Motorola SB5101 User Manual
Motorola SB5101 - SURFboard - 30 Mbps Cable Modem Manual
 |
UPC - 612572148273
View all Motorola SB5101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Motorola SB5101 manual content summary:
- Motorola SB5101 | User Manual - Page 1
all LED's blink off, except "Standby". G Modem powered off. H Modem is successfully registered but Network Access Control is disabled via DOCSIS® Configuration File. I Modem has successfully registered and is processing a firmware upgrade. SURFboard® SB5101 Cable Modem LED Status PC/ Notes Power - Motorola SB5101 | User Manual - Page 2
IP address? Yes Using TFTP server & filename from DHCP, download the TFTP configuration file Yes CM receive config file? Yes BLP Enabled? No Key Authorization Yes Complete registration with Yes CMTS Yes Initialization No Complete (Note E) Motorola, the stylized M Logo and SURFboard
-
1 -
2
 |
 |
Notes
Power
Receive
Send
Online
PC/
Activity
Standby
A
Power On
B
Downstream Scan
C
Upstream Range
D
Network Connect
E
PC/Network Activity
F
Standby
*
G
Power Off
H
Network Access Off
I
Firmware Upgrade in
Progress
Modem Power-on Self Test (POST). If LED remains blinking, faulty modem.
Modem scanning downstream frequencies.
Modem scanning upstream frequencies.
Downstream and Upstream acquired. Modem processing for DHCP,
TFTP, and TOD.
Modem operational. PC/Activity is solid when a CPE is connected
and blinks when transmitting or receiving data.
“Standby” switch enabled. Modem successfully completed boot
sequence and all LED’s blink off, except “Standby”.
Modem powered off.
Modem is successfully registered but Network Access Control is
disabled via DOCSIS
®
Configuration File.
Modem has successfully registered and is processing a firmware upgrade.
SURFboard
®
SB5101 Cable Modem LED Status
SURFboard
®
SB5101 Cable Modem
A
B
C
D
E
F
*
G
H
I
- On
- Off
- Flashing
* Standby not available on all models