NEC LCD2690WUXI User Manual

NEC LCD2690WUXI - MultiSync - 26" LCD Monitor Manual

Get NEC LCD2690WUXI - MultiSync - 26inch LCD Monitor PDF manuals and user guides
UPC - 805736028935
View all NEC LCD2690WUXI manuals
Add to My Manuals
Save this manual to your list of manuals

NEC LCD2690WUXI manual content summary:

  • NEC LCD2690WUXI | User Manual - Page 1
    MultiSync LCD2690WUXi SpectraView 2690 User's Manual
  • NEC LCD2690WUXI | User Manual - Page 2
    of Conformity ...English-2 Contents ...English-3 Quick Start ...English-4 Controls ...English-8 Recommended use ...English-13 Specifications ...English-15 Features ...English-16 Troubleshooting ...English-17 Appendix ...English-18 Using the Auto Brightness function English-25 TCO'03 ...English
  • NEC LCD2690WUXI | User Manual - Page 3
    USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol warns user problems. Caution: When operating the MultiSync LCD2690WUXi or the SpectraView 2690 with a 220-240V AC power source in Europe, use the power cord provided with the monitor. In the UK NEC Display
  • NEC LCD2690WUXI | User Manual - Page 4
    Party: Address: Tel. No.: NEC Display Solutions of America, Inc. 500 Park Blvd, Suite 1100 Itasca, Illinois 60143 (630) 467-3000 Type of Product: Display Monitor Equipment Classification: Class B Peripheral Models: MultiSync LCD2690WUXi and SpectraView 2690 (L266RZ) We hereby declare
  • NEC LCD2690WUXI | User Manual - Page 5
    the following: • MultiSync LCD2690WUXi or SpectraView 2690 monitor with tilt/swivel/pivot/height adjust stand • Power Cord (European Continental) • Power Cord (UK) • Video Signal Cable (15-pin mini D-SUB male to DVI-A) • Video Signal Cable (DVI-D to DVI-D cable) • User's Manual • CD-ROM • Cable
  • NEC LCD2690WUXI | User Manual - Page 6
    monitor to your system, follow these instructions: 1. Turn off the power to your computer. 2. For the PC or MAC with DVI digital output: Connect the DVI signal cable to the connector of the display the display card monitor display the specific hooks using the monitor in Portrait monitor screen and
  • NEC LCD2690WUXI | User Manual - Page 7
    controls: • Auto Contrast (Analog input only) • Auto Adjust (Analog input only) Refer to the Controls section of this User's Manual for a full description of these OSM controls. NOTE: If you have any problems, please refer to the Troubleshooting section of this User's Manual. Vacation Switch Figure
  • NEC LCD2690WUXI | User Manual - Page 8
    height (Figure RL.1). NOTE: Handle with care when raising or lowering the monitor screen. Figure RL.1 Screen Rotation Before rotating, the screen must be raised to raise the screen, place hands on each side of the monitor and lift up to the highest position (Figure RL.1). To rotate screen, place hands on
  • NEC LCD2690WUXI | User Manual - Page 9
    process to reattach stand. NOTE: Handle with care when removing monitor stand. Up Slide Figure S.2 Figure S.3 Flexible Arm Installation This LCD monitor is designed for use with a flexible arm. 1. Follow the instructions on how Remove Monitor Stand for Mounting to remove the stand. 2. Using the
  • NEC LCD2690WUXI | User Manual - Page 10
    input. 8 7 Landscape 123 4 5 6 9 Portrait 1 AMBIBRIGHT SENSOR 2 POWER 3 LED 4 INPUT/SELECT 5 EXIT 6 LEFT/RIGHT 7 UP/DOWN 8 RESET/ROTATE OSM 9 KEY GUIDE Detects the level of ambient lighting allowing the monitor CONTRAST (Analog input only) Adjusts the image displayed for non-standard video
  • NEC LCD2690WUXI | User Manual - Page 11
    user. Refer to the Advanced OSM menu for custom setting instructions monitor with the best BRIGHTNESS setting*1. 2: Adjusts the brightness automatically for the best BRIGHTNESS setting based on the white display (Analog input only) test pattern could be used. If the Fine value is wrongly calibrated
  • NEC LCD2690WUXI | User Manual - Page 12
    , select "OFF". ON: When a DVD player or other type of high definition device is connected, select "ON". NOTE: Interlaced signals (480i, 576i, 1080i) are not supported. If you have any problems, please refer to the Troubleshooting section of this User's Manual. English-10
  • NEC LCD2690WUXI | User Manual - Page 13
    input has to be switched to the "LAST" mode. When the monitor is displaying a signal from the current source and a new secondary source is supplied to the monitor, then the monitor appear on your screen. Selecting OSM Location allows you to manually adjust the position of the OSM control menu Up or
  • NEC LCD2690WUXI | User Manual - Page 14
    a change of input signal or the video signal doesn't have proper timing, the Out Of Range menu will appear. PORTRAIT WARNING: When the monitor is used in change the HDCP CONTENT settings while the "NO SIGNAL" or "OUT OF RANGE" messages are displayed. For advanced user menu see "Appendix". English-12
  • NEC LCD2690WUXI | User Manual - Page 15
    COLOUR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts displayed. For example, if an image was on the monitor for one hour and a residual image remains, the monitor should be turned off for one hour to erase the image. NOTE: As with all personal display devices, NEC DISPLAY
  • NEC LCD2690WUXI | User Manual - Page 16
    (the screen or reference material) directly in front of you to minimize turning your head while you are typing. • Avoid displaying fixed patterns on the monitor for long periods of time to avoid image persistence (after-image effects). • Get regular eye checkups. Ergonomics To realize the maximum
  • NEC LCD2690WUXI | User Manual - Page 17
    English Monitor Specifications MultiSync LCD2690WUXi and SpectraView 2690 Monitor Notes LCD Module Diagonal: 64.9 cm/25.5 inches Viewable Image Size: 64.9 cm/25.5 inches Native Resolution (Pixel Count): 1920 x 1200 Active matrix; thin film transistor (TFT) liquid crystal display (LCD
  • NEC LCD2690WUXI | User Manual - Page 18
    : Allows users to connect their MultiSync monitor to any VESA standard third party mounting arm or bracket. Allows for the monitor to be mounted on a wall or an arm using any third party compliant device. NaViSet: Is a ground-breaking software family, developed by NEC Display Solutions Europe
  • NEC LCD2690WUXI | User Manual - Page 19
    supported mode has been selected on the display card or system being used. (Please consult display card or system manual to change graphics mode.) • Check the monitor and your display User's Manual display is equipped with the ability to self diagnose abnormalities. When the LCD detects a problem
  • NEC LCD2690WUXI | User Manual - Page 20
    detailed information about the controls, please use the advanced menu. • Turn off your monitor. • Turn on your monitor by pushing the "POWER" and "INPUT/SELECT" button at the same time for at least one second simultaneously. Then press the control buttons (EXIT, LEFT
  • NEC LCD2690WUXI | User Manual - Page 21
    the new signal faster. When using an external switching device to connect 2 or more PCs to the monitor, using the ON or OPTION settings is suitable. Controls Horizontal Image Position within the display area of the LCD. Press "Left" or "Right" to adjust. Controls Vertical Image Position within the
  • NEC LCD2690WUXI | User Manual - Page 22
    (Analog input only) Fine (Analog input only) Auto Fine (Analog input only) For this a Moiré test pattern could be used. If the Fine value is wrongly calibrated, the result would look and bottom edges of the screen. Allows you to manually select the brightness level of grayscale. There are five
  • NEC LCD2690WUXI | User Manual - Page 23
    are not supported. If you have any problems, please refer to the Troubleshooting section of this User's Manual. Selects input has to be switched to the "LAST" mode. When the monitor is displaying a signal from the current source and a new secondary source is supplied to the monitor, then the monitor
  • NEC LCD2690WUXI | User Manual - Page 24
    monitor. The LED on the front can be blue or green. This function electronically compensates for the slight variations in the white uniformity level as well as for deviations in colour that may occur throughout the display you to manually adjust the position DISABLE for POWER KEY, INPUT SEL, HOT KEY
  • NEC LCD2690WUXI | User Manual - Page 25
    the R/G/B LUT. MODE2: Input is R/G/B Colour, but monitor changes the colour space to YUV. The Display Image will become monochrome, because only Y data passes the R/G/B LUT. AUTO: The OSM rotates automatically when the monitor is rotated. OSM ROTATION is set to AUTO by default. MANUAL: To rotate the
  • NEC LCD2690WUXI | User Manual - Page 26
    display the image. Tile Comp with 4 monitors (black area shows monitor time slot. If there is no input selected ("-----" showing in the input spot) the input from the previous schedule will be used off, a message will appear on the screen asking the user if they want to delay the turn off time by
  • NEC LCD2690WUXI | User Manual - Page 27
    monitor becomes correspondingly bright. If the room is dim, then the monitor monitor will use when the that the monitor will go level of brightness that the monitor will go down to when the monitor to use when ambient lighting level is high (L1>Lb) L2 : BRIGHTNESS level set for the monitor
  • NEC LCD2690WUXI | User Manual - Page 28
    environment. Some of the features of the TCO'03 Display requirements: Ergonomics • Good visual ergonomics and image quality in order to improve the working environment for the user and to reduce sight and strain problems. Important parameters are luminance, contrast, resolution, reflectance, colour
  • NEC LCD2690WUXI | User Manual - Page 29
    of the product and country-specific information on recycling facilities can be found on our following websites: http://www.nec-display-solutions.com/greencompany/ (in Europe), http://www.nec-display.com (in Japan) or http://www.necdisplay.com (in USA). Energy Saving This monitor features an advanced
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
MultiSync LCD2690WUXi
SpectraView 2690
User’s Manual