User's Guide.
-
1 -
2
 |
 |
Before using this product, read the Important Safety and Legal
Information pamphlet and follow its instructions.
Take a moment before you get started to
familiarize yourself with your new
HS830 Wireless Module.
BEFORE YOU
BEGIN
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. The Bluetooth trademarks are
owned by their proprietor and used by Motorola, Inc. under
license. All other product or service names are the property of
their respective owners.
The use of wireless devices and their accessories may be
prohibited or restricted in certain areas. Always obey the laws
and regulations on the use of these products.
© Motorola, Inc. 2005.
Motorola, Inc.
Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, IL 60196
USA
www.hellomoto.com
1-877-MOTOBLU
1-800-331-6456 (United States)
1-888-390-6456 (TTY/TDD United States for
hearing impaired)
1-800-461-4575 (Canada)
Part Number: 6809495A49-O
HS830
Bluetooth®
Wireless Module
TROUBLESHOOTING
My phone doesn't find my wireless module.
Make sure the indicator light on your wireless
module is on and steady when your phone is
searching for devices (see step 3).
My wireless module worked before but now
it's not working.
Make sure your phone is on and the Bluetooth
feature is turned on in your phone (see step 2).
If the Bluetooth feature was turned off or was
turned on only temporarily, you may need to
restart the Bluetooth feature (see step 2) and
pair your phone and wireless module again (see
step 3).
Support
.
If you need more help, contact us at
1- 877-MOTOBLU.
FOR DETAILS ABOUT YOUR HANDSFREE
DEVICE
See the user’s guide or visit us at
www.hellomoto.com/bluetooth and click
Support
.
Get Connected in
5 Quick Steps
1 - CHARGE
2 - START
BLUETOOTH
FEATURE
3 - PAIR
4 - CONNECT
TO NECK
STRAP
5 - TEST AND
USE
1
CHARGE
Plug the Motorola charger into the end of
the module with the release tab facing
down.
The indicator light turns on when the battery
is charging. It may take up to 1 minute for
the indicator light to turn on. When the
module's battery is fully charged (about 2
hours), the indicator light turns off.
Disconnect the charger.
1
Note: Module is not functional while charging.
Your Module's Battery
2
2
START BLUETOOTH
FEATURE
Your Phone
Press
(
Menu
)
> Settings > Connection >
Bluetooth Link > Setup.
Scroll to
Power.
Select
Change.
Scroll to
On.
Press
Select
to turn on the Bluetooth
feature. The Bluetooth feature remains on
until you turn the feature off.
Note: These steps are for most Motorola phones. For other
phones, see your phone's user's guide.
Your phone's Bluetooth feature is off by default.
To use your wireless module, you must turn on
the Bluetooth feature in your phone.
For most Motorola phones:
M(
1
2
3
4
5
PAIR
Your Module
3
Before you can use your wireless module, you
must pair (link) it with your phone.
Step A - PUT THE MODULE IN PAIRING
MODE
Ensure the wireless module is turned off
(indicator light not blinking).
Press and hold the Call
E
button for 6
seconds. The indicator light will initially flash,
but continue to hold down the button until
the indicator light is steadily lit.
If the indicator light is flashing or not steadily
lit when releasing the button, repeat
both
steps 1 and 2
on this page.
1
2
3
PAIR
CONTINUED
Your Phone
Step B - SET YOUR PHONE TO LOOK FOR
YOUR MODULE
3
4
5
1
2
For most Motorola phones:
On your Motorola phone, press
(
Menu
)
>
Settings > Connection > Bluetooth Link >
Handsfree >
Look for Devices.
The phone lists Bluetooth devices it finds.
Select
Motorola HS830
.
Select
OK
or
Yes
to pair your module with
your phone.
Enter the passkey:
0000
Select
OK
.
When your wireless module successfully
pairs with your phone, the indicator light
changes from steadily lit to flashing.
Note: These steps are for most Motorola phones. For other
phones, see your phone's user's guide.
M(
4
CONNECT
Your Module to Neck Strap
Insert the 2.5mm plug from the
neck strap into the module jack on the
bottom of the wireless module.
Push the wireless module back
into the neck strap holder.
Insert the two tabs on the neck
strap holder into the slots on the
top of the wireless module.
Place the neck strap around your
neck and insert the earbud in your
ear.
1
2
3
4
5
TEST AND USE
Your phone and wireless module are now
paired and ready to make and receive calls.
To make a call:
Place the neck strap on and the earbud in
your ear.
On your phone, dial the number you want
to call and press the
SEND
key.
If your phone and module are successfully
paired, you will hear ringing on the earbud.
After you have successfully paired your
phone and module, you don't need to
repeat these steps. For daily use, ensure
that your module is turned ON and that
your phone's Bluetooth feature is ON.
To save battery power, turn OFF the
module when you don't use it for an
extended time.
1
2
3
Release Tab Down
Call Button
Volume
Up
Button
Charging Port
Volume
Down
Button
Indicator
Light
Module
Jack
Indicator
Light
Plug
Module
Jack
Neck
Strap
Holder
Slots