NEC LED-E015i-135IN User Manual
NEC LED-E015i-135IN Manual
 |
View all NEC LED-E015i-135IN manuals
Add to My Manuals
Save this manual to your list of manuals |
NEC LED-E015i-135IN manual content summary:
- NEC LED-E015i-135IN | User Manual - Page 1
User's Manual LED Module [Models for indoor use] LED-E012i LED-E015i LED-E018i LED-E025i MODELS: LED-E012i, LED-E015i, LED-E018i, LED-E025i - NEC LED-E015i-135IN | User Manual - Page 2
Table of Contents Important Information English-1 About the LED lamps English-4 Lamp break-in ...English-4 Contents English-5 Related Items for Installation English-6 Parts Name English-7 Wiring English-8 Specifications English-9 Diagram English-10 - NEC LED-E015i-135IN | User Manual - Page 3
About the Symbols To ensure safe and proper use of the product, this manual uses a number of symbols to prevent injury to you and others as well described below. Be sure to understand them thoroughly before reading this manual. WARNING CAUTION Failing to heed this symbol and handling the product - NEC LED-E015i-135IN | User Manual - Page 4
In case foreign matter has entered into the product, immediately disconnect the power supply and stop using the product. After the installation, if a problem such as loose screws occurs, immediately ask a technician or your retailer for repair. Do not put objects into the product. Otherwise, it may - NEC LED-E015i-135IN | User Manual - Page 5
near heaters. This product is designed to be used indoors. Do not use it outdoors. Otherwise, it may cause a malfunction. This product can only be serviced in the country where it was purchased. English - 3 - NEC LED-E015i-135IN | User Manual - Page 6
About the LED lamps LED lamps are sensitive to static electricity and surge voltage, which may damage their components and decrease their reliability. Take measures against static electricity during the installation. Do not touch the LED display areas. The LED lamps may absorb and hold moisture - NEC LED-E015i-135IN | User Manual - Page 7
Contents The supplied parts are as follows. In case one of these parts is missing or damaged, contact the retailer. [Cabinet] [Pixel card] 4 cards per cabinet English - 5 - NEC LED-E015i-135IN | User Manual - Page 8
to the LED controller To connect two LED modules together [Cabinet alignment bracket] [Connection screw for LED modules] [USB drive] Contains the data, the user's manual (this document), and the control software for the product you have purchased. English - 6 - NEC LED-E015i-135IN | User Manual - Page 9
Parts Name 1 34 5 2 5 34 1 Pixel card 2 Cabinet 3 LAN cable input/output 4 LAN cable input (not used with this product) 5 Power cord input/output English - 7 - NEC LED-E015i-135IN | User Manual - Page 10
Wiring (1) Maximum number of signal connections The maximum number of connections per LAN cable is shown below. Product name Maximum number of connections LED-E012i 4 modules LED-E015i 7 modules LED-E018i 10 modules LED-E025i 17 modules CAUTION The maximum number of connections may - NEC LED-E015i-135IN | User Manual - Page 11
Specifications LED configuration Pixel pitch Number of displayed pixels (resolution/module) Brightness Contrast ratio Brightness adjustment range Gamma correction Color temperature Viewing angle Signal interface Signal input Signal output Power supply Power consumption (all white, 100% - NEC LED-E015i-135IN | User Manual - Page 12
337.5 Diagram LED-E012i / LED-E015i / LED-E018i / LED-E025i 29 600 (Unit: mm) English - 10 - NEC LED-E015i-135IN | User Manual - Page 13
to EU directive 2006/66/EC and amendments, the battery can't be disposed improperly. The battery shall be separated to collect by local service. Service & Support in Europe Please contact: Sharp NEC Display Solutions Europe GmbH. Landshuter Allee 12-14, D-80637 München Phone: + 49 (0) 89/99699-0 Fax
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
 |
 |
User’s Manual
LED Module
[Models for indoor use]
LED-E012i
LED-E015i
LED-E018i
LED-E025i
MODELS: LED-E012i, LED-E015i, LED-E018i, LED-E025i