NEC LCD1990SX-BK MultiSync LCD1990SX-BK : user's manual
NEC LCD1990SX-BK - 1500:1 LCD With DVI Manual
 |
UPC - 683728192501
View all NEC LCD1990SX-BK manuals
Add to My Manuals
Save this manual to your list of manuals |
NEC LCD1990SX-BK manual content summary:
- NEC LCD1990SX-BK | MultiSync LCD1990SX-BK : user's manual - Page 1
MultiSync LCD1990SX User's Manual - NEC LCD1990SX-BK | MultiSync LCD1990SX-BK : user's manual - Page 2
of Conformity ...English-2 Contents ...English-3 Quick Start ...English-4 Controls ...English-8 Recommended use ...English-13 Specifications ...English-15 Features ...English-16 Troubleshooting ...English-17 Appendix ...English-18 Using the Auto Brightness function English-25 TCO'03 ...English-26 - NEC LCD1990SX-BK | MultiSync LCD1990SX-BK : user's manual - Page 3
COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION monitor MultiSync LCD1990SX (L195RR) is in compliance with Council Directive 73/23/EEC: - EN 60950-1 Council Directive 89/336/EEC: - EN 55022 - EN 61000-3-2 - EN 61000-3-3 - EN 55024 and marked with NEC Display Solutions - NEC LCD1990SX-BK | MultiSync LCD1990SX-BK : user's manual - Page 4
2. This equipment has been tested and found to comply with instructions, Problems." NEC Display Solutions of America, Inc. 500 Park Blvd, Suite 1100 Itasca, Illinois 60143 (630) 467-3000 Type of Product: Display Monitor Equipment Classification: Class B Peripheral Models: MultiSync LCD1990SX - NEC LCD1990SX-BK | MultiSync LCD1990SX-BK : user's manual - Page 5
English Contents Your new NEC monitor box* should contain the following: • MultiSync LCD1990SX monitor with tilt/swivel/pivot/height adjust stand • Power Cord • Video Signal Cable (15-pin mini D-SUB male to DVI-A) • Video Signal Cable (DVI-D to DVI-D cable) • User's Manual • CD-ROM • Cable Cover • - NEC LCD1990SX-BK | MultiSync LCD1990SX-BK : user's manual - Page 6
Quick Start To attach the LCD monitor to your system, follow these instructions: 1. Turn off the power to your computer. 2. For the PC or MAC with DVI digital output: Connect the DVI signal cable to the connector of the display card in your system (Figure A.1). Tighten all screws. For the PC with - NEC LCD1990SX-BK | MultiSync LCD1990SX-BK : user's manual - Page 7
. DO NOT switch on/off repeatedly. 10. No-touch auto adjust automatically adjusts the monitor to optimal settings upon initial setup for most timings. Manual for a full description of these OSD controls. NOTE: If you have any problems, please refer to the Troubleshooting section of this User's Manual - NEC LCD1990SX-BK | MultiSync LCD1990SX-BK : user's manual - Page 8
and portrait, refer to "Controls" section. Figure R.1 Tilt Grasp top and bottom sides of the monitor screen with your hands and adjust the tilt as desired (Figure TS.1). Swivel Grasp both sides of the monitor screen with your hands and adjust the swivel as desired (Figure TS.2). NOTE: Figure TS - NEC LCD1990SX-BK | MultiSync LCD1990SX-BK : user's manual - Page 9
method (100 mm pitch). NOTE: Handle with care when removing monitor stand. Up Slide Figure S.2 Flexible Arm Installation This LCD monitor is designed for use with a flexible arm. 1. Follow the instructions on how Remove Monitor Stand for Mounting to remove the stand. 2. Using the 4 screws - NEC LCD1990SX-BK | MultiSync LCD1990SX-BK : user's manual - Page 10
Controls OSD (On-Screen Display) control buttons on the front of the monitor function as follows: To access OSD menu, (Page 22, Tag9 "OSD ROTATION").* 9 KEY GUIDE The Key Guide appears on screen when the OSD control menu is accessed. The Key Guide will rotate when the OSD control menu is rotated. - NEC LCD1990SX-BK | MultiSync LCD1990SX-BK : user's manual - Page 11
monitor with the best BRIGHTNESS setting*1. 2: Adjusts the brightness automatically for the best BRIGHTNESS setting based on the white display this a Moiré test pattern could be used. This function may alter the width of the picture. Use Left/Right Menu to center the image on the screen. If the H. - NEC LCD1990SX-BK | MultiSync LCD1990SX-BK : user's manual - Page 12
instructions. Color Control Systems Colour Control Systems: Seven preset colour settings. For preset settings 1, 2, 3, and 5, the following levels can be adjusted: TEMPERATURE: Adjust the white temperature by increasing or decreasing this setting. A lower colour temperature will make the screen - NEC LCD1990SX-BK | MultiSync LCD1990SX-BK : user's manual - Page 13
monitor will automatically return to normal mode. UNIFORMITY This function electronically compensates for the slight variations in the white uniformity level, as well as for deviations in color that may occur throughout the display area of the screen. These variations are characteristic of LCD panel - NEC LCD1990SX-BK | MultiSync LCD1990SX-BK : user's manual - Page 14
message will appear on the screen after 30 seconds, notifying you (BRIGHTNESS, CONTRAST, ECOMODE, AUTO BRIGHTNESS, BLACK LEVEL, IMAGE CONTROL, COLOR CONTROL SYSTEM, about the current resolution display and technical data including model and serial numbers of your monitor. OSD Warning OSD Warning menus - NEC LCD1990SX-BK | MultiSync LCD1990SX-BK : user's manual - Page 15
image was on the monitor for one hour and a residual image remains, the monitor should be turned off for one hour to erase the image. NOTE: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends using a moving screen saver at regular intervals whenever the screen is idle or turning - NEC LCD1990SX-BK | MultiSync LCD1990SX-BK : user's manual - Page 16
screen, use an anti-glare filter. • Clean the LCD monitor surface with a lint-free, non-abrasive cloth. Avoid using any cleaning solution or glass cleaner! • Adjust the monitor LCD Panel • When the liquid crystal panel is stained with dust or powder, or insecticide. Do not touch rubber or vinyl to the - NEC LCD1990SX-BK | MultiSync LCD1990SX-BK : user's manual - Page 17
Monitor Specifications MultiSync LCD1990SX Monitor Notes LCD Module Diagonal: 48.2 cm/19.0 inches Viewable Image Size: 48.2 cm/19.0 inches Native Resolution (Pixel Count): 1280 x 1024 Active matrix; thin film transistor (TFT) liquid crystal display (LCD); 0.294 mm dot pitch; 250 cd/m2 white - NEC LCD1990SX-BK | MultiSync LCD1990SX-BK : user's manual - Page 18
connect their MultiSync monitor to any VESA standard third party mounting arm or bracket. Allows for the monitor to be mounted on a wall or an arm using any third party compliant device. Visual Controller: Is a ground-breaking software family, developed by NEC Display Solutions, providing intuitive - NEC LCD1990SX-BK | MultiSync LCD1990SX-BK : user's manual - Page 19
the image. NOTE: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends using a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use. Message "OUT OF RANGE" is displayed (screen is either blank or shows rough images only - NEC LCD1990SX-BK | MultiSync LCD1990SX-BK : user's manual - Page 20
Turn off and restart your monitor in the normal way. and screen background white display area. The environmental brightness sensor (Auto dimming sensor) has no function. Note: Do not cover environmental brightness sensor (Auto dimming sensor). Black Level Allows you to manually adjust the black - NEC LCD1990SX-BK | MultiSync LCD1990SX-BK : user's manual - Page 21
then A-NTAA does not activate. The screen will be blank while the monitor optimizes the signal. OPTION: Functions the same as ON, except that the screen does not go blank when the monitor makes adjustments for changes in signal, allowing the monitor to display the new signal faster. When using an - NEC LCD1990SX-BK | MultiSync LCD1990SX-BK : user's manual - Page 22
screen. The image can be expanded past the right and bottom edges of the screen. Allows you to manually black screen reddish and a higher colour temperature will make the screen bluish. WHITE (White Balance): If TEMPERATURE needs further adjustment; the individual R/G/B/ levels of the white LCD panel - NEC LCD1990SX-BK | MultiSync LCD1990SX-BK : user's manual - Page 23
on the monitor. The LED on the front can be blue or green. This function electronically compensates for the slight variations in the white uniformity level as well as for deviations in colour that may occur throughout the display area of the screen. These variations are characteristic of LCD panel - NEC LCD1990SX-BK | MultiSync LCD1990SX-BK : user's manual - Page 24
attempting to activate OSD controls while in the Lock Out mode, a screen will appear indicating the OSD controls are locked out. There are monitor is rotated. OSD ROTATION is set to AUTO by default. MANUAL: To rotate the OSD, press the ROTATE OSD button when the OSD is not showing. AUTO: The display - NEC LCD1990SX-BK | MultiSync LCD1990SX-BK : user's manual - Page 25
No: Select a position to expand the screen. TILE COMP: Works in tandem with Tile Matrix to compensate for the width of the tile bezels in order to accurately display the image. Tile Comp with 4 monitors (black area shows monitor frames): monitor1 monitor2 monitor1 monitor2 TagB Date & Time - NEC LCD1990SX-BK | MultiSync LCD1990SX-BK : user's manual - Page 26
LCD Monitor will be activated. You can select the time the monitor turns on and turns off, the day of week the monitor is activated, and which input source the monitor screen Displays the estimated power saving information in watt-hours. Information Provides information about the current display - NEC LCD1990SX-BK | MultiSync LCD1990SX-BK : user's manual - Page 27
the Auto Brightness function The brightness of the LCD screen can be set to increase or decrease depending on the amount of ambient light within the room. If the room is bright, the monitor becomes correspondingly bright. If the room is dim, then the monitor will dim accordingly. The purpose of this - NEC LCD1990SX-BK | MultiSync LCD1990SX-BK : user's manual - Page 28
carries the TCO'03 Displays label. This means that your display is designed, manufactured and tested according to some of the Display requirements: Ergonomics • Good visual ergonomics and image quality in order to improve the working environment for the user and to reduce sight and strain problems - NEC LCD1990SX-BK | MultiSync LCD1990SX-BK : user's manual - Page 29
of the product and country-specific information on recycling facilities can be found on our following websites: http://www.nec-display-solutions.com/greencompany/ (in Europe), http://www.nec-display.com (in Japan) or http://www.necdisplay.com (in USA). Energy Saving This monitor features an advanced
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
 |
 |
MultiSync LCD1990SX
User’s Manual