NEC E651-T User Manual
NEC E651-T Manual
 |
View all NEC E651-T manuals
Add to My Manuals
Save this manual to your list of manuals |
NEC E651-T manual content summary:
- NEC E651-T | User Manual - Page 1
Large Format Display User's Manual E651-T Please find your model name in the label on the backside of monitor. - NEC E651-T | User Manual - Page 2
Ergonomics...English-3 Cleaning the LCD Panel...English-3 Cleaning the Cabinet Player or Computer with HDMI out English-14 For using Touch Panel...English-14 Basic Operation...English-15 Power ON and -21 Troubleshooting...English-22 Specifications - E651-T...English-24 Appendix - Supported Media... - NEC E651-T | User Manual - Page 3
NEC Display Solutions of America, Inc. Address: 500 Park Boulevard, Suite 1100 Itasca, Illinois 60143 Tel. No.: (630) 467-3000 Type of Product: Display Monitor Equipment Classification: Class B Peripheral Model: E651 with the instructions, may -TV Interference Problems." This booklet - NEC E651-T | User Manual - Page 4
CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC read carefully in order to avoid any problems. CAUTION: Please use the power cord provided with this monitor in accordance with the table below. If - NEC E651-T | User Manual - Page 5
and reflections. • Clean the LCD monitor surface with a lint-free, non-abrasive cloth. Avoid using any cleaning solution or glass cleaner! • Adjust the monitor's brightness, contrast and sharpness controls to enhance readability. • Avoid displaying fixed patterns on the monitor for long periods of - NEC E651-T | User Manual - Page 6
Manual Setup Manual Power Cord*1 Setup Manual Wireless Remote Control and AAA Batteries x 2 Stylus pen*2 x 4 * Remember to save your original box and packing material to transport or ship the monitor. *1 Type and number of power cords included will depend on the where the LCD monitor the touch - NEC E651-T | User Manual - Page 7
occur with the mounting apparatus. If a problem is detected, please refer to qualified personnel for service. • Regularly check the mounting location for signs of damage or weakness that may occur over time. Orientation • When using the display in the portrait position, the monitor should be rotated - NEC E651-T | User Manual - Page 8
the protective sheet on the table underneath the LCD. The protective sheet was wrapped around the LCD in the original packaging. Make sure there is nothing on the table that can damage the monitor. When using mounting accessories other than NEC compliant and approved, they must comply with the - NEC E651-T | User Manual - Page 9
English Parts Name and Functions Control Panel 1 2 3 4 5 6 7 1 MENU button (MENU) Turns on/off the OSD menu. 2 SOURCE button (SOURCE) Acts as INPUT button within OSD menu. (Toggle switches between [HDMI1], [HDMI2], [HDMI3], [VGA], [USB]). These are available input only, shown as their factory - NEC E651-T | User Manual - Page 10
red when the LCD is in POWER OFF mode. Glows amber when the monitor is in Power Save Mode. Green and Amber blink alternately while in Power Standby mode with the "Scheduler" function enabled. When a component failure is detected within the monitor, the indicator will blink red. K Service port This - NEC E651-T | User Manual - Page 11
functions when a media file is being played. Fast backward ( ), play ( ), fast forward ( ), previous ( ), stop ( ), pause ( ), next ( ). P MEDIA CONTROL buttons Display control functions for a specific menu. The function of each button is displayed in the color of the button on the OSD. English-9 - NEC E651-T | User Manual - Page 12
Operating Range for the Remote Control Points the top of the remote control toward the LCD monitor's remote sensor during button operation. Uses the remote control within a distance of about 7 m (23 ft.) from remote control sensor or at a horizontal and vertical angle - NEC E651-T | User Manual - Page 13
LCD. IMPORTANT: Lay the protective sheet, which was wrapped around the LCD monitor when it was packaged, beneath the LCD monitor or bursting. NEC recommends the following Do not touch exposed battery manual for further information. NOTE: Do not connect/disconnect cables when turning on the monitor - NEC E651-T | User Manual - Page 14
power of the computer first. 6. Operate the attached external equipment Display the signal from the desired input source. 7. Adjust the sound "Scheduler". NOTE: You can set OSD Rotation, Menu Language, Time Format, Clock, Remote Operation, Keypad Operation, and Anti-Image Retention in "Initial - NEC E651-T | User Manual - Page 15
in a loss of the monitor image. Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor turns down the sound. Before making connections: * First turn off the power of all the attached equipment and make connections. * Refer to the user manual included with each - NEC E651-T | User Manual - Page 16
PC. For using Touch Panel 1. Turn off the monitor. 2. Install the equipment.*1 • Connect the A type connector to the downstream port on the external computer (Figure 1). 3. Turn on the monitor. *1: Please contact your NEC customer support for more detailed information. Monitor Setting Select the - NEC E651-T | User Manual - Page 17
English Basic Operation Power ON and OFF Modes The LCD monitor power indicator will turn green while powered on and will turn red or amber while powered off. NOTE: The Main Power Switch must be in the ON position in order to power up the monitor using the remote control or the Power Button - NEC E651-T | User Manual - Page 18
. *2 VGA input only. Green*1 Red Amber Green and Amber blink alternately Red Blinking (See Troubleshooting page 22) Using Power Management The LCD monitor follows the VESA approved DPM Display Power Management function. The power management function is an energy saving function that automatically - NEC E651-T | User Manual - Page 19
on the OSD Screen Make sure that the power indicator lights in green and the power to the monitor is on. Step Wireless Remote Control Keypad Operation 1 Press the [MENU] button to display the OSD screen. Press the up ( )/down ( ) button to select an item in the main menu. 2 Press the - NEC E651-T | User Manual - Page 20
Step Wireless Remote Control Keypad Operation 4 Press the [OK] button to determine the selected item in the sub menu. Press the [SOURCE] button to determine the selected item in the sub menu. 5 Press the left ( )/right ( ) button to select a setting and press the [OK] button to determine the - NEC E651-T | User Manual - Page 21
OSD Rotation Menu Language Time Format Clock Remote Operation Keypad Operation number. For example schedule #7 will have priority over schedule #1. • Set [Priority1] to [Priority5] ([Priority1]: highest priority) as the priority of each signal. When the current source signal is lost, the display - NEC E651-T | User Manual - Page 22
long as the previous image was displayed. For example, if an image was on the monitor for one hour and a residual image remains, the monitor should be turned off for one hour to erase the image. As with all personal display devices, NEC DISPLAY SOLUTIONS recommends displaying moving images and using - NEC E651-T | User Manual - Page 23
monitor with a uniform color profile. This assures that the colors displayed on the monitor are exactly the same as on the color printout (with sRGB supporting you to connect your LCD monitor to any VESA standard (FDMIv1) third party mounting arm or bracket. NEC recommends using mounting interface - NEC E651-T | User Manual - Page 24
power-saving mode (touch the keyboard or mouse). • Check to see that the power indicator option in the OSD is set to ON. RED LED on monitor is blinking • A certain failure might have occurred, please contact your nearest authorized NEC DISPLAY SOLUTIONS service facility. • Monitor is powered off by - NEC E651-T | User Manual - Page 25
screen is not correct • Avoid direct sunlight or strong light on the screen. • If there are some obstacles near the TOUCH screen, it may malfunction. • Sensor bar module may be dusty or dirty (see page 14, Figure 1), wipe gently with a soft cloth. The computer's power management - NEC E651-T | User Manual - Page 26
- E651-T Product Specifications LCD Module 65" / IR scanning method Windows8, Windows7 Multi-touch More than 10 touches (limited accuracy) PC connector USB V2 Power Management VESA DPM Plug & Play VESA DDC2B Accessories Setup manual, Power Cord, Remote Control, AAA Battery x 2, Stylus - NEC E651-T | User Manual - Page 27
English Appendix - Supported Media Video specification File extension Container Video codec Maximum 8kHz - 48kHz Image specification File extension .jpg .png .bmp JPEG Codec (Format) PNG BMP Photo baseline progressive non-interlace interlace − Resolution 15360x8640 1024x768 9600x6400 - NEC E651-T | User Manual - Page 28
on our following websites: http://www.nec-display-solutions.com/greencompany/ (in Europe), http://www.nec-display.com (in Japan) or http://www.necdisplay.com (in USA). Energy Saving This monitor features an advanced energy saving capability. When a Display Power Management signal is sent to the - NEC E651-T | User Manual - Page 29
accordance with legislation. According the EU directive 2006/66/EC, the battery can't be disposed improperly. The battery shall be separated to collect by local service. English-27 - NEC E651-T | User Manual - Page 30
[IMPORTANT] Regarding the MPEG AVC Licenses Used with This Product 1. MPEG AVC THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE. SUCH LICENSE EXTENDS TO THIS PRODUCT ONLY AND ONLY TO THE EXTENT OF OTHER NOTICES WHICH MAY BE INCLUDED HEREIN. THE LICENSE DOES NOT EXTEND TO ANY OTHER
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
 |
 |
E651-T
User’s Manual
Large Format Display
Please find your model name in the label on the backside of monitor.