NEC E232WMT-BK Users Manual
NEC E232WMT-BK Manual
 |
View all NEC E232WMT-BK manuals
Add to My Manuals
Save this manual to your list of manuals |
NEC E232WMT-BK manual content summary:
- NEC E232WMT-BK | Users Manual - Page 1
MultiSync E232WMT User's Manual - NEC E232WMT-BK | Users Manual - Page 2
...English-1 Registration Information...English-2 Recommended use...English-3 Contents...English-5 Quick Start...English-6 Controls...English-10 Specifications...English-13 Troubleshooting...English-14 TCO Certified Displays 6...English-16 Manufacturer's Recycling and Energy Information English-17 - NEC E232WMT-BK | Users Manual - Page 3
avoid any problems. CAUTION: Please use the power cord provided with this display in serviced in the country where it was purchased. Windows is a registered trademark of Microsoft Corporation. NEC is a registered trademark of NEC Corporation. ErgoDesign is a registered trademark of NEC Display - NEC E232WMT-BK | Users Manual - Page 4
equipment has been tested and found to instructions Problems NEC Display Solutions of America, Inc. Address: 500 Park Boulevard, Suite 1100 Itasca, Illinois 60143 Tel. No.: (630) 467-3000 Type of Product: Display Monitor Equipment Classification: Class B Peripheral Model: MultiSync E232WMT - NEC E232WMT-BK | Users Manual - Page 5
a safe location then refer servicing to qualified service personnel under the following conditions. not operate normally by following operating instructions. • Allow adequate ventilation around the . NOTE: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends using a moving screen - NEC E232WMT-BK | Users Manual - Page 6
THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: • For optimum performance, allow 20 minutes for the display to warm up. • Adjust the monitor height so that the top of the screen is at or slightly below eye level. Your eyes should look - NEC E232WMT-BK | Users Manual - Page 7
new NEC monitor box* should contain the following: • MultiSync monitor with tilt/height adjust stand • Power Cord*1 • Video Signal Cable (DVI-D to DVI-D cable)*2 • Video Signal Cable (Mini D-SUB 15 pin to Mini D-SUB 15 pin) • USB Cable*3 • Audio Cable (ø 3.5 stereo mini plug) • Setup Manual. Mini - NEC E232WMT-BK | Users Manual - Page 8
to your system, follow these instructions: NOTE: Make sure to read "Recommended use" (page 3) before installation. 1. Turn off the power of your computer. 2. For a PC with DVI digital output: Connect the DVI signal cable to the connector of the display card in your system (Figure A.1). Tighten - NEC E232WMT-BK | Users Manual - Page 9
display of this manual for driver is automatically installed on the computer and the touch panel, camera, and microphone are activated. When it is connected for the first time, it may take time for the computer to recognize the monitor. • If you have any problems, please refer to the Troubleshooting - NEC E232WMT-BK | Users Manual - Page 10
for use with a flexible arm. To prepare the monitor for alternate mounting purposes: • Follow the instructions provided by the manufacturer of the display mount. • To meet the safety requirements, the mounting stand must be able to support the weight of the monitor and be UL-certified. English-8 - NEC E232WMT-BK | Users Manual - Page 11
Figure S.3). NOTE: In order to avoid stand drop, when removing screws, please support stand with your hand. 6. Remove the stand (Figure S.4). 7. The monitor monitor is designed for use with a flexible arm. 1. Follow the instructions on how Remove Monitor Stand for Mounting to remove the stand. 2. - NEC E232WMT-BK | Users Manual - Page 12
Controls OSD (On-Screen Display) control keys on the side of the monitor function are as follows: To access OSD menu, press the MENU key. To change signal input, press - NEC E232WMT-BK | Users Manual - Page 13
horizontal image position within the display area of the LCD. V. Position (Analog input only) Controls vertical image position within the display area of the LCD. a single standard RGB color space. With this color-supported environment, the user could easily and confidently communicate color - NEC E232WMT-BK | Users Manual - Page 14
control settings back to the factory settings. Information Provides information about the current resolution display and the horizontal and vertical frequencies. Indicates the model name and serial numbers of your This function gives a warning when the input video signal is not supported. English-12 - NEC E232WMT-BK | Users Manual - Page 15
Specifications English Monitor Specifications MultiSync E232WMT Notes LCD Module Diagonal: 58.42 cm/23.0 inches Viewable Image Size: 58.42 cm/23.0 inches Native Resolution (Pixel Count): 1920 x 1080 Active matrix; thin film transistor (TFT) liquid crystal display (LCD); 0.265 mm dot pitch; - NEC E232WMT-BK | Users Manual - Page 16
to erase the image. NOTE: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends using a moving screen saver at regular intervals sure that a supported mode has been selected on the display card or system being used. (Please consult display card or system manual to change graphics - NEC E232WMT-BK | Users Manual - Page 17
. Refer to your USB devise User's Manual. • Check if the USB upstream port POWER key to restart the display. Do not touch the touch panel until the screen is displayed. The speaker volume is is properly connected. • If using Windows 7, apply Service Pack (SP1). The microphone volume is too high or - NEC E232WMT-BK | Users Manual - Page 18
for user comfort (displays, headsets) Acoustic performance - protection against sound spikes (headsets) and fan noise (projectors, computers) Ergonomically designed keyboard (notebooks) Electrical Safety, minimal electro-magnetic Emissions Third Party Testing All certified product models - NEC E232WMT-BK | Users Manual - Page 19
Maximum Operation Normal Operation (at TCO testing) Energy Saving Mode Off Mode Power consumption LED colour 52 W Blue 23 W Default setting, USB/Audio signal cables or power cords. When you need to dispose of your NEC display products, please follow the guidance of your local authority, or ask
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
 |
 |
MultiSync E232WMT
User’s Manual