NEC ASLCD52V AccuSync 2 Series User's Manual - Page 15
Monitor, AccuSync LCD72V, Notes, Specifications - 17
UPC - 805736011401
View all NEC ASLCD52V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Specifications -continued Monitor Specifications LCD Module Diagonal: Viewable Image Size: Native Resolution (Pixel Count): Input Signal Video: Sync: Display Colors Maximum Viewing Angles Synchronization Range Resolutions Supported Analog input: Left/right: Up/Down: Horizontal: Vertical: Active Display Area Power Supply Current Rating Dimensions Horizontal : Vertical : Weight Environmental Considerations Operating Temperature: Humidity: Feet: Storage Temperature: Humidity: Feet: AccuSync LCD72V Monitor Notes 17.0 inch 17.0 inch 1280 x 1024 Active matrix; thin film transistor (TFT) liquid crystal display (LCD); 0.264 mm dot pitch; 250cd/m2 white luminence; 450:1 contrast ratio, typical ANALOG 0.7 Vp-p/75 Ohms Separate sync TTL Level (Positive/Negative) Horizontal sync Positive/Negative Vertical sync Positive/Negative 16,194,277 Depending on display card used. 70°/70° (CR>10) 65°/60° (CR>10) 31.5 kHz to 81.1 kHz 55 Hz to 76 Hz Automatically Automatically 720 x 400*1 : VGA text Some systems may not support 640 x 480*1 at 60 Hz to 75 Hz all modes listed. 800 x 600*1 at 56 Hz to 75 Hz 832 x 624*1 at 75 Hz 1024 x 768*1 at 60 Hz to 75 Hz 1152 x 864*1 at 70 Hz 1152 x 870*1 at 75 Hz NEC-Mitsubishi Electronics Display cites 1280 x 960*1 at 60 Hz to 75 Hz recommended resolution at 60 Hz for 1280 x 1024 at 60 Hz to 75 Hz optimal display performance. 338 mm/13.3 inches 270.3 mm/10.6 inches 100-240 V ~ 50/60 Hz 0.6 - 0.4 A/100-240V 375.4 mm (W) x 389 mm (H) x 180 mm (D) 14.8 inches (W) x 15.3 inches (H) x 7.1 inches (D) 4.6 kg 10.1 lbs 5°C to 35°C/41°F to 95°F 30% to 80% 0 to 10,000 Feet -10°C to +60°C/14°F to 140°F 10% to 85% 0 to 40,000 Feet *1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each dot on the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done. NOTE: Technical specifications are subject to change without notice. 13 AS52V72V92VManual080404.p65 13 8/5/04, 7:46 PM