Motorola PHOTON Q 4G LTE PHOTON Q - User Guide - Page 106
View Memory in the microSD Card, Erase the microSD Card, Connect Your Phone to Your Computer, Settings - drivers
View all Motorola PHOTON Q 4G LTE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Note: DO NOT remove a microSD card while files are being accessed or transferred. Doing so will result in loss or damage of data. Note: Make sure your battery is fully charged before using the microSD card. Your data may become damaged or unusable if the battery runs out while using the microSD card. View Memory in the microSD Card ► With the microSD card inserted, touch Apps > and available memory space will be displayed.) Settings > Storage. (The used Erase the microSD Card Note: Do not remove your memory card while your phone is using it or writing files on it. ► To format your memory card, touch Apps > card. Settings > Storage > Erase SD Note: All the data on the microSD card will be erased, after which the files CANNOT be retrieved. To prevent the loss of important data, please check the contents before you format the card. Connect Your Phone to Your Computer You can connect your phone to a computer with a USB cable. Note: The first time you use a USB connection, your computer may indicate that drivers are being installed. Follow any prompts you see to complete the installation. This may take a few minutes. 1. Connect a Motorola micro USB data cable from your phone's micro USB port to a USB port on your computer. Your phone should show in the status bar. Note: Make sure to connect the phone to a high power USB port. Typically, these are located directly on your computer. 2. On your phone, flick down the status bar and touch the USB notification to see the USB connection options. Note: If the USB connection options do not appear, you can change the settings by touching Apps > Settings > Storage > Menu > USB computer connection > Media device (MTP). 3. Touch an option: Mass Storage: Drag and drop files between your computer and memory card folders. When you're done, use "Safely Remove Hardware" before disconnecting the USB cable. Tools and Calendar 96