NEC 60XM5 User Manual
NEC 60XM5 - PlasmaSync - 60" Plasma Panel Manual
 |
UPC - 050927253072
View all NEC 60XM5 manuals
Add to My Manuals
Save this manual to your list of manuals |
NEC 60XM5 manual content summary:
- NEC 60XM5 | User Manual - Page 1
PlasmaSync Plasma Monitor (Enhanced split screen Model) PlasmaSync 42XM5 PX-42XM5G PlasmaSync 50XM6 PX-50XM6G PlasmaSync 60XM5 PX-60XM5G User's Manual Benutzerhandbuch Manuel d'utilisation Manual del Usuario Manuale dell'utente Bruksanvisning Kullanım Kılavuzu - NEC 60XM5 | User Manual - Page 2
User's Manual (Enhanced split screen Model) ENGLISH - NEC 60XM5 | User Manual - Page 3
PERSONNEL. Warnings and Safety Precaution This plasma monitor is designed and manufactured to provide long, trouble-free service. No maintenance other than cleaning is required. Please see the section "Plasma monitor cleaning procedure". The plasma display panel consists of fine picture elements - NEC 60XM5 | User Manual - Page 4
this monitor monitor will not conform to mandatory CE or C-Tick standards. Remote cable (not supplied) To plasma monitor electronic products carrying the mark (left) must be disposed of separately from normal household waste. This includes plasma monitors and their electrical accessories electronic - NEC 60XM5 | User Manual - Page 5
of the room En-21 Troubleshooting En-40 Table of Signals Supported En-41 Specifications En-45 Reducing noise in the picture En-21 Setting the color temperature En-21 Contents of the Package Adjusting the color to the desired level En-22 Ⅺ Plasma monitor (ן1) Changing the Gamma Curve - NEC 60XM5 | User Manual - Page 6
device following the installation manual of the optional accessory. • Install the device in a stable and level environment that is strong enough to support the weight. • Use the specified clasps for installing. • After installation, take appropriate measures to prevent the plasma from tipping over - NEC 60XM5 | User Manual - Page 7
(MONO) EXTERNAL CONTROL REMOTE IN OUT BNC plasma display, set the LOOP OUT to ON. • To create a video wall, set the VIDEO WALL menu items properly. • To connect monitors plasma display; Bundle the signal and audio cables at the back of the unit to connect to the display. 42XM5 50XM6 60XM5 - NEC 60XM5 | User Manual - Page 8
Using the wired remote control mode Connect the remote cable* to the remote control's remote jack and the "REMOTE IN" terminal on the monitor. When the cable is connected, the mode automatically switches to wired remote control. When the wired remote control mode is used, the remote control can be - NEC 60XM5 | User Manual - Page 9
4 1 32 q Power Turns the monitor's power on and off. w Remote sensor window Receives the signals from the remote control. e POWER/STANDBY indicator When the completely disconnect power from the display. Note: This plasma monitor has the capasity to display images when connected to European DVD - NEC 60XM5 | User Manual - Page 10
system (by RS232C). J REMOTE IN Connect the remote cable to the remote control's remote jack to obtain wired remote control. K REMOTE OUT Connect the remote cable to the REMOTE IN jack of the other display monitor to obtain wired remote control. L Handles Use when installing or carrying the plasma - NEC 60XM5 | User Manual - Page 11
system (by RS232C). J REMOTE IN Connect the remote cable to the remote control's remote jack to obtain wired remote control. K REMOTE OUT Connect the remote cable to the REMOTE IN jack of the other display monitor to obtain wired remote control. L Handles Use when installing or carrying the plasma - NEC 60XM5 | User Manual - Page 12
system (by RS232C). J REMOTE IN Connect the remote cable to the remote control's remote jack to obtain wired remote control. K REMOTE OUT Connect the remote cable to the REMOTE IN jack of the other display monitor to obtain wired remote control. L Handles Use when installing or carrying the plasma - NEC 60XM5 | User Manual - Page 13
Remote Control q POWER ON/STANDBY Switches the power on/standby. (This does not operate when the POWER/STANDBY indicator of the plasma is off.) w RGB/PC Press this button to select RGB/PC as the source. RGB/PC can also be selected using the INPUT SELECT button on the monitor !3 DISPLAY Displays the - NEC 60XM5 | User Manual - Page 14
remote control to mute the audio; press again to restore. DISPLAY To check the settings: 1. Press the DISPLAY button to display the display timer starts when the menu turns off. → 30 → 60 → 90 → 120 → 0 OFF TIMER 30 To monitor. When you are leaving the room or do not plan to use the system for a - NEC 60XM5 | User Manual - Page 15
Press the WIDE button on the remote control. 2. Within 3 seconds ... Press the WIDE button again. The screen size switches as follows: → NORMAL → FULL → STADIUM → ZOOM → 2.35:1 → 14:9 → UNDERSCAN When a 720P or 1080I signal is input: FULL ↔ 2.35:1 When displaying enhanced split screen: NORMAL ↔ FULL - NEC 60XM5 | User Manual - Page 16
the display output of the various VESA signal standards supported by the monitor. Ⅵ "PICTURE SIZE" setting When the setting of "PICTURE SIZE" is OFF, the size of RGB-input pictures will be TRUE in place of NORMAL. Ⅵ When 852 (848) dot ן480 line wide VGA* signals with a vertical frequency of 60 Hz - NEC 60XM5 | User Manual - Page 17
Showing a couple of pictures on the screen at the same time * There may be some RGB-input signals that may not be displayed as not all signals are supported. 1. Press the button to select a screen mode from among single mode, side-by-side, and picture-in-picture. SINGLE button VIDEO1 A SINGLE - NEC 60XM5 | User Manual - Page 18
displayed 1. Press the SELECT/FREEZE button to make the desired picture active. 2. Press the RGB/PC, VIDEO, or DVD/HD button. Each press of the button changes the selection of the input signal. The INPUT SELECT button on the monitor can also be used to change the selection. Zooming in on a specific - NEC 60XM5 | User Manual - Page 19
MENU/ENTER button on the remote control to display the MAIN MENU. MAIN MENU manual. ADVANCED OSM : OFF NEXT PAGE SEL. MENU/ENTER OK EXIT EXIT MAIN MENU PREVIOUS PAGE LANGUAGE COLOR SYSTEM SOURCE INFORMATION 2 / 2 SEL. MENU/ENTER OK EXIT EXIT 2. Press the cursor buttons L M on the remote control - NEC 60XM5 | User Manual - Page 20
Main menu OPTION1 Sub menu OSM BNC INPUT D-SUB INPUT RGB SELECT HD SELECT INPUT SKIP ALL RESET Sub menu 2 Sub menu 3 Sub menu 4 DISPLAY OSM OSM ADJ. OFF←→ON 1←...→6 OSM ANGLE H←→V OSM ORBITER OFF←→ON OSM CONTRAST LOW←→NORMAL RGB←→COMP.←→SCART1←→SCART2 RGB←→SCART3 AUTO 1080B/1035I/1080A - NEC 60XM5 | User Manual - Page 21
LOCK 3 ORBITER AUTO 1 AUTO 2 MANUAL H-DOT/V-LINE/TIME OFF INVERSE OFF PWR. ON MODE CONTROL LOCK IR REMOTE LOOP OUT REMOTE ID ID NUMBER VIDEO YES SUB. P RATE 20%←...→100% YES DISPLAY FADE←→NORMAL YES OFF←→S BY S←→BTM LFT У COLOR SYSTEM AUTO/3.58 NTSC/4.43 NTSC/PAL/PAL 60/PAL-N/PAL-M/ - NEC 60XM5 | User Manual - Page 22
OFF: Turns the noise reduction function off. Setting the color temperature Use this procedure to set color tone produced by the plasma display. Example: Setting "HIGH" On "COLOR TEMP." of "PICTURE" menu, select "HIGH". PICTURE PREVIOUS PAGE COLOR TEMP. : HIGH GAMMA : 2 LOW TONE : MODE1 - NEC 60XM5 | User Manual - Page 23
Adjusting the color to the desired level Use this procedure to adjust the white balance for each color temperature to achieve the desired color quality. Example: Adjusting the "GAIN RED" of "HIGH" color temperature Set "ADVANCED OSM" to "ON" in the MAIN MENU. On "COLOR TEMP." of "PICTURE" menu, - NEC 60XM5 | User Manual - Page 24
off, the Fine Picture and the Picture ADJ. items are displayed so that you can adjust them. Ⅵ Adjusting the Auto Picture made manually. * If FINE PICTURE can't be adjusted, set Auto Picture to OFF and adjust manually. Ⅵ the remote control. * The settings on the IMAGE ADJUST menu are not preset at - NEC 60XM5 | User Manual - Page 25
OSM settings ON: The informations on screen size, volume control, etc. will be shown. OFF: The informations on screen size, volume control, etc. will not be shown. The DISPLAY button on the remote control will not function either. Ⅵ OSM ADJUST settings Adjusts the position of the menu when it - NEC 60XM5 | User Manual - Page 26
the suitable mode for the specifications of input signals as listed in the table "Computer input signals supported by this system" on page En-41. be skipped over and only pictures whose signals are being transmitted will be displayed. This setting is valid only for the INPUT SELECT button on the - NEC 60XM5 | User Manual - Page 27
monitor with a computer. * If the computer's power is not turned on or if the computer and selector tuner are not properly connected, the system is set to the off state. * For instructions PAL, PAL60, 480I (60 Hz), 525I (60 Hz), 576I (50 Hz), 625I (50 Hz), 1035I (60 Hz), 1080I (60 Hz) only] Example: - NEC 60XM5 | User Manual - Page 28
Use this to set the inverse mode or to display a white screen. Example: Setting "INVERSE" to MANUAL: User can adjust the orbiter function (Horizontal Dot, Vertical Line and Time) manually 3 minutes. * Ending a WORKING TIME function, the monitor will go to STANDBY. [Example] WORKING TIME: 01H30M - NEC 60XM5 | User Manual - Page 29
minutes. Ⅵ To select "ON" for the "WORKING TIME"... Set the hours of the working time to 0H and the minutes to 0M. "ON" will be displayed. SOFT FOCUS Reduces edges and softens the image. Example: Setting "SOFT FOCUS" to "2" On "SOFT FOCUS" of "LONG LIFE" menu, select "2". LONG LIFE PLE : AUTO - NEC 60XM5 | User Manual - Page 30
or "OFF". * This function is available only for 50 and 60 inch types. Example: Setting the "PICTURE SIZE" mode to " the input mode you want, or repeat timer which displays two input modes alternately. On "OPTION3" menu, select NEC protocol is used (normal). * Consult your dealer for details of protocol. - NEC 60XM5 | User Manual - Page 31
it does not function under the timer's setting. on at 8:30 A.M., Monday, displaying RGB2 source, and switched off at 10:30 A.M. On "TIMER" menu, off in the 24-hour format. INPUT: Set the input mode that will be displayed when the power is turned on from "VIDEO1~3", "DVD1~2", "RGB1~3" and "MULTI - NEC 60XM5 | User Manual - Page 32
case of Video Wall, timer No.1 can be used to control all the displays simultaneously. INPUT VOLUME PWR. ON MODE : VIDEO2 : LAST CONTROL LOCK : ON IR REMOTE : ON LOOP OUT : OFF REMOTE ID : ALL ID NUMBER : ALL VIDEO WALL NEXT PAGE SEL. ADJ. EXIT RETURN 3 / 4 Information Ⅵ CONTROL - NEC 60XM5 | User Manual - Page 33
The RGB1 input will be displayed regardless of the setting of LOOP OUT. REMOTE ID setting Set the remote code to adapt the plasma monitor to the remote control. Example: Setting to "1" Information Ⅵ REMOTE ID setting ALL: The remote code is not set. 1 to 4: The specified remote code is applied. ID - NEC 60XM5 | User Manual - Page 34
screen portions and creates multiple screens. AUTO ID This feature automatically sets the ID numbers of multiple displays connected to each other. Example: Setting "ON" Set the ID number for the No. 1 display on ID NUMBER menu. On "AUTO ID" of "VIDEO WALL" menu, select "ON", then press the MENU - NEC 60XM5 | User Manual - Page 35
.4 No.3 Display 2 REMOTE OUT REMOTE OUT No.1 No.2 No.4 No.3 Display 4 REMOTE OUT REMOTE IN No.1 No.2 No.4 No.3 REMOTE IN Display 3 OFF: Disables Auto ID function. Note: To use this function, you have to connect the displays with the remote cable (not supplied). control the No.1 monitor will - NEC 60XM5 | User Manual - Page 36
screen when there is no sub screen input signal. This feature is available only when the picuture-in-picuture mode is selected. Example: Setting "DISPLAY" to "FADE" On "SUB. PICTURE" of "OPTION4" menu, press the MENU/ENTER button. The "SUB. PICTURE" screen appears. Adjust the items. S BY S: Will - NEC 60XM5 | User Manual - Page 37
. Adjust the items. TEXT INSERT INPUT : RGB1 SUB. P DETECT : AUTO PIC. RATE : 100% D I S P L AY : NORMAL SEL. ADJ. EXIT RETURN Enhanced split screen Model Information Ⅵ TEXT INSERT setting OFF: Displays no text. BOTTOM-1/BOTTOM-2/BOTTOM-3/MID.LOW/ MID.HIGH/TOP-3/TOP-2/TOP-1/LEFT/RIGHT - NEC 60XM5 | User Manual - Page 38
of the main menu items are available for advanced users. OFF: Some of the main menu items are color system used in your current country. AUTO: The color systems are "SOURCE INFORMATION" is displayed. SOURCE INFORMATION H. FREQUENCY : 48.4KHZ V. FREQUENCY : 60.0HZ H. POLARITY V. POLARITY - NEC 60XM5 | User Manual - Page 39
Control Pin Assignments Application These specifications cover the communications control of the plasma monitor by external equipment. Connections Connections are made as described below. External equipment e.g., Personal computer Display Connector on the plasma monitor side: EXTERNAL CONTROL - NEC 60XM5 | User Manual - Page 40
connector (En-39). • The transmit frequency of the remote control of STB is 37.9 kHz (Typical). Connection Example: Connecting an STB PLASMA DISPLAY Video cable IN OUT OUT IN Remote cable* STB STB Remote Control Carrier fHz: 37.9 kHz (Typical) * The 1/8 Stereo Mini cable must be purchased - NEC 60XM5 | User Manual - Page 41
Troubleshooting If the picture quality is poor or there is some other problem, check the adjustments, operations, etc., before requesting service. Symptom The unit emits a crackling sound. Picture is disturbed. Sound is noisy. Remote control operates erroneously. The remote control does not work. - NEC 60XM5 | User Manual - Page 42
input signals supported by this system Model Dots ןlines Vertical frequency Horizontal frequency Signal Type (Hz) (kHz) NEC PC- PC/AT 1024ן768 60.0 48.4 compatible 70.1 56.5 computers 75.0 60.0 85.0 68.7 100.6 80.5 119.4 95.5 1152ן864 75.0 67.5 60.0 53.7 72.0 64 - NEC 60XM5 | User Manual - Page 43
for the input signals is set automatically. If the picture is not displayed properly, set the RGB mode prepared for the input signals listed in the table above. *5 To connect the monitor to Macintosh computer, use the monitor adapter (D-Sub 15-pin) to your computer's video port. *6 Other screen - NEC 60XM5 | User Manual - Page 44
, each signal is converted to a 1365 dotsן768 lines signal. (Except for *2) Computer input signals supported by this system Model Vertical Horizontal Dots ןlines frequency frequency Signal Type (Hz) (kHz) NEC PC-9800 640ן400 70.1 31.5 720ן400 70.1 31.5 640ן480 59.9 31.5 72 - NEC 60XM5 | User Manual - Page 45
for the input signals is set automatically. If the picture is not displayed properly, set the RGB mode prepared for the input signals listed in the table above. *5 To connect the monitor to Macintosh computer, use the monitor adapter (D-Sub 15-pin) to your computer's video port. *6 Other screen - NEC 60XM5 | User Manual - Page 46
Accessories Power cord (ן1), Remote control (ן1), AAA batteries (ן2), Manuals (Start up Guide and CD-ROM), Ferrite cores for power cord (ן2), bands for power code /60 Hz • 19201080P @ 50 Hz Note: In some cases a signal on the plasma monitor may not be displayed properly. The problem - NEC 60XM5 | User Manual - Page 47
Accessories Power cord (ן1), Remote control (ן1), AAA batteries (ן2), Manuals (Start up Guide and CD-ROM), Ferrite cores for power cord (ן2), bands for power code /60 Hz • 19201080P @ 50 Hz Note: In some cases a signal on the plasma monitor may not be displayed properly. The problem - NEC 60XM5 | User Manual - Page 48
Accessories Power cord (ן1), Remote control (ן1), AAA batteries (ן2), Manuals (Start up Guide and CD-ROM), Ferrite cores for power cord (ן2), bands for power code /60 Hz • 19201080P @ 50 Hz Note: In some cases a signal on the plasma monitor may not be displayed properly. The problem
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
 |
 |
PlasmaSync Plasma Monitor
(Enhanced split screen Model)
PlasmaSync 42XM5
PX-42XM5G
PlasmaSync 50XM6
PX-50XM6G
PlasmaSync 60XM5
PX-60XM5G
User’s Manual
Benutzerhandbuch
Manuel d’utilisation
Manual del Usuario
Manuale dell’utente
±уководство пользователя
Bruksanvisning
Kullanım Kılavuzu
Εγ±ειρίδι² ³ρήσης