NEC EA244UHD-BKSV Users Manual

NEC EA244UHD-BKSV Manual

Get NEC EA244UHD-BKSV PDF manuals and user guides View all NEC EA244UHD-BKSV manuals
Add to My Manuals
Save this manual to your list of manuals

NEC EA244UHD-BKSV manual content summary:

  • NEC EA244UHD-BKSV | Users Manual - Page 1
    Desktop Monitor MultiSync EA244UHD User's Manual
  • NEC EA244UHD-BKSV | Users Manual - Page 2
    Quick Start...English-6 Controls ...English-11 Using the PICTURE MODE function English-19 Specifications ...English-20 Features ...English-21 Troubleshooting ...English-22 Using Multi Picture Function...English-24 Using the Zoom Function ...English-26 Using the Auto Brightness function English-28
  • NEC EA244UHD-BKSV | Users Manual - Page 3
    be read carefully in order to avoid any problems. CAUTION: Please use the power cord provided serviced in the country where it was purchased. Windows is a registered trademark of Microsoft Corporation. NEC is a registered trademark of NEC Corporation. ErgoDesign is a registered trademark of NEC
  • NEC EA244UHD-BKSV | Users Manual - Page 4
    in accordance with the instructions, may cause harmful interference and Resolve Radio-TV Interference Problems." This booklet is available from operation. U.S. Responsible Party: NEC Display Solutions of America, : Class B Peripheral Model: MultiSync EA244UHD (L243QT) We hereby declare that the
  • NEC EA244UHD-BKSV | Users Manual - Page 5
    a safe location then refer servicing to qualified service personnel under the following conditions. not operate normally by following operating instructions. • Allow adequate ventilation around the NOTE: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends using a moving screen
  • NEC EA244UHD-BKSV | Users Manual - Page 6
    CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: • For optimum performance, allow 20 minutes for the display to warm up. • Adjust the monitor height so that the top of the screen is at or slightly below eye
  • NEC EA244UHD-BKSV | Users Manual - Page 7
    Your new NEC monitor box* should contain the following: • MultiSync monitor with tilt/swivel/pivot/height adjust stand • Power Cord*1 • Video Signal Cable (DisplayPort cable) • USB Cable*2 • ControlSync Cable (ø 2.5 stereo micro plug) • Setup Manual. Power Cord*1 Setup Manual DisplayPort cable
  • NEC EA244UHD-BKSV | Users Manual - Page 8
    Quick Start To connect the LCD monitor to your system, follow these instructions: NOTE: Make sure to read "Recommended Use" (page 3) before installation. 1. Turn off the power of your computer. 2. For a PC with DisplayPort output: Connect the DisplayPort
  • NEC EA244UHD-BKSV | Users Manual - Page 9
    Caution section of this manual for proper selection of AC power cord. 8. Turn on the computer and the monitor by pressing the power key on the front bezel (Figure E.1). NOTE: If you have any problems, please refer to the Troubleshooting section of this User's Manual. Power Sign Figure E.1 English
  • NEC EA244UHD-BKSV | Users Manual - Page 10
    Raise and Lower Monitor Screen The monitor may be raised or lowered in either portrait or landscape mode. To raise or lower screen, place a hand on each side of the monitor and lift or lower to the desired height (Figure RL.1). NOTE: Handle with care when raising or lowering the monitor screen.
  • NEC EA244UHD-BKSV | Users Manual - Page 11
    with a flexible arm. To prepare the monitor for alternate mounting purposes: • Follow the instructions provided by the manufacturer of the display mount. • To meet the safety requirements, the mounting stand must be able to support the weight of the monitor and be UL-certified. Remove Monitor Stand
  • NEC EA244UHD-BKSV | Users Manual - Page 12
    Mount Flexible Arm This LCD monitor is designed for use with a flexible arm. 1. Follow the instructions on how Remove Monitor Stand for Mounting to remove the stand. 2. Use the 4 screws removed from the stand to attach the arm to the monitor (
  • NEC EA244UHD-BKSV | Users Manual - Page 13
    English Controls OSD (On-Screen Display) control keys on the front of the monitor function are as follows: To access OSD menu, touch any of the control keys. To change signal input, touch the SELECT key. NOTE: Exit OSD in order to change signal input. 1 Ambient Light Sensor Human Sensor 2 Power
  • NEC EA244UHD-BKSV | Users Manual - Page 14
    ECO TOOLS BRIGHTNESS Adjusts the overall image and background screen brightness. If ECO MODE is set to 1 or 2, a bar for CARBON FOOTPRINT will appear. CONTRAST Adjusts the overall image and background screen brightness by input signal level. ECO MODE Decreases the amount of power consumption by
  • NEC EA244UHD-BKSV | Users Manual - Page 15
    English HUMAN SENSING The sensor on the front side of the monitor detects the movement of a person by using the HUMAN SENSING function. The HUMAN SENSING has three settings: OFF: No human sensing. 1 (LIGHT): After it is detected that there is no person after a period of time, the monitor shifts to
  • NEC EA244UHD-BKSV | Users Manual - Page 16
    EXPANSION Sets the Zoom method. FULL: The image is expanded to full screen regardless of the resolution. ASPECT: The image is expanded without changing the aspect ratio. OFF: The image is not expanded. NOTE: FULL works only when MULTI PICTURE is OFF. RESPONSE IMPROVE Turns the Response Improve
  • NEC EA244UHD-BKSV | Users Manual - Page 17
    English SOUND INPUT This function selects AUDIO INPUT, HDMI or DISPLAYPORT. NOTE: According to the screen type, you can change which audio input signal is routed through the built-in speakers. 1 screen (MULTI PICTURE is OFF): Outputs the audio signal from HDMI, DisplayPort or the audio from the
  • NEC EA244UHD-BKSV | Users Manual - Page 18
    PICTURE PATTERN Selects split screen mode. You can select up to 4 split screen types. NOTE: This function is only available when MULTI PICTURE is "ON". Only 2 split screen mode, you can choose AUTO or CENTER display mode. 2 split screen (CENTER) Splits 2 screens divided evenly from the center. 2
  • NEC EA244UHD-BKSV | Users Manual - Page 19
    If you select "ON", monitor displays "HUMAN SENSOR ON" message. If you select "OFF", monitor doesn't display "HUMAN SENSOR ON" message. KEY GUIDE If you select "ON", the Key Guide appears on screen when the OSD menu is accessed. DATA COPY To initiate data copy from the master monitor to the sub
  • NEC EA244UHD-BKSV | Users Manual - Page 20
    ECO Information CARBON SAVINGS: Displays the estimated carbon savings information in kg. CARBON USAGE: Displays the estimated carbon usages information in kg. This is the arithmetic estimation, not actual measurement value. COST SAVINGS: Displays the electricity cost savings in balance. CARBON
  • NEC EA244UHD-BKSV | Users Manual - Page 21
    ray imaging view. Setting that conforms to the DICOM simulation for the Grayscale Standard Display Function. For the Hardware Calibration settings by NEC Display Solutions software (some OSD settings are disabled). NOTE: When the selected PICTURE MODE is different from your computer's ICC color pro
  • NEC EA244UHD-BKSV | Users Manual - Page 22
    EA244UHD Formation Time 6 ms (Gray to gray Typ.) Resolutions Supported 720 x 400*1: VGA text Some systems may not support all modes listed. 640 x 480*1 @ 60 @ 30 Hz (HDMI) 3840 x 2160 @ 60 Hz (DisplayPort NEC DISPLAY SOLUTIONS cites recommended. Active Display Area Landscape: Horiz.: Vert.:
  • NEC EA244UHD-BKSV | Users Manual - Page 23
    send its capabilities (such as screen size and resolutions supported) directly to your computer, automatically optimizing display performance operating carbon footprints are calculated by a unique algorithm developed exclusively by NEC for its monitors. ControlSync: Follow the steps of "DATA COPY"
  • NEC EA244UHD-BKSV | Users Manual - Page 24
    Troubleshooting that a supported mode has been selected on the display card or system being used. (Please consult display card or system manual to change erase the image. NOTE: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends using a moving screen saver at regular intervals
  • NEC EA244UHD-BKSV | Users Manual - Page 25
    monitor will also change. USB Hub does not operate • Check to make sure the USB cable is properly connected. Refer to your USB device User's Manual. • Check if the USB upstream port on the monitor is connected to the USB downstream port on the computer. And make sure the computer is
  • NEC EA244UHD-BKSV | Users Manual - Page 26
    TIMER, LED BRIGHTNESS, DDC/CI, USB POWER, LANGUAGE, OSD TURN OFF, OSD LOCK OUT, HOT KEY, SIGNAL INFORMATION, SENSOR INFORMATION, KEY GUIDE, CARBON CONVERT SETTING, CURRENCY SETTING, CURRENCY CONVERT SETTING, UNIFORMITY, UHD UPSCALING. SETUP 1. Touch MENU to show OSD menu. 2. Select MULTI PICTURE
  • NEC EA244UHD-BKSV | Users Manual - Page 27
    English 4. Select ACTIVE PICTURE and choose the adjutable screen. Touch SELECT. 5. Set the input signal shown on the key guide. The adjustable screen is shown on the top of key guide. Then set other settings for the screen. NOTE: If the OSD menu may disappear, touch MENU to show OSD menu. 6. Return
  • NEC EA244UHD-BKSV | Users Manual - Page 28
    Using the Zoom Function Allows you to use the entire screen area, significantly expanding the size. Allows the picture displayed in the center to expand. NOTE: When in MULTI PICTURE, the sub picture is expanded or reduced automatically. SETUP 1. Select FULL or ASPECT in EXPANSION to activate the Zoom
  • NEC EA244UHD-BKSV | Users Manual - Page 29
    English B. The left image is set to be the main one. In this case, the priority image is set to be on the left side. The size of the image on the right side with black area is reduced. To enlarge the split images: use the following procedures to reduce the black area and enlarge the split images.
  • NEC EA244UHD-BKSV | Users Manual - Page 30
    Using the Auto Brightness function The brightness of the LCD screen can be set to increase or decrease depending on the amount of ambient lighting within the room. If the room is bright, the monitor becomes correspondingly bright. If the room is dim, then the monitor will dim accordingly. The
  • NEC EA244UHD-BKSV | Users Manual - Page 31
    FACTORY PRESET No LANGUAGE Yes OSD TURN OFF Yes OSD LOCK OUT Yes HOT KEY Yes SIGNAL INFORMATION Yes SENSOR INFORMATION Yes KEY GUIDE Yes CUSTOMIZE SETTING No CARBON SAVINGS No CARBON USAGE No COST SAVINGS No CARBON CONVERT SETTING Yes CURRENCY SETTING Yes CURRENCY CONVERT
  • NEC EA244UHD-BKSV | Users Manual - Page 32
    resolution. 5. Press MENU to close the OSD menu. 6. Reboot computer. NOTE: NEC has noted that some higher resolution DisplayPort signals can occasionally become unreliable. The typical symptom signals to optimize the native resolution support and therefore improve signal reliability. English-30
  • NEC EA244UHD-BKSV | Users Manual - Page 33
    English TCO Certified Edge Displays 1.2 Congratulations! This product is TCO Certified - for Sustainable IT TCO CertiÞed is an international third party sustainability certiÞcation for IT products. TCO CertiÞed ensures that the manufacture, use and recycling of IT products reßect environmental,
  • NEC EA244UHD-BKSV | Users Manual - Page 34
    guidance of your local authority, or ask the shop where you purchased the product, or if applicable, follow any agreements made between yourself and NEC. The mark on electrical and electronic products only applies to the current European Union Member States. Outside the European Union If you wish to
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
Desktop Monitor
MultiSync EA244UHD
User’s Manual