NEC E328 User Manual
NEC E328 Manual
 |
View all NEC E328 manuals
Add to My Manuals
Save this manual to your list of manuals |
NEC E328 manual content summary:
- NEC E328 | User Manual - Page 1
User's Manual LCD TV MODEL: E328 E438 E498 E558 E658 - NEC E328 | User Manual - Page 2
Table of Contents Important Information 2 Recommended Use & Maintenance 9 Chapter 1 Installation Setup Overview 11 Mounting (for Customer 14 Prevent Tipping 14 Mounting (for Trained Installers 15 Mounting Location 16 Orientation 17 Ventilation Requirements 18 Mounting on Walls or - NEC E328 | User Manual - Page 3
Troubleshooting When a problem occurs with the monitor 58 Nothing is displayed 58 The image is not displayed correctly 59 An instruction Compatible Signal List 63 E328 65 E438 66 E498 67 E558 68 E658 69 Appendix A Trademark and your old NEC product 84 Energy Saving 84 About Conversion - NEC E328 | User Manual - Page 4
device. Use the attached specified cables with the E658 / E558 / E498 / E438 / E328 of LCD TV so as not to interfere those specified by NEC Display Solutions of America, Inc. in this manual. Failure to comply and used in accordance with the instructions, may cause harmful interference to radio - NEC E328 | User Manual - Page 5
: About the Symbols To ensure safe and proper use of the product, this manual uses a number of symbols to prevent injury to you and others as well you to electric shock, fire, or other risks. Refer all servicing to qualified service personnel. Do not use the product if it has structural damage. - NEC E328 | User Manual - Page 6
with this product, please contact NEC. For all other 6 cases, please to use a trained service person. 7 Failure to or other mounting accessory for support. • When installing the optional more people for the E328/E438/E498/E558 and four or more people refer to the instructions included with the - NEC E328 | User Manual - Page 7
to a wall using a cord or chain that can support the weight of the product in order to prevent the preventing tipping. Please refer to the table top stand manual. • Use commercially-available clamps and screws (M6) to in accordance with the installation instructions. Many injuries, particularly to - NEC E328 | User Manual - Page 8
the cabinet or use your product near water. 12 Immediately turn off the power and unplug your product from the wall outlet, then refer servicing to qualified service personnel. It may cause an electric shock or start a fire. 13 Do not use flammable gas sprays to remove dust when cleaning the - NEC E328 | User Manual - Page 9
CAUTION Handling the power cord. Handle the power cord with care. Damaging the cord could lead to fire or electric shock. • When connecting the power cord to the product's AC IN terminal, make sure the connector is fully and firmly inserted. • Fasten the power cord to the product by attaching - NEC E328 | User Manual - Page 10
for the mast and supporting structure, grounding of the NEC National Electric Code Antenna lead-in wire 14 Ground clamp Antenna discharge unit (NEC Section 810-20) Electric service equipment Grounding conductors (NEC Section 810-21) Ground clamps Power service grounding electrode system (NEC - NEC E328 | User Manual - Page 11
NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol warns user that uninsulated included. Therefore, it should be read carefully in order to avoid any problems. CAUTION: Please use the power cord provided with this TV in - NEC E328 | User Manual - Page 12
Recommended Use & Maintenance Recommended Use Ergonomics To realize the maximum ergonomic benefits, we recommend the following: • For optimum performance of the monitor, allow 20 minutes for warming up. Avoid reproduction of still patterns on the monitor for long periods of time to avoid image - NEC E328 | User Manual - Page 13
or Ceilings" on page 19 >> "Installing and Removing the Optional Table Top Stand" on page 20 NOTE: For box contents, please refer to the Setup Manual. Product warranty does not cover damage caused by improper installation. English - 10 - NEC E328 | User Manual - Page 14
external equipment • To protect the external equipment, disconnect the power cord of the monitor before making connections. • Refer to the user's manual of your equipment for further information. NOTE: Do not connect or disconnect cables when the monitor's main power or other external equipment - NEC E328 | User Manual - Page 15
core. For the HDMI and AV cables, use shielded signal cables. The use of other types of cables and adapters may cause reception problems. 6. Turn the power button on Switch on the monitor power before turning the computer or external equipment on. 7. Operate the connected external equipment - NEC E328 | User Manual - Page 16
9. Adjust the picture settings • When using video input terminals (HDMI1, HDMI2, HDMI3, Media Player), adjustment is not required. • When using an HDMI input terminal, select the appropriate setting between [Mode 0], [Mode 1], and [Mode 2] in [EDID] under [HDMI Settings] in the [Setup] OSD menu. 10. - NEC E328 | User Manual - Page 17
problem is detected, refer to the qualified personnel or the supplier for service. • Depending on the environment, the mounting location may weaken due to natural degradation. Regularly ask the qualified personnel to inspect the mounting location and carry out maintenance. NEC E498/E438/E328 E498/ - NEC E328 | User Manual - Page 18
all walls or ceilings are capable of supporting the weight of the monitor. The • For detailed information, refer to the instructions included with the mounting (B) equipment. • There Screw (A) Thickness of the bracket and washers E328 E438 E498 E558 E658 Screw Size (A) (B) M6 13-15 mm - NEC E328 | User Manual - Page 19
Installing a safety wire When installing the monitor to a wall or a ceiling, use commercially-available wall or ceiling mounting brackets, but also a safety wire. WARNING: Please refer to "WARNING 9". CAUTION: Please refer to "CAUTION 7". When attaching the safety wire to the monitor's handle, - NEC E328 | User Manual - Page 20
Orientation The monitor cannot be used in the portrait orientation. WARNING: Do not install it in the portrait orientation. Otherwise, it may cause a malfunction. WARNING: Do not install the monitor upside down. The monitor cannot be used when inclined 10° or more. WARNING: Installing the - NEC E328 | User Manual - Page 21
Ventilation Requirements When mounting the monitor in an enclosed space or recessed area, leave adequate room between the monitor and the enclosure to allow heat to disperse, as shown below. 300 mm 100 mm 100 mm 600 mm 100 mm ≤ 40°C NOTE: The maximum environmental operating temperature of the - NEC E328 | User Manual - Page 22
on top of the soft cloth. 3. Install the commercially-available mounting brackets. E658/E558 4 installations holes M6 (E558/E658) 200 mm (E558) 400 mm (E658) E498/E438/E328 4 installations holes M6 (E328/E438/E498) 400 mm (E558) 600 mm (E658) 100 mm (E328) 200 mm (E438 - NEC E328 | User Manual - Page 23
so that the panel is facing downward. NOTE: The monitor can only be used in the landscape orientation with the table top stand. E658 E558 E498 E438 E328 ST-55E (screws are included) ST-32E2 (screws are included) Table top stand E658/E558 Table Blanket - NEC E328 | User Manual - Page 24
Chapter 2 Parts Names and Functions This Chapter Includes: >> "Control Panel" on page 22 >> "Terminal Panel" on page 23 >> "Wireless Remote Control" on page 24 English - 21 - NEC E328 | User Manual - Page 25
Control Panel 3 4 12 1 Button (power button) Switches between power on and standby. 2 MENU/EXIT Button Opens the OSD menu when the OSD menu is closed. Returns to the previous OSD menu when the OSD menu is open. 3 Arrow Keys/SET Button (input switch button) Central/SET: Operates as the setting - NEC E328 | User Manual - Page 26
to a public network (including via routers rented by an Internet service provider). This is the reason why connecting the wired LAN port from the HDMI1 ARC terminal. Use the included ARC-supported HDMI cable. The audio equipment supporting ARC, such as AV amplifiers, will output the monitor - NEC E328 | User Manual - Page 27
Wireless Remote Control 1 4 7 9 ! 0 %$ (* = 3 2 6 5 8 # @ &^ -) 1 POWER Button Switches between power on and off (standby). NOTE: To completely turn the power off, disconnect the power plug from the outlet. 2 SOURCE Button Cycles through the available inputs. The input names are shown as - NEC E328 | User Manual - Page 28
, the computer and the external equipment before connecting the monitor to the computer. • Refer to the externals equipment's user manuals for available connection types and instructions for each piece of equipment. NOTE: • When the audio output connector of the connected audio device or computer - NEC E328 | User Manual - Page 29
Wiring Diagram VHF/UHF Antenna or Cable TV Use 75-Ohm coaxial cable USB storage device Computer (stereo mini jack) Computer (D-sub) Video player (stereo mini-jack) Video player (component) Computer (RS-232C) Power supply to external equipment: 5 V/3 A (max) Video player (composite) AV amplifier - NEC E328 | User Manual - Page 30
The monitor can be connected to and used with video players and computers equipped with an HDMI output. For more information, refer to the user's manual of the player or the other devices. • Use an HDMI cable with the HDMI logo. • It may take a moment for the signal to appear after - NEC E328 | User Manual - Page 31
compatibility with its own monitors or TVs. See "HDMI-CEC Command" (page 30). When supported, the monitor's remote control can be used to control the video device. NOTE: The instructions in this section guide you through configuring [CEC] in the monitor's OSD menu. These settings can also be - NEC E328 | User Manual - Page 32
connected are shown with the device name. If no HDMI-CEC compatible device is found, make sure the device is connected, turned on, that it supports CEC, and that CEC is enabled.Depending on the manufacturer, the CEC feature may have a different name. Refer to the device's user - NEC E328 | User Manual - Page 33
device is recording, the device remains on. Refer to the user's manual supplied with the HDMI-CEC compatible device for further information. Connect audio equipment function to the HDMI1 (ARC) terminal using the included ARC-supported HDMI cable. The Volume buttons of the remote control can control - NEC E328 | User Manual - Page 34
storage device. See page page 41 for instructions on using the Media Player. Compatible USB how to format a storage device, see the manual or the help section of your Windows®. Use of the USB storage device is larger than the supported size shown below, use a commercially-available USB extension - NEC E328 | User Manual - Page 35
Connecting a USB Device Connect a USB storage device to the USB Type-A of the monitor as shown in the figure below to display images and videos using the Media Player function. CAUTION: Please refer to "CAUTION 2". USB Type-A port NOTE: • Check the connector shape and orientation when - NEC E328 | User Manual - Page 36
Chapter 4 Basic Operation This Chapter Includes: >> "Power On and Off Modes" on page 34 >> "Operating Range for the Remote Control" on page 36 >> "Showing the Information OSD" on page 37 >> "Switching Between Sound Modes" on page 37 >> "Switching Between Picture Modes" on page 37 >> "Setting the - NEC E328 | User Manual - Page 37
Power On and Off Modes Power indicator status The monitor operates as follows in On mode when no signal is input from an external device. Mode Power indicator Normal operation (On mode) Lit blue Auto power save mode (energy-saving mode) Flashing red Auto standby mode (energy-saving mode) Lit - NEC E328 | User Manual - Page 38
When [LAN] is selected for control and [Power supply] is set to [Off] Home mode • When no signal is input, "No signal" is displayed and the monitor enters the auto power save mode after a while. • During auto power save mode, the monitor enters the auto standby mode if no LAN signal is received for - NEC E328 | User Manual - Page 39
Operating Range for the Remote Control Point the top of the remote control toward the monitor's remote control sensor during button operation. Use the remote control within a distance of about 7 m (23 ft.) from the remote control sensor, or within a horizontal and vertical angle of 30° and within - NEC E328 | User Manual - Page 40
Showing the Information OSD The Information OSD provides information such as the selected video input terminal, resolution, and IP address. Press the INFO button of the remote control to bring up the information OSD. HDMI1 1080p@60Hz SDR IP ADDRESS : 192.xxx.x.xx 1 2 1 Input name 3 4 2 - NEC E328 | User Manual - Page 41
Setting the Aspect Ratio Press the ASPECT button of the remote control to change the Aspect Ratio setting between Normal, 1:1, Full, and Zoom. NOTE: This setting cannot be changed when [Media Player] is selected for the input signal. Video signal 4444000099996666 Normal 1:1 Full Zoom The - NEC E328 | User Manual - Page 42
Contrast Video Black Level Sharpness Color Tint Reset Video Settings HDR Video Dynamic Standard Energy Savings Conferencing HighBright Custom Adjustment settings Key guide Move OK Select MENU Return EXIT EXIT Wireless Remote Control Press MENU to open and close the OSD menu. Press the EXIT - NEC E328 | User Manual - Page 43
more details on the content of the menu, see "OSD Controls List" (page 72). Video settings: Select one of the default picture modes, manually adjust the color settings, adjust the aspect ratio, and adjust the other settings related to the image. Audio settings: Adjust the volume, balance, equalizer - NEC E328 | User Manual - Page 44
Using the Media Player Menu The Media Player plays image, video, and music files located on a USB storage device connected to the USB Type-A port of the monitor (page 23). To open the Media Player menu, press the SOURCE button of the remote control and select [Media Player]. NOTE: Connect the - NEC E328 | User Manual - Page 45
• Only use USB mass storage class devices. • We cannot guarantee to support all commercially-available USB mass storage devices. • Do not use a USB use a multi-partition USB storage device. • The USB Type-A port of the monitor supports 5 V / 500 mA. When using a USB device of more than 500 mA, - NEC E328 | User Manual - Page 46
with a combination of max bit rate of video and audio. Max resolution (H x V) of image 15,360 x 8,640 pixels 9,600 x 6,400 pixels Max channel No. 2 ch Supported audio codec LPCM, MP3, AAC LPCM, MP3, AAC LPCM, MP3, AAC WMA 9, WMA 10 Pro NOTE: Sometimes, it may not be possible to play a video - NEC E328 | User Manual - Page 47
Chapter 5 Advanced Operation This Chapter Includes: >> "Creating a Power Schedule" on page 45 >> "Using Picture Modes" on page 46 >> "Setting Security and Locking the Monitor Controls" on page 47 >> "Locking the Button Controls" on page 48 English - 44 - NEC E328 | User Manual - Page 48
Creating a Power Schedule The schedule function allows the monitor to automatically switch between power on and standby mode at different times. To program the schedule: 1. Enter the [SCHEDULE] menu in the OSD menu. a. Use the p/q buttons of the remote control to select [Current Time settings]. b - NEC E328 | User Manual - Page 49
Using Picture Modes There are different picture modes available. They have been configured for different applications as described in the "Picture Mode Types" table below. To change picture modes: In the OSD menu, go the [Video] -> [Picture Mode], or press the PICTURE button of the remote control to - NEC E328 | User Manual - Page 50
Setting Security and Locking the Monitor Controls Under normal operation, the monitor can be controlled by any person using the remote control or the monitor control panel. You can prevent unauthorized use and changes to the monitor settings by enabling the security and lock settings. The security - NEC E328 | User Manual - Page 51
Locking the Button Controls The lock settings prevent the monitor from responding to button presses on the remote control or monitor control panel. When locking the button controls, some buttons can be configured to remain unlocked. Locking and unlocking the button controls do not require a password - NEC E328 | User Manual - Page 52
Locking the Remote Control Buttons The [IR Lock Settings] prevent the monitor from being controlled using the remote control. HDMI1 Setup Input Labels Key Lock Settings IR Lock Settings Power supply LED Indicator Mute Settings Thermal Management Signal Information Off Mode 1 Mode 2 Move OK - NEC E328 | User Manual - Page 53
Chapter 6 External Control This Chapter Includes: >> "Controlling the Monitor via RS-232C" on page 51 >> "Controlling the Monitor via LAN" on page 52 >> "HTTP Browser" on page 53 >> "Commands" on page 56 Connecting an external device There are two options to connect an external device to control the - NEC E328 | User Manual - Page 54
monitor via commands sent from a computer connected with an RS-232C cable, use the control commands. Instructions for the control commands can be found in "Commands" in "External Control" in this manual or in "External_ Control.pdf" (see "Appendix B External Resources" page 71). Computer RS-232C RS - NEC E328 | User Manual - Page 55
Pin Assignment RS-232C input / output Pin No. 1 2 3 4 5 6 7 8 9 Name NC RXD TXD NC GND NC NC NC NC D-sub 9-pin (monitor side) This monitor uses RXD, TXD and GND lines for RS-232C control. Controlling the Monitor via LAN The monitor is equipped with a LAN port (RJ-45). Connecting - NEC E328 | User Manual - Page 56
URL in the Web address field. Network Settings http:// NOTE: • The control software can be downloaded from the NEC Display website. • By default, the IP address of the monitor is set automatically. After a reset, the IP address is obtained automatically. • Depending on - NEC E328 | User Manual - Page 57
Screen Adjustment Using a Browser Access the following address to show HOME. Click the links on the left-hand column on the HOME screen to access the setting screens. http:// The default login password is "admin". OSD Menu Settings in the Monitor Web Controls The - NEC E328 | User Manual - Page 58
network but the DNS is set manually. NOTE: Consult your network administrator if you have any trouble with the connection. IP ADDRESS setting screen. AMX BEACON When the monitor is connected to a network supporting the NetLinx control system by AMX, enables or disables the function to - NEC E328 | User Manual - Page 59
to a network via LAN allows for the transmission of commands to the monitor, providing remote control of the monitor from a connected device. Instructions for each command format can be found in "External_Control.pdf" in our Website (see "Appendix B External Resources" page 71). RS-232C Interface - NEC E328 | User Manual - Page 60
Chapter 7 Troubleshooting This Chapter Includes: >> "When a problem occurs with the monitor..." on page 58 >> "Nothing is displayed..." on page 58 >> "The image is not displayed correctly..." on page 59 >> "An instruction or caution screen is displayed..." on page 60 >> "Others (when connected to a - NEC E328 | User Manual - Page 61
When a problem occurs with the monitor... In such a case, refer to the following. Nothing is displayed... Symptom Nothing is displayed on the screen. The image on the - NEC E328 | User Manual - Page 62
image is not displayed correctly (problems not mentioned above) or the display installation and connection" in the NEC Display Solutions Website. Display the OSD menu x 2160 or 4096 x 2160 resolution is input, use an HDMI cable supporting 4K. Check the setting in [Setup] -> [Power save settings] - NEC E328 | User Manual - Page 63
An instruction or caution of the monitor since P.79 operation guaranteed temperature. this problem may cause a malfunction. Warning!! The internal temperature is on the reinstallation procedure, refer to the computer manual or the support service for the computer. Others (remote control, speakers - NEC E328 | User Manual - Page 64
. Cause and solution Check that the external device (video player, etc.) is correctly connected and operates properly. For more information, see the manual of the external device. The power management function of the monitor may be functioning. Check that the external device is operating (playing - NEC E328 | User Manual - Page 65
Chapter 8 Specifications This Chapter Includes: >> "Compatible Signal List" on page 63 >> "E328" on page 65 >> "E438" on page 66 >> "E498" on page 67 >> "E558" on page 68 >> "E658" on page 69 English - 62 - NEC E328 | User Manual - Page 66
50 50 60 50 60 24 25 30 50 60 24 25 30 50 60 24 25 30 50 60 Component ● ● E328 E438 HDMI video E498 ● E558 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● E658 English - 63 - NEC E328 | User Manual - Page 67
60 E328 ● - * RB: Reduced blanking signal E438 - ● VGA E498 E558 - ● E658 - ● E328 HDMI PC E438 E498 E558 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● - - - ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● E658 NOTE: • Depending on the input - NEC E328 | User Manual - Page 68
Hz, 75 Hz (digital input) 13.5 MHz, 25 MHz - 156 MHz (analog input) 25 MHz - 156 MHz (digital input) VHF/UHF Antenna or Cable TV Service 0.7 Vp-p/75 Ω Luma Y: 1.0 Vp-p/75 Ω, Color Cb/Cr (Pb/Pr): 0.7 Vp-p/75 Ω 1.0 Vp-p/75 Ω HDCP 1.4/2.2 Stereo L/R 0.5 Vrms PCM 2 ch 32, 44.1, 48 kHz (16/20 - NEC E328 | User Manual - Page 69
Hz, 75 Hz (digital input) 13.5 MHz, 25 MHz - 162 MHz (analog input) 25 MHz - 600 MHz (digital input) VHF/UHF Antenna or Cable TV Service 0.7 Vp-p/75 Ω Luma Y: 1.0 Vp-p/75 Ω, Color Cb/Cr (Pb/Pr): 0.7 Vp-p/75 Ω 1.0 Vp-p/75 Ω HDCP 1.4/2.2 Stereo L/R 0.5 Vrms PCM 2 ch 32, 44.1, 48 kHz (16/20 - NEC E328 | User Manual - Page 70
E498 Size (display size) Type of LCD Viewable Size Resolution (digital input) 13.5 MHz, 25 MHz - 162 MHz (analog input) 25 MHz - 600 MHz (digital input) VHF/UHF Antenna or Cable TV Service 0.7 Vp-p/75 Ω Luma Y: 1.0 Vp-p/75 Ω, Color Cb/Cr (Pb/Pr): 0.7 Vp-p/75 Ω 1.0 Vp-p/75 Ω HDCP 1.4/2.2 Stereo - NEC E328 | User Manual - Page 71
Hz, 75 Hz (digital input) 13.5 MHz, 25 MHz - 162 MHz (analog input) 25 MHz - 600 MHz (digital input) VHF/UHF Antenna or Cable TV Service 0.7 Vp-p/75 Ω Luma Y: 1.0 Vp-p/75 Ω, Color Cb/Cr (Pb/Pr): 0.7 Vp-p/75 Ω 1.0 Vp-p/75 Ω HDCP 1.4/2.2 Stereo L/R 0.5 Vrms PCM 2 ch 32, 44.1, 48 kHz (16/20 - NEC E328 | User Manual - Page 72
Hz, 75 Hz (digital input) 13.5 MHz, 25 MHz - 162 MHz (analog input) 25 MHz - 600 MHz (digital input) VHF/UHF Antenna or Cable TV Service 0.7 Vp-p/75 Ω Luma Y: 1.0 Vp-p/75 Ω, Color Cb/Cr (Pb/Pr): 0.7 Vp-p/75 Ω 1.0 Vp-p/75 Ω HDCP 1.4/2.2 Stereo L/R 0.5 Vrms PCM 2 ch 32, 44.1, 48 kHz (16/20 - NEC E328 | User Manual - Page 73
, Dolby Audio, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. NaViSet is a trademark or registered trademark of NEC Display Solutions, Ltd. in Japan and other countries. Blu-ray is a trademark of Blu-ray Disc Association. All other brands and product - NEC E328 | User Manual - Page 74
product manual are listed below. NEC Display Solutions regional Websites Japan: https://www.nec-display.com/jp/ Additional Documentation "NEC LCD powerful network-based control, monitoring and asset management system for NEC Display monitors and projectors. The software is available for Microsoft - NEC E328 | User Manual - Page 75
Appendix C OSD Controls List This Chapter Includes: >> "Video Settings" on page 73 >> "Audio Settings" on page 75 >> "Setup" on page 77 >> "Control Settings" on page 80 >> "Media Player" on page 81 >> "Schedule" on page 82 See the NEC Display Solutions Website for the default values. English - 72 - NEC E328 | User Manual - Page 76
. Select the aspect ratio of the screen image. For more information, see "Setting the Aspect Ratio" in this manual. NOTE: • [Zoom] cannot be used when a 4K signal is input. (E438/E498/E558/E658) • [Zoom] cannot be used when an FHD signal is input. (E328) Maximizes the size without changing - NEC E328 | User Manual - Page 77
Video Color Temperature Cool Normal Warm Native Custom Noise Reduction Adaptive Contrast Gamma Native 2.2 2.4 Ambient Light Sensing Color Enhance HDR Mode Backlight / Brightness Contrast Video Black Level Sharpness Color Tint Reset Video Settings Adjusts the color temperature of the entire screen. - NEC E328 | User Manual - Page 78
terminal is used. Adjusts the delay time until the audio is output. Select audio sources in analog channels. Select to turn On/Off support methods for visual impaired. (Only available for digital channels) Enable speech function for OSD menu and certain operations. Select language options in digital - NEC E328 | User Manual - Page 79
Channels Channels Auto Channel Scan Add / Skip Channels Favorite Channels Channel Labels Time Zone Automatically search the available channels. Manually add or skip channels to the channel list. Add channels to your favorite channel list. Create labels to any channel. Select the time zone area - NEC E328 | User Manual - Page 80
. Press the INFO button of the remote control to display the selected input terminal on the Information OSD. The input terminal is changed manually. If the signal is lost in the input terminal being displayed, the monitor searches automatically another terminal with an input signal and switches - NEC E328 | User Manual - Page 81
VGA Options VGA Mode Auto Adjust H.Position V.Position Clock Phase H.Resolution V.Resolution Reset VGA Options This function makes it possible to control a device supporting HDMI CEC connected to the HDMI terminal. When set to On, HDMI CEC is enabled. Sets the HDMI mode. Mode 0: Max resolution is - NEC E328 | User Manual - Page 82
Setup Other settings Input Labels Key Lock Settings IR Lock Settings Power supply LED Indicator Mute Settings Thermal Management Signal Information Monitor Information Factory Reset Renames the input terminal currently being displayed. Letters (A-Z), numbers (0-9), and some symbols can be used. - NEC E328 | User Manual - Page 83
. On: Obtains the network settings from the DHCP server on the network. Off: Sets fixed networks settings. Manual DNS: Obtain the network settings from the DHCP server on the network but the DNS is set manually. Set the IP address of the monitor when [DHCP] is set to [Off]. Set the subnet - NEC E328 | User Manual - Page 84
connected. Select [Execute] before removing the USB device. Sets whether to display a caution window (On) or not (Off) when a file with a format or a codec not supported by the monitor is played. English - 81 - NEC E328 | User Manual - Page 85
Schedule Schedule Sleep Timer Current Time settings Schedule settings Sets the time until the monitor turns off automatically. Off, 10 minutes, 15 minutes, 30 minutes, 60 minutes, 90 minutes, 120 minutes, 180 minutes, 240 minutes can be selected. Sets the current time. NOTE: If the monitor - NEC E328 | User Manual - Page 86
" on page 84 >> "Energy Saving" on page 84 >> "About Conversion Cables Used with the AV Terminal" on page 85 NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company's top priorities in trying to minimize the burden placed - NEC E328 | User Manual - Page 87
recycling sites ensure that environmentally harmful components are properly handled and securely disposed. To ensure the best recycling of our products, NEC DISPLAY SOLUTIONS offers a variety of recycling procedures and gives advice on how to handle the product in an environmentally sensitive way - NEC E328 | User Manual - Page 88
About Conversion Cables Used with the AV Terminal Use a commercially-available video cable with a 4-contact mini jack (φ3.5 mm) at one extremity for conversion cables to connect to the AV terminal. Check the wiring specification of the cable in advance and choose a proper cable. NOTE: *Different - NEC E328 | User Manual - Page 89
English - 86 Rev.1
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
 |
 |
User’s Manual
LCD TV
MODEL:
E328
E438
E498
E558
E658